EN 10163-2:1991
(Main)Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
This part 2 in addition to part 1 specifies the delivery requirements which apply to the surface quality of host-rolled plates and wide flats with thicknesses of 3 mm ¿ e ¿ 250 mm. NOTE: For plate with a thickness > 250 mm special agreements should be made at the time of enquiry and order.
Lieferbedingungen für die Oberflächenbeschaffenheit von warmgewalzten Stahlerzeugnissen (Blech, Breitflachstahl und Profile) - Teil 2: Blech und Breitflachstahl
Dieser Teil 2 enthält in Verbindung mit Teil 1 die Lieferbedingungen für die Oberfalächenbeschaffenheit von warmgewalztem Blech und Breitflachsthahl in Dicken von 3 mm <= e <= 250 mm.
Conditions de livraison relatives à l'état de surface des tôles, larges plats et profilés en acier laminés à chaud - Partie 2: Tôles et larges plats
La présente deuxième partie complète la première partie en indiquant les prescriptions de qualité de surface des tôles et larges plats d'épaisseur comprise entre 3 mm <= e <= 250 mm inclus.
Dobavni pogoji za videz površine vroče valjane pločevine, ploščatega jekla in profilov - 2. del: Pločevine in ploščato jeklo
General Information
- Status
- Withdrawn
- Publication Date
- 20-Aug-1991
- Withdrawal Date
- 07-Dec-2004
- Technical Committee
- ECISS/TC 103 - Structural steels other than reinforcements
- Drafting Committee
- ECISS/TC 10 - Structural steels - Qualities
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 08-Dec-2004
- Completion Date
- 08-Dec-2004
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10163-2:1991 is a standard published by the European Committee for Standardization (CEN). Its full title is "Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections - Part 2: Plate and wide flats". This standard covers: This part 2 in addition to part 1 specifies the delivery requirements which apply to the surface quality of host-rolled plates and wide flats with thicknesses of 3 mm ¿ e ¿ 250 mm. NOTE: For plate with a thickness > 250 mm special agreements should be made at the time of enquiry and order.
This part 2 in addition to part 1 specifies the delivery requirements which apply to the surface quality of host-rolled plates and wide flats with thicknesses of 3 mm ¿ e ¿ 250 mm. NOTE: For plate with a thickness > 250 mm special agreements should be made at the time of enquiry and order.
EN 10163-2:1991 is classified under the following ICS (International Classification for Standards) categories: 77.140.50 - Flat steel products and semi-products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10163-2:1991 has the following relationships with other standards: It is inter standard links to EN 10163-2:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10163-2:1991 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071, M/BC/CEN/87/15. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10163-2:1991 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lieferbedingungen für die Oberflächenbeschaffenheit von warmgewalzten Stahlerzeugnissen (Blech, Breitflachstahl und Profile) - Teil 2: Blech und BreitflachstahlConditions de livraison relatives a l'état de surface des tôles, larges plats et profilés en acier laminés a chaud - Partie 2: Tôles et larges platsDelivery requirements for surface condition of hot rolled steel plates, wide
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...