iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12654-3:1998

(Main)

Textile glass - Yarns - Part 3: General requirements for general applications

Textile glass - Yarns - Part 3: General requirements for general applications

This European Standard provides the requirements for textile glass yarns intended to general purpose applications.

Textilglas - Garne - Teil 3: Allgemeine Anforderungen für allgemeine Anwendungen

Dieser Europäische Norm gibt die Anforderungen an Garne aus Textilglas für allgemeine Anwendungen an.

Verre textile - Fils - Partie 3: Exigences générales pour applications générales

Cette présente norme européenne établit les exigences requises pour les fils de verre textile destinés à des applications générales.

Steklene tkanine - Preje - 3. del: Splošne zahteve za splošno uporabo

General Information

Status
Published
Publication Date
17-Nov-1998
ICS
59.100.10 - Textile glass materials
Technical Committee
CEN/TC 249 - Plastics
Drafting Committee
CEN/TC 249 - Plastics
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
03-Dec-2022
Ref Project
SIST EN 12654-3:2000 - Textile glass - Yarns - Part 3: General requirements for general applications

Relations

Parent
EN 12654-1:1998 - Textile glass - Yarns - Part 1: Designation
Effective Date
22-Dec-2008

Buy Standard

EN 12654-3:2000EN 12654-3:2000
PreviousNext
Standard
EN 12654-3:2000
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steklene tkanine - Preje - 3. del: Splošne zahteve za splošno uporaboTextilglas - Garne - Teil 3: Allgemeine Anforderungen für allgemeine AnwendungenVerre textile - Fils - Partie 3: Exigences générales pour applications généralesTextile glass - Yarns - Part 3: General requirements for general applications59.100.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 2078:2022(Main)
Textile glass - Yarns - Designation (ISO 2078:2022)
SIST EN ISO 2078:2022

This document specifies a system of designating textile glass yarns (including single, multiple-wound, folded (plied), cabled and textured yarns, strands, slivers and rovings) based on their linear density expressed in the tex system.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9163:2005(Main)
Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005)
SIST EN ISO 9163:2005

ISO 9163:2005 specifies two methods for the determination of the tensile stress at break of an impregnated roving:
a reference method using test specimens produced with moulded epoxy tabs;a short method using test specimens with no tabs or simple cardboard or composite tabs.
The methods are applicable to both assembled (multistrand) and direct (multifilament) rovings; nevertheless the reference method may be used for various linear densities, but the short method is described for 1200 tex rovings only, which is the linear density that allows the roving to spread out most easily to give a flat tape.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14118-1:2003(Main)
Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation
SIST EN 14118-1:2003

1.1   This part 1 of EN 14118 establishes a method of designation for chopped strand and continuous filament mats made from textile glass strands, which may be used as the basis for specifications.
1.2   This designation system is for chopped strand an continuous filament mats used for the reinforcement of plastics and hydraulic matrices.
It does not apply to mats made from staple fibres, nor to mechanical or stitched bonded materials and to veils.
1.3   It is not intended to imply that mats having the same designation give necessarily the same performance. Nor is the designation system intended to cover all the characteristics of mats. This part 1 of EN 14118 does not give engineering data, performance data or data which may be required to specify chopped strand and continuous filament mats for a particular application or method of processing.
If such additional properties are required they shall be determined in accordance with the test methods specified in EN 14118-2.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14118-3:2003(Main)
Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements
SIST EN 14118-3:2003

This part 3 of EN 14118 provides the technical specification for chopped strands and continuous filaments mats covered by the part 1.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14118-2:2003(Main)
Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements
SIST EN 14118-2:2003

This part 2 of EN 14118 provides the list of test methods and general requirements for chopped strand and continuous filament mats covered by the part 1.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14020-2:2002(Main)
Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements
SIST EN 14020-2:2003

This part of this European Standard defines test methods to be used to determine designated and specified properties given in Part 1 and 3, respectively. It defines general requirements applicable to the specification of all types of glass fibre rovings falling within the scope of this specification as defined in Part 1 of the standard.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14020-1:2002(Main)
Reinforcements - Specification for textile glass rovings - Part 1: Designation
SIST EN 14020-1:2003

This part of this European Standard establishes a method of designation for roving made from continuous filament textile glass strands, which may be used as the basis for specifications.
This designation system is for roving used for the reinforcement of plastics and hydraulic matrices, and the manufacture of woven materials.
It does not apply to roving made from staple fibres.
It is not intended to imply that roving having the same designation give necessarily the same performance. Nor is the designation system intended to cover all the characteristics of roving. This part of this European Standard  does not give engineering data, performance data or data which may be required to specify roving for a particular application or method of processing.
If such additional properties are required they shall be determined in accordance with the test methods specified in Part 2 of EN 14020.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14020-3:2002(Main)
Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements
SIST EN 14020-3:2003

This part of this European Standard gives a technical specification for rovings that are made from continuous filament textile glass. It defines those parameters which shall be specified plus other parameters which may be specified if required for a particular application or processing method.
The specification does not define absolute or nominal values for any parameter. The value of a specified parameter is to be defined by the manufacturer but this specification defines the method of test to be used to determine the value of each specified parameter and the tolerance about which the parameter shall be controlled by the manufacturer.
The parameters which shall always be defined in any roving specification are defined in clause 4.1 and 4.2. The other parameters which are included in a specification shall either be nominated by the manufacturer or agreed between manufacturer and customer. These parameters are defined in clause 4.3.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12971-2:1999(Main)
Reinforcements - Specification for textile glass chopped strands - Part 2: Test methods and general requirements
SIST EN 12971-2:2000

1.1 This part 2 of EN 12971 defines the test methods to be used to determine the designated and specified properties given in part 1 and 3 respectively. 1.2 This part 2 of EN 12971 defines the general requirements applicable to the specification of all types of chopped strand falling within the scope of this specification as defined in part 1 of the standard.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12971-1:1999(Main)
Reinforcements - Specification for textile glass chopped strands - Part 1: Designation
SIST EN 12971-1:2000

1.1 This part 1 of EN 12971 establishes a method of designation for chopped strands made from continuous filament textile glass strands, which may be used as the basis for specifications. 1.2 This designation system is for chopped strands used for the reinforcement of plastics and the manufacture of synthetic bonded non-woven materials. It does not apply to chopped strands made from staple fibres.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day