CEN/TS 13126-6:2004
(Main)Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 6: Variable geometry stay hinges (with or without a friction system)
Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 6: Variable geometry stay hinges (with or without a friction system)
This Part of prCEN/TS 13126 specifies the requirements and test methods for durability, strength, security and function of mechanically operated variable geometry stay hinges (with or without a friction system).
NOTE 1 Balancing stay arms / hinges do not represent a friction system.
NOTE 2 For the purpose of this standard the friction system is achieved by friction pads or similar.
Baubeschläge, Beschläge für Fenster und Fenstertüren - Anforderungen und Prüfverfahren - Teil 6: Scheren mit veränderlicher Geometrie (mit oder ohne Friktionssystem)
Dieser Teil von prCEN/TS 13126 legt die Anforderungen an und Prüfverfahren für die Dauerfunktionstüchtig-keit, Festigkeit, Schutzwirkung und Funktionsweise von mechanisch betätigten Scheren mit veränderlicher Geometrie (mit oder ohne Friktionssystem) fest.
ANMERKUNG 1 Aussteller/Ausstellscheren stellen kein Friktionssystem dar.
ANMERKUNG 2 Für die Anwendung dieser Norm wird das Friktionssystem durch Bremsplatten oder etwas gleichartiges erreicht.
Quincaillerie pour le bâtiment, ferrures de fenêtres et portes-fenêtres - Exigences et méthodes d'essai - Partie 6: Compas à friction à géométrie variable (avec ou sans système de friction)
La présente partie du CEN/TS 13126 spécifie les exigences et méthodes d'essai relatives à l'endurance, à la résistance, à la sécurité des biens et au fonctionnement des compas mécaniques à géométrie variable (avec ou sans système de friction).
NOTE 1 Les compas ou bras de compas d'équilibrage ne constituent pas des système de friction.
NOTE 2 Au sens de la présente norme, la friction est assurée par des patins de friction ou des pièces similaires.
Stavbno okovje, pritrjevalni sistemi za okna in zastekljena vrata – Zahteve in preskusne metode – 6. del: Oporni tečaji z različno geometrijo (s sistemom trenja ali brez njega)
General Information
- Status
- Withdrawn
- Publication Date
- 06-Apr-2004
- Withdrawal Date
- 11-Nov-2008
- Technical Committee
- CEN/TC 33 - Doors, windows, shutters and building hardware
- Drafting Committee
- CEN/TC 33/WG 4 - Building hardware
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 12-Nov-2008
- Completion Date
- 12-Nov-2008
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
BBA (British Board of Agrément)
UK construction product certification.
Sponsored listings
Frequently Asked Questions
CEN/TS 13126-6:2004 is a technical specification published by the European Committee for Standardization (CEN). Its full title is "Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 6: Variable geometry stay hinges (with or without a friction system)". This standard covers: This Part of prCEN/TS 13126 specifies the requirements and test methods for durability, strength, security and function of mechanically operated variable geometry stay hinges (with or without a friction system). NOTE 1 Balancing stay arms / hinges do not represent a friction system. NOTE 2 For the purpose of this standard the friction system is achieved by friction pads or similar.
This Part of prCEN/TS 13126 specifies the requirements and test methods for durability, strength, security and function of mechanically operated variable geometry stay hinges (with or without a friction system). NOTE 1 Balancing stay arms / hinges do not represent a friction system. NOTE 2 For the purpose of this standard the friction system is achieved by friction pads or similar.
CEN/TS 13126-6:2004 is classified under the following ICS (International Classification for Standards) categories: 91.190 - Building accessories. The ICS classification helps identify the subject area and facilitates finding related standards.
CEN/TS 13126-6:2004 has the following relationships with other standards: It is inter standard links to EN 13126-6:2008, EN ISO 10374:1997, EN 15859:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
CEN/TS 13126-6:2004 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
CEN/TS 13126-6:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...