iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 11199-2:2021/prA1

(Amendment)

Assistive products for walking manipulated by both arms - Requirements and test methods - Part 2: Rollators - Amendment 1: Eliminate brake requirements in 6.5 Structure requirements (ISO 11199 2:2021/DAM 1:2024)

Assistive products for walking manipulated by both arms - Requirements and test methods - Part 2: Rollators - Amendment 1: Eliminate brake requirements in 6.5 Structure requirements (ISO 11199 2:2021/DAM 1:2024)

This document specifies requirements and test methods of rollators being used as assistive products for walking with wheels, manipulated by both arms, without accessories, unless specified in the particular test procedure. This document also gives requirements relating to safety, ergonomics, performance and information supplied by the manufacturer including marking and labelling.
The requirements and tests are based on every-day use of rollators as assistive products for walking for a maximum user mass as specified by the manufacturer. This document includes rollators specified for a user mass of no less than 35 kg.
This document is not applicable to rollators with horizontal forearm supports, classified as walking tables, for which ISO 11199-3 is applicable.

Technische Hilfen zum Gehen für beidarmige Handhabung - Anforderungen und Prüfverfahren - Teil 2: Rollatoren - Änderung 1: Streichung der Anforderungen an die Bremsen in 6.5 Bauliche Anforderungen (ISO 11199 2:2021/DAM 1:2024)

Produits d’assistance à la marche manipulés avec les deux bras - Exigences et méthodes d’essai - Partie 2: Déambulateurs - Amendement 1: Supprimer les exigences relatives aux freins en 6.5 Exigences relatives à la structure (ISO 11199 2:2021/DAM 1:2024)

Pripomočki za hojo, ki se upravljajo z obema rokama - Zahteve in preskusne metode - 2. del: Rolatorji - Dopolnilo A1: Odprava zahtev za zavore v 6.5 Zahteve za strukturo (ISO 11199 2:2021/DAM 1:2024)

General Information

Status
Not Published
Publication Date
12-Oct-2025
ICS
11.180.10 - Aids and adaptation for moving
Technical Committee
CEN/TC 293 - Technical aids for disabled persons
Drafting Committee
CEN/TC 293/WG 1 - Walking aids
Current Stage
6055 - CEN Ratification completed (DOR) - Publishing
Start Date
08-Jul-2024
Completion Date
08-Jul-2024
Ref Project
SIST EN ISO 11199-2:2021/oprA1:2024 - Assistive products for walking manipulated by both arms - Requirements and test methods - Part 2: Rollators - Amendment 1: Eliminate brake requirements in 6.5 Structure requirements (ISO 11199 2:2021/DAM 1:2024)

Relations

Amends
EN ISO 11199-2:2021 - Assistive products for walking manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:2021)
Effective Date
04-Oct-2023

Buy Standard

EN ISO 11199-2:2021/oprA1:2024EN ISO 11199-2:2021/oprA1:2024
PreviousNext
Draft
EN ISO 11199-2:2021/oprA1:2024
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2024
Pripomočki za hojo, ki se upravljajo z obema rokama - Zahteve in preskusne
metode - 2. del: Rolatorji - Dopolnilo A1: Odprava zahtev za zavore v 6.5 Zahteve
za strukturo (ISO 11199 2:2021/DAM 1:2024)
Assistive products for walking manipulated by both arms - Requirements and test
methods - Part 2: Rollators - Amendment 1: Eliminate brake requirements in 6.5
Structure requirements (ISO 11199 2:2021/DAM 1:2024)
Technische Hilfen zum Gehen für beidarmige Handhabung - Anforderungen und
Prüfverfahren - Teil 2: Rollatoren - Änderung 1: Streichung der Anforderungen an die
Bremsen in 6.5 Bauliche Anforderungen (ISO 11199 2:2021/DAM 1:2024)
Produits d’assistance à la marche manipulés avec les deux bras - Exigences et
méthodes d’essai - Partie 2: Déambulateurs - Amendement 1: Supprimer les exigences
relatives aux freins en 6.5 Exigences relatives à la structure (ISO 11199 2:2021/DAM
1:2024)
Ta slovenski standard je istoveten z: EN ISO 11199-2:2021/prA1
ICS:
11.180.10 Pripomočki in prilagoditve za Aids and adaptation for
gibanje moving
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
Amendment
ISO 11199-2:2021/
DAM 1
ISO/TC 173
Assistive products for walking
Secretariat: SIS
manipulated by both arms —
Requirements and test methods —
Voting begins on:
2024-03-15
Part 2:
Voting terminates on:
Rollators 2024-06-07
AMENDMENT 1: Eliminate brake
requirements in 6.5 Structure
requirements
ICS: 11.180.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO 11199-2:2021/DAM 1:2024(en)
DRAFT
ISO 11199-2:2021/DAM 1:2024(en)
Amendment
ISO 11199-2:2021/
DAM 1
ISO/TC 173
Assistive products for walking
Secretariat: SIS
ma
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12184:2022(Main)
Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods
SIST EN 12184:2022

