EN ISO 15877-5:2009/A2:2020
(Amendment)Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes Polyvinylchlorid (PVC-C) - Teil 5: Gebrauchstauglichkeit des Systems - ÄNDERUNG 2 (ISO 15877-5:2009/Amd 2:2020)
No scope available
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 5: Aptitude à l'emploi du système - Amendement 2 (ISO 15877-5:2009/Amd 2:2020)
Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Klorirani polivinilklorid (PVC-C) - 5. del: Ustrezanje zahtevam za uporabnost sistema - Dopolnilo A2 (ISO 15877-5:2009/Amd 2:2020)
General Information
Relations
Overview
EN ISO 15877-5:2009/A2:2020 is Amendment 2 to Part 5 of ISO 15877, the European/ISO standard for plastics piping systems for hot and cold water installations made from chlorinated poly(vinyl chloride) (PVC‑C). This amendment updates normative references and test parameters used to demonstrate the fitness for purpose of the system. The amendment was approved by CEN on 12 October 2020 and integrated into national standards by mid‑2021.
Key topics and requirements
- Updated normative references - several EN references are replaced by ISO standards:
- EN 712 → ISO 3501 (pull‑out resistance test for mechanical joints)
- EN 12293 → ISO 19893 (thermal cycling test for mounted assemblies)
- EN 12294 → ISO 13056 (leaktightness under vacuum)
- EN 12295 → ISO 19892 (pressure cycling)
- Thermal cycling parameters for PVC‑C assemblies:
- Defines maximum design and highest/lowest test temperatures per application class (examples: highest test temperature up to 95 °C, lowest 20 °C).
- Specifies cycle durations (e.g., 15 min at high + 15 min at low = 30 min; or 150 + 150 = 300 min) and cycle counts (typically 5 000 cycles for diameters ≤160 mm; 500 cycles for >160 mm).
- Requires representative assembly configurations and minimum free pipe lengths between joints.
- Pressure cycling parameters (ISO 19892):
- Test temperature: 23 °C; no leakage permitted.
- Frequencies: ~30 ±5 cycles/min (d ≤160 mm) and ~15 ±3 cycles/min (d >160 mm).
- Cycle counts: 10 000 (d ≤160 mm) and 5 000 (d >160 mm).
- Test pressure limits tied to design pressure (e.g., for 4 bar design: upper 6.0 bar / lower 0.5 bar; for 10 bar design: upper 15.0 bar / lower 0.5 bar).
Applications and users
This amendment is essential for:
- Manufacturers of PVC‑C pipes, fittings and joint systems - for type testing and product validation.
- Test laboratories - to perform thermal cycling, pressure cycling, pull‑out and vacuum tests to the updated methods.
- Specifiers, consultants and installers - for selecting compliant PVC‑C systems for hot/cold water and sanitary installations.
- Regulators and certification bodies - to assess conformity and system fitness for purpose in potable and non‑potable water supply applications.
Related standards
- ISO 3501 - Mechanical joints: pull‑out resistance
- ISO 19893 - Thermal cycling of mounted assemblies
- ISO 19892 - Pressure cycling for joints
- ISO 13056 - Leaktightness under vacuum
Keywords: EN ISO 15877-5, ISO 15877-5:2009/Amd 2:2020, PVC‑C, plastics piping systems, fitness for purpose, thermal cycling, pressure cycling, water installations, CEN.
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2021
Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo -
Klorirani polivinilklorid (PVC-C) - 5. del: Ustrezanje zahtevam za uporabnost
sistema - Dopolnilo A2 (ISO 15877-5:2009/Amd 2:2020)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl
chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877
-5:2009/Amd 2:2020)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes
Polyvinylchlorid (PVC-C) - Teil 5: Gebrauchstauglichkeit des Systems - ÄNDERUNG 2
(ISO 15877-5:2009/Amd 2:2020)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Poly(chlorure de vinyle) chloré (PVC-C) - Partie 5: Aptitude à l'emploi du système -
Amendement 2 (ISO 15877-5:2009/Amd 2:2020)
Ta slovenski standard je istoveten z: EN ISO 15877-5:2009/A2:2020
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 15877-5:2009/A2
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2020
EUROPÄISCHE NORM
ICS 23.040.01; 91.140.60
English Version
Plastics piping systems for hot and cold water installations
- Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness
for purpose of the system - Amendment 2 (ISO 15877-
5:2009/Amd 2:2020)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Poly(chlorure de Kaltwasserinstallation - Chloriertes Polyvinylchlorid
vinyle) chloré (PVC-C) - Partie 5: Aptitude à l'emploi du (PVC-C) - Teil 5: Gebrauchstauglichkeit des Systems -
système - Amendement 2 (ISO 15877-5:2009/Amd ÄNDERUNG 2 (ISO 15877-5:2009/Amd 2:2020)
2:2020)
This amendment A2 modifies the European Standard EN ISO 15877-5:2009; it was approved by CEN on 12 October 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15877-5:2009/A2:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 15877-5:2009/A2:2020) has been prepared by Technical Committee ISO/TC
138 "Plastics pipes, fittings and valves for the transport of fluids" in collaboration with Technical
Committee CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held
by NEN.
This Amendment to the European Standard EN ISO 15877-5:2009 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2021, and
conflicting national standards shall be withdrawn at the latest by June 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 15877-5:2009/Amd 2:2020 has been approved by CEN as EN ISO 15877-
5:2009/A2:2020 without any modification.
INTERNATIONAL ISO
STANDARD 15877-5
Second edition
2009-03-15
AMENDMENT 2
2020-11
Plastics piping systems for hot and
cold water installations — Chlorinated
poly(vinyl chloride) (PVC-C) —
Part 5:
Fitness for purpose of the system
AMENDMENT 2
Systèmes de canalisations en plastique pour les installations d'eau
chaude et froide — Poly(chlorure de vinyle) chloré (PVC-C) —
Partie 5: Aptitude à l'emploi du système
AMENDEMENT 2
Reference number
ISO 15877-5:2009/Amd.2:2020(E)
©
ISO 2020
ISO 15877-5:2009/Amd.2:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested
...
Frequently Asked Questions
EN ISO 15877-5:2009/A2:2020 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 2 (ISO 15877-5:2009/Amd 2:2020)". This standard covers: No scope available
No scope available
EN ISO 15877-5:2009/A2:2020 is classified under the following ICS (International Classification for Standards) categories: 23.040.01 - Pipeline components and pipelines in general; 91.140.60 - Water supply systems. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 15877-5:2009/A2:2020 has the following relationships with other standards: It is inter standard links to EN ISO 15877-5:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN ISO 15877-5:2009/A2:2020 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...