Textiles - Quantitative chemical analysis - Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone) (ISO 1833-13:2006)

ISO 1833-13:2006 specifies a method, using carbon disulfide/acetone, to determine the percentage of chlorofibre, after removal of non-fibrous matter, in textiles made of mixtures of certain chlorofibres, whether after-chlorinated or not, and wool, animal hair, silk, cotton, viscose, cupro, modal, polyamide, polyester, acrylic and glass fibres.
When the wool or silk content of a mixture exceeds 25 %, the method described in ISO 1833-4 should be used.
When the polyamide content of a mixture exceeds 25 %, the method described in ISO 1833-7 should be used.

Textilien - Quantitative chemische Analysen - Teil 13: Mischungen aus bestimmten Chlorfasern und bestimmten anderen Fasern (Schwefelkohlenstoff-/Aceton-Verfahren) (ISO 1833-13:2006)

Dieser Teil von ISO 1833 legt ein Schwefelkohlenstoff /Aceton Verfahren zur Bestimmung des prozentualen Anteils an Chlorfasern, nach dem Abtrennen der nichtfaserigen Begleitstoffe, in Textilien aus binären Faser-mischungen aus
-   bestimmten Chlorfasern, unabhängig davon, ob sie nachchloriert sind oder nicht
und
-   Wolle, Tierhaar, Seide, Baumwolle, Viskose, Cupro, Modal, Polyamid, Polyester, Polyacryl und Glas-fasern
fest.
Wenn der Woll  oder Seidegehalt einer Mischung mehr als 25 % beträgt, sollte das in ISO 1833 4 beschriebene Verfahren angewendet werden.
Wenn der Polyamidgehalt einer Mischung mehr als 25 % beträgt, sollte das in ISO 1833 7 beschriebene Verfahren angewendet werden.

Textiles - Analyse chimique quantitative - Partie 13: Mélanges de certaines chlorofibres et de certaines autres fibres (méthode au sulfure de carbone/acétone) (ISO 1833-13:2006)

L'ISO 1833-13:2006 spécifie une méthode de détermination, au sulfure de carbone/acétone, du pourcentage de chlorofibres, après élimination des matières non fibreuses, dans les textiles composés de mélanges binaires de certaines chlorofibres, surchlorées ou non, et de laine, poils d'animaux, soie, coton, viscose, cupro, modal, polyamide, polyester, acrylique et fibres de verre.
Lorsque la laine ou la soie contenue dans le mélange excède 25 %, il convient d'utiliser la méthode décrite dans l'ISO 1833-4.
Lorsque le polyamide contenu dans le mélange excède 25 %, il convient d'utiliser la méthode décrite dans l'ISO 1833-7.

Tekstilije - Kvantitativna kemična analiza - 13. del: Mešanica nekaterih klorovlaken in nekaterih drugih vlaken (metoda z uporabo ogljikovega disulfida/acetona) (ISO 1833-13:2006)

Ta del standarda ISO 1833 določa metodo z uporabo ogljikovega disulfida/acetona za ugotavljanje odstotne vrednosti klorovlaken po odstranitvi nevlakenske snovi v tekstilijah iz mešanic - določenih klorovlaken, naknadno kloriranih ali ne, in - volne, živalskih vlaken, svile, bombaža, viskoze, kupro vlaken, modalnih vlaken, poliamidnih, poliestrskih, akrilnih in steklenih vlaken. Kadar delež volne ali svile v mešanici presega 25 odstotkov, je treba uporabiti metodo, opisano v ISO 1833-4. Kadar delež poliamida v mešanici presega 25 odstotkov, je treba uporabiti metodo, opisano v ISO 1833-7.

General Information

Status
Withdrawn
Publication Date
12-Oct-2010
Withdrawal Date
22-Oct-2019
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
23-Oct-2019

Relations

Buy Standard

Standard
EN ISO 1833-13:2013
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2013
7HNVWLOLMH.YDQWLWDWLYQDNHPLþQDDQDOL]DGHO0HãDQLFDQHNDWHULKNORURYODNHQ
LQQHNDWHULKGUXJLKYODNHQ PHWRGD]XSRUDERRJOMLNRYHJDGLVXOILGDDFHWRQD  ,62

Textiles - Quantitative chemical analysis - Part 13: Mixtures of certain chlorofibres and
certain other fibres (method using carbon disulfide/acetone) (ISO 1833-13:2006)
Textilien - Quantitative chemische Analysen - Teil 13: Mischungen aus bestimmten
Chlorfasern und bestimmten anderen Fasern (Schwefelkohlenstoff-/Aceton-Verfahren)
(ISO 1833-13:2006)
Textiles - Analyse chimique quantitative - Partie 13: Mélanges de certaines chlorofibres
et de certaines autres fibres (méthode au sulfure de carbone/acétone) (ISO 1833-
13:2006)
Ta slovenski standard je istoveten z: EN ISO 1833-13:2010
ICS:
59.060.20 Umetna vlakna Man-made fibres
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 1833-13
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2010
ICS 59.060.20
English Version
Textiles - Quantitative chemical analysis - Part 13: Mixtures of
certain chlorofibres and certain other fibres (method using
carbon disulfide/acetone) (ISO 1833-13:2006)
Textiles - Analyse chimique quantitative - Partie 13: Textilien - Quantitative chemische Analysen - Teil 13:
Mélanges de certaines chlorofibres et de certaines autres Mischungen aus bestimmten Chlorfasern und bestimmten
fibres (méthode au sulfure de carbone/acétone) (ISO 1833- anderen Fasern (Schwefelkohlenstoff-/Aceton-Verfahren)
13:2006) (ISO 1833-13:2006)
This European Standard was approved by CEN on 12 September 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1833-13:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO 1833-13:2006 has been prepared by Technical Committee ISO/TC 38 “Textiles” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 1833-13:2010 by
Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the
latest by April 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 1833-13:2006 has been approved by CEN as EN ISO 1833-13:2010 without any modification.

INTERNATIONAL ISO
STANDARD 1833-13
First edition
2006-06-01
Textiles — Quantitative chemical
analysis —
Part 13:
Mixtures of certain chlorofibres and
certain other fibres (method using carbon
disulfide/acetone)
Textiles — Analyse chimique quantitative —
Partie 13: Mélanges de certaines chlorofibres et de certaines autres
fibres (méthode au sulfure de carbone/acétone)

Reference number
ISO 1833-13:2006(E)
©
ISO 2006
ISO 1833-13:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved

ISO 1833-13:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.