This document specifies requirements and test methods for electrically powered wheelchairs, with a maximum speed not exceeding 20 km/h, intended to carry one person of mass not less than 25 kg and not greater than 300 kg, including
- electrically powered scooters with three or more wheels,
- manual wheelchairs with an add-on electrically powered drive system,
- handrim-activated power-assisted wheelchairs,
- electrically powered stand-up wheelchairs,
- wheelchairs with a pivot drive wheel unit, and
- push-assist wheelchairs.
This document does not apply to balancing wheelchairs, custom-made electrically powered wheelchairs or electrically powered wheelchairs intended for use in sports.
This document also specifies requirements and test methods for manual wheelchairs with electrically powered ancillary equipment.

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12183:2022(Main)
Manual wheelchairs - Requirements and test methods
SIST EN 12183:2022

This document specifies requirements and test methods for manual wheelchairs intended to carry one person of mass not less than 25 kg and not greater than 250 kg, including
- stand-up manual wheelchairs, and
- manual wheelchairs whose intended use includes showering and/or toileting.
This document does not apply to custom-made manual wheelchairs, manual wheelchairs intended for use in sports, or manual wheelchairs intended only for showering and/or toileting.
This document also specifies requirements and test methods for manual wheelchairs with electrically powered ancillary equipment.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10535:2021(Main)
Assistive products - Hoists for the transfer of persons - Requirements and test methods (ISO 10535:2021, Corrected version 2023-08)
SIST EN ISO 10535:2022

This document specifies requirements and test methods for hoists and body-support units intended for the transfer of persons with disabilities. The document applies to the following products classified in ISO 9999:—[1].
—    12 36 03 Mobile hoists for transferring a person in sitting position with sling seats;
—    12 36 04 Mobile hoists for transferring a person in standing position;
—    12 36 06 Mobile hoists for transferring a person in sitting position with solid seats;
—    12 36 09 Mobile hoists for transferring a person in lying position;
—    12 36 12 Stationary hoists fixed to walls, floor or ceiling;
—    12 36 15 Stationary hoists fixed to, or mounted in or on, another product;
—    12 36 18 Stationary free-standing hoists;
—    12 36 21 Body-support units for hoists.
This document covers different types of mobile and stationary hoists. Some of the requirements and test methods are general and others are only valid for specific product types.
Annexes A, B and C provide general recommendations.
This document does not apply to devices that transport persons between two levels (floors) of a building.
It does not include methods for the determination of ageing or corrosion of such hoists and units.
It does not include methods to qualify individual units prior to use.
The requirements of this document are formulated with regard to the needs of both the persons being hoisted and the attendant using the hoist.
[1] Under preparation. Stage at the time of publication: ISO/FDIS 9999:2021.

  • Standard
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11199-2:2021(Main)
Assistive products for walking manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:2021)
SIST EN ISO 11199-2:2021

This document specifies requirements and test methods of rollators being used as assistive products for walking with wheels, manipulated by both arms, without accessories, unless specified in the particular test procedure. This document also gives requirements relating to safety, ergonomics, performance and information supplied by the manufacturer including marking and labelling.
The requirements and tests are based on every-day use of rollators as assistive products for walking for a maximum user mass as specified by the manufacturer. This document includes rollators specified for a user mass of no less than 35 kg.
This document is not applicable to rollators with horizontal forearm supports, classified as walking tables, for which ISO 11199-3 is applicable.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11199-1:2021(Main)
Assistive products for walking manipulated by both arms - Requirements and test methods - Part 1: Walking frames (ISO 11199-1:2021)
SIST EN ISO 11199-1:2021

This document specifies requirements and test methods for walking frames used as assistive products for walking, manipulated by both arms, without accessories, unless specified in the particular test procedure. This document also gives requirements relating to safety, ergonomics, performance and information supplied by the manufacturer, including marking and labelling.
The requirements and tests are based on everyday use of walking frames as assistive products for walking for a maximum user mass as specified by the manufacturer. This document includes walking frames specified for a user mass of no less than 35 kg.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22675:2016(Main)
Prosthetics - Testing of ankle-foot devices and foot units - Requirements and test methods (ISO 22675:2016)
SIST EN ISO 22675:2016

