FprEN 13631-17

SLOVENSKI STANDARD
01-april-2021
Eksplozivi za civilno uporabo - Smodniki in raketna goriva - 7. del: Ugotavljanje
lastnosti črnega smodnika
Explosives for civil uses - Propellants and rocket propellants - Part 7: Determination of
properties of black powder
Explosivstoffe für zivile Zwecke - Treibladungspulver und Raketentreibstoffe - Teil 7:
Bestimmung der Eigenschaften von Schwarzpulver
Explosifs à usage civil - Poudre propulsive et propergol pour fusée - Partie 7:
Détermination des propriétés de la poudre noire
Ta slovenski standard je istoveten z: prEN 13938-7
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
prEN 13938-7
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 71.100.30 Will supersede EN 13938-7:2004
English Version
Explosives for civil uses - Propellants and rocket
propellants - Part 7: Determination of safe and reliable
ignition and complete deflagration of black powder
Explosifs à usage civil - Poudre propulsive et propergol Explosivstoffe für zivile Zwecke - Treibladungspulver
pour fusées - Partie 7: Détermination d'un allumage und Raketentreibstoffe - Teil 7: Bestimmung der
sûr et fiable et d'une déflagration complète de la sicheren und zuverlässigen Anzündung und
poudre noire vollständigen Deflagration von Schwarzpulver
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 321.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13938-7:2021 E
worldwide for CEN national Members.

prEN 13631-7:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 4
6 Preparation . 4
6.1 Test samples . 4
6.2 Means of ignition . 4
6.3 Preparation of test samples . 5
7 Procedure . 5
8 Test report . 6
Annex ZA (informative) Relationship between this European Standard and the essential
safety requirements of Directive 2014/28/EU relating to the making available on
the market and supervision of explosives for civil uses aimed to be covered . 7
Bibliography . 8

prEN 13631-7:2021 (E)
European foreword
This document (prEN 13938-7:2021) has been prepared by Technical Committee CEN/TC 321
“Explosives for civil uses”, the secretariat of which is held by UNE.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13938-7:2004.
In comparison with the previous edition, the following technical modifications have been made:
a) requirements regarding black powders have been reorganized and have been removed from the
document since they are now addressed in prEN 13631-1:2021;
b) the normative references have been updated;
c) Clause 4, Principle, has been added;
d) technical revision for clarification purposes;
e) Annex A, Range of applicability of test methods, has been removed;
f) Annex ZA has been updated.
This document has been prepared under a Standardization Request (M/562) annexed to the
Commission Implementing Decision C(2019)6634 final as regards Explosives for civil uses given to CEN
by the European Commission and the European Free Trade Association, and supports Essential Safety
requirements of Directive 2014/28/EU.
For relationship with Directive 2014/28/EU, see informative Annex ZA, which is an integral part of
...