EN ISO 8662-6:1995
(Main)Hand-held portable power tools - Measurement of vibrations at the handle - Part 6: Impact drills (ISO 8662-6:1994)
Hand-held portable power tools - Measurement of vibrations at the handle - Part 6: Impact drills (ISO 8662-6:1994)
This part of ISO 8662 specifies a laboratory method of measuring the vibrations occurring at the handles of hand-held power driven impact drills. It is a type test procedure for establishing the magnitude of vibrations at the handles of impact drills operating under a specified load. It is intended that the results can be used to compare different power tools or different models of the same type of power tool.
Handgehaltene motorbetriebene Maschinen - Messung mechanischer Schwingungen am Handgriff - Teil 6: Schlagbohrmaschinen (ISO 8662-6:1994)
Dieser Teil von ISO 8662 legt ein Labor-Meßverfahren zur Messung von Schwingungen an den Handgriffen von handgehaltenen motorbetriebenen Schlagbohrmaschinen fest. Es handelt sich um ein Meßverfahren zur Ermittlung von Schwingungskennwerten am Handgriff von Schlagbohrmaschinen, die unter vorgegebener Belastung arbeiten. Der Zweck besteht darin, die Kennwerte zum Vergleich verschiedener Maschinenarten oder unterschiedlicher Modelle derselben Maschienart zu verwenden.
Machines à moteur portatives - Mesurage des vibrations au niveau des poignées - Partie 6: Perceuses à percussion (ISO 8662-6:1994)
L'IEC 61158-5-17:2007 définit les services fournis à: l'utilisateur de FAL à la frontière entre l'utilisateur et la Couche Application du modèle de référence de bus de terrain; et la Gestion des systèmes au niveau de la frontière entre la Couche Application et la Gestion des systèmes selon le Modèle de référence de bus de terrain. Elle spécifie la structure et les services de la Couche Application des bus de terrain CEI, en conformité avec le Modèle de référence de base de l'OSI (ISO/CEI 7498) et la Structure de la couche application de l'OSI (ISO/CEI 9545). La présente première édition et ses parties connexes de la sous-série CEI 61158-5 annulent et remplacent la CEI 61158 5:2003. Cette édition de la présente partie constitue un supplément technique. La présente partie et ses parties compagnes Type 17 annulent et remplacent la CEI/PAS 62405. Elle inclut les modifications suivantes: suppression du précédent bus de terrain Type 6 en raison du manque de pertinence commerciale; ajout de nouveaux types de bus de terrain; division de la Partie 5 de la troisième édition en plusieurs parties numérotées -5 2, -5 3, La présente version bilingue (2014-06) correspond à la version anglaise monolingue publiée en 2007-12.
Gnana ročna orodja - Meritve vibracij na ročajih - 6. del: Udarni vrtalniki (ISO 8662-6:1994)
General Information
- Status
- Withdrawn
- Publication Date
- 12-Apr-1995
- Withdrawal Date
- 14-Dec-2009
- Technical Committee
- CEN/TC 231 - Mechanical vibration and shock
- Drafting Committee
- CEN/TC 231/WG 2 - Hand-arm vibration
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 15-Dec-2009
- Completion Date
- 15-Dec-2009
- Directive
- 89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 19-Dec-2009
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
NSF International
Global independent organization facilitating standards development and certification.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
Sponsored listings
Frequently Asked Questions
EN ISO 8662-6:1995 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hand-held portable power tools - Measurement of vibrations at the handle - Part 6: Impact drills (ISO 8662-6:1994)". This standard covers: This part of ISO 8662 specifies a laboratory method of measuring the vibrations occurring at the handles of hand-held power driven impact drills. It is a type test procedure for establishing the magnitude of vibrations at the handles of impact drills operating under a specified load. It is intended that the results can be used to compare different power tools or different models of the same type of power tool.
This part of ISO 8662 specifies a laboratory method of measuring the vibrations occurring at the handles of hand-held power driven impact drills. It is a type test procedure for establishing the magnitude of vibrations at the handles of impact drills operating under a specified load. It is intended that the results can be used to compare different power tools or different models of the same type of power tool.
EN ISO 8662-6:1995 is classified under the following ICS (International Classification for Standards) categories: 13.160 - Vibration and shock with respect to human beings; 25.140.01 - Hand-held tools in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 8662-6:1995 has the following relationships with other standards: It is inter standard links to EN ISO 28927-5:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 8662-6:1995 is associated with the following European legislation: EU Directives/Regulations: 89/392/EEC, 98/37/EC; Standardization Mandates: M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 8662-6:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2000
*QDQDURþQDRURGMD0HULWYHYLEUDFLMQDURþDMLKGHO 8GDUQLYUWDOQLNL ,62
Hand-held portable power tools - Measurement of vibrations at the handle - Part 6:
Impact drills (ISO 8662-6:1994)
Handgehaltene motorbetriebene Maschinen - Messung mechanischer Schwingungen am
Handgriff - Teil 6: Schlagbohrmaschinen (ISO 8662-6:1994)
Machines a moteur portatives - Mesurage des vibrations au niveau des poignées - Partie
6: Perceuses a percussion (ISO 8662-6:1994)
Ta slovenski standard je istoveten z: EN ISO 8662-6:1995
ICS:
13.160 Vpliv vibracij in udarcev na Vibration and shock with
ljudi respect to human beings
25.140.01 5RþQDRURGMDQDVSORãQR Hand-held tools in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...