EN 12534:1999
(Main)Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels - Classification
Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels - Classification
This standard specifies requirements for classification of wire electrodes, wires, rods and weld deposits in the as-welded or stress relieved condition for gas shielded metal arc welding and gas tungsten arc welding of steels with a minimum yield strength higher than 500 N/mm2. The classification of the wire electrodes, wires and rods is based on their chemical composition. The classification of a weld deposit is based on tests of the all-weld metal in the as-welded or stress relieved condition.
Schweißzusätze - Drahtelektroden, Drähte, Stäbe und Schweißgut zum Schutzgasschweißen von hochfesten Stählen - Einteilung
Diese Norm legt Anforderungen für die Einteilung von Drahtelektroden, Drähten und Stäben und Schweißgut im Schweißzustand oder im spannungsarm geglühten Zustand für das Metall-Schutzgasschweißen und Wolfram-Inertgaschweißen von Stählen mit eienr Mindeststreckgrenze größer als 500 N/mm2 fest. Drahtelektroden, Drähte und Stäbe werden nach ihrer chemischen Zusammensetzung eingeteilt. Die Einteilung des Schweißgutes basiert auf Prüfungen des reinen Schweißgutes im Schweißzustand oder im spannungsarm geglühten Zustand. Eine Drahtelektrode kann mit verschiedenen Gasen geprüft und eingeteilt werden.
Produits consommables pour le soudage - Fils-électrodes, fils baguettes et dépôts en soudage à l'arc sous protection gazeuse des aciers à haute résistance - Classification
La présente norme spécifie les exigences pour la classification des fils-électrodes, fils et baguettes et du métal déposé à l'état brut de soudage ou à l'état détensionné, pour le soudage sous protection gazeuse avec électrode fusible et électrode de tungstène des aciers ayant une limite d'élasticité minimale supérieure à 500 N/mm2. La classification des fils-électrodes, fils et baguettes est établie sur leur composition chimique. La classification d'un métal déposé repose sur des essais du métal déposé hors dilution à l'état brut de soudage ou à l'état détensionné.
Dodajni in pomožni materiali - Žice in palice ter vari za obločno varjenje visokotrdnostnih jekel v zaščitnih plinih - Razvrščanje
General Information
- Status
- Withdrawn
- Publication Date
- 17-Aug-1999
- Withdrawal Date
- 20-Feb-2007
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121/WG 3 - Welding consumables
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 21-Feb-2007
- Completion Date
- 21-Feb-2007
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 12534:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels - Classification". This standard covers: This standard specifies requirements for classification of wire electrodes, wires, rods and weld deposits in the as-welded or stress relieved condition for gas shielded metal arc welding and gas tungsten arc welding of steels with a minimum yield strength higher than 500 N/mm2. The classification of the wire electrodes, wires and rods is based on their chemical composition. The classification of a weld deposit is based on tests of the all-weld metal in the as-welded or stress relieved condition.
This standard specifies requirements for classification of wire electrodes, wires, rods and weld deposits in the as-welded or stress relieved condition for gas shielded metal arc welding and gas tungsten arc welding of steels with a minimum yield strength higher than 500 N/mm2. The classification of the wire electrodes, wires and rods is based on their chemical composition. The classification of a weld deposit is based on tests of the all-weld metal in the as-welded or stress relieved condition.
EN 12534:1999 is classified under the following ICS (International Classification for Standards) categories: 25.160.20 - Welding consumables. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12534:1999 has the following relationships with other standards: It is inter standard links to EN ISO 16834:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12534:1999 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12534:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schweißzusätze - Drahtelektroden, Drähte, Stäbe und Schweißgut zum Schutzgasschweißen von hochfesten Stählen - EinteilungProduits consommables pour le soudage - Fils-électrodes, fils baguettes et dépôts en soudage a l'arc sous protection gazeuse des aciers a haute résistance - ClassificationWelding consumables - Wire electrodes, wires, rods and deposits for gas shielded m
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...