IMPORTANT ? ISO 22675:2016 is suitable for the assessment of the conformity of prosthetic ankle-foot devices and foot units with the strength requirements specified in 4.4 of ISO 22523:2006 (see NOTE 1). Prosthetic ankle-foot devices and foot units on the market, which have demonstrated their compliance with the strength requirements specified in 4.4 of ISO 22523:2006 through submission to the relevant tests of ISO 10328:2006, need not be retested to this International Standard.
WARNING ? ISO 22675:2016 is not suitable to serve as a guide for the selection of a specific ankle-foot device or foot unit in the prescription of an individual lower limb prosthesis! Any disregard of this warning can result in a safety risk for amputees.
ISO 22675:2016 primarily specifies a cyclic test procedure for ankle-foot devices and foot units of external lower limb prostheses, distinguished by the potential to realistically simulate those loading conditions of the complete stance phase of walking from heel strike to toe-off that are relevant to the verification of performance requirements such as strength, durability and service life.
This potential is of particular importance for the assessment of the performance of a variety of recent designs of ankle-foot devices and foot units with specific characteristics that will only develop under realistic conditions of loading.
In addition, ISO 22675:2016 specifies a static test procedure for prosthetic ankle-foot devices and foot units, consisting of a static proof test and a static ultimate strength test, distinguished, besides other features, (see NOTE 2) by the potential to generate heel and forefoot forces at lines of action conforming to those occurring at the instants of maximum heel and forefoot loading during the cyclic test.
The loading conditions addressed in the third paragraph are characterized by a loading profile determined by the resultant vector of the vertical and horizontal (A-P) ground reaction forces and by a locomotion profile determined by the tibia angle.
The test loading conditions specified in this International Standard are characterized by standardized formats of these loading and locomotion profiles, to be uniformly applied by the cyclic and static test procedures to each sample of ankle-foot device or foot unit submitted for test.

  • Standard
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10328:2016(Main)
Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods (ISO 10328:2016)
SIST EN ISO 10328:2016

IMPORTANT - ISO 10328:2016 is suitable for the assessment of the conformity of lower limb prosthetic devices/structures with the strength requirements specified in 4.4 of ISO 22523:2006 (see NOTE 1). Prosthetic ankle-foot devices and foot units on the market, which have demonstrated their compliance with the strength requirements specified in 4.4 of ISO 22523:2006 through submission to the relevant tests of ISO 10328:2006, need not be retested to ISO 22675:2016.
WARNING - ISO 10328:2016 is not suitable to serve as a guide for the selection of a specific lower limb prosthetic device/structure in the prescription of an individual lower limb prosthesis! Any disregard of this warning can result in a safety risk for amputees.
ISO 10328:2016 specifies procedures for static and cyclic strength tests on lower-limb prostheses (see NOTE 2) which typically produce compound loadings by the application of a single test force. The compound loads in the test sample relate to the peak values of the components of loading which normally occur at different instants during the stance phase of walking.

  • Standard
    153 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 24415-1:2009(Main)
Tips for assistive products for walking - Requirements and test methods - Part 1: Friction of tips (ISO 24415-1:2009)
SIST EN ISO 24415-1:2009

ISO 24415-1:2009 specifies requirements and test methods for the friction between the tips for assistive products for walking and the walking surface. The requirements and test method are based on a usage of tips for ordinary gait on the dry and flat walking surface.
ISO 24415-1:2009 is not applicable to tips manufactured for special purposes.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11334-1:2007(Main)
Assistive products for walking manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches (ISO 11334-1:2007)
SIST EN ISO 11334-1:2007

ISO 11334-1:2007 specifies requirements and test methods for elbow crutches fully equipped with handgrip and tip. The methods specify testing of separation, static load capacity, fatigue and resistance to low temperature embrittlement.
ISO 11334-1:2007 also gives the requirements relating to safety, ergonomics, performance, and information to be supplied by the manufacturer, including marking and labelling.
The requirements and tests are based on every-day usage of elbow crutches when performing the through-swing gait, for a maximum user mass as specified by the manufacturer. ISO 11334-1:2007 is applicable to elbow crutches specified for a user mass of not less than 35 kg.
Requirements and test methods for friction of rubber tips against the walking surface are dealt with separately.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11199-3:2005(Main)
Walking aids manipulated by both arms - Requirements and test methods - Part 3: Walking tables (ISO 11199-3:2005)
SIST EN ISO 11199-3:2005

ISO 11199-3:2005 specifies requirements and methods of testing the static stability, braking capabilities, static strength and fatigue of walking tables without accessory equipment, unless specified in the particular test procedure. It also gives requirements relating to safety, ergonomics and performance, marking, labelling and information supplied by the manufacturer.
ISO 11199-3:2005 includes all walking tables with three or more wheels or tips against the walking surface and having arm supports in the shape of a horizontal supporting table or two horizontal forearm supports.
The requirements and tests are based on everyday usage of walking tables as walking aids, for a maximum user mass as specified by the manufacturer.
ISO 11199-3:2005 includes walking tables specified for a user mass of not less than 35 kg.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day