EN 1301-2:1997
(Main)Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties
Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties
This Part of prEN 1301 specifies the mechanical properties of aluminium and aluminium alloy drawn wire of general engineering applications including rivet manufacture (except aeronautical rivets). It applies to drawn wires, exept for electrical or welding purposes. It does not apply to drawing stock. The designation of aluminium and aluminium alloys and the temper designations used in this standard are in accordance with EN 573-3 and EN 515 respectively.
Aluminium und Aluminiumlegierungen - Gezogene Drähte - Teil 2: Mechanische Eigenschaften
Dieser Teil von prEN 1301 legt die mechanischen Eigenschaften für gezogene Drähte aus Aluminium und Aluminiumlegierungen für allgemeine Anwendungen einschließlich der Nietherstellung (ausgenommen sind die Nieten für die Luftfahrttechnik) fest. Er gilt gezogene Drähte, ausgenommen Draht für elektrotechnische oder schweißtechnische Anwendungen. Er gilt nicht für Vordraht. Die in dieser Norm verwendeten Bezeichnungen von Aluminium und Aluminiumlegierungen, die chemische Zusammensetzung und die Bezeichnungen der Werkstoffzustände stimmen mit EN 573-3 und EN 515 überein.
Aluminium et alliages d'aluminium - Fil étiré - Partie 2: Caractéristiques mécaniques
La présente partie de l'EN 1301 spécifie les caractéristiques mécaniques du fil tréfilé en aluminium ou en alliages d'aluminium corroyés destinés à des applications mécaniques incluant la fabrication des rivets (à l'exception des rivets en aéronautique). Elle ne s'applique qu'au fil tréfilé à froid; elle ne couvre pas le fil machine ou le fil tréfilé utilisé en électricité ou en soudage. Les désignation des différents alliages leurs compositions chimiques ainsi que les états métallurgiques utilisés dans cette partie de norme sont en accord avec les normes EN 573-3 d'une part et EN 515 d'autre part.
Aluminij in aluminijeve zlitine - Vlečena žica - 2. del: Mehanske lastnosti
General Information
- Status
- Withdrawn
- Publication Date
- 22-Jul-1997
- Withdrawal Date
- 16-Sep-2008
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 4 - Wires and drawing stock
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 17-Sep-2008
- Completion Date
- 17-Sep-2008
Relations
- Replaced By
EN 1301-2:2008 - Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties - Effective Date
- 22-Dec-2008
- Corrected By
EN 1301-2:1997/AC:1998 - Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties - Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 1301-2:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties". This standard covers: This Part of prEN 1301 specifies the mechanical properties of aluminium and aluminium alloy drawn wire of general engineering applications including rivet manufacture (except aeronautical rivets). It applies to drawn wires, exept for electrical or welding purposes. It does not apply to drawing stock. The designation of aluminium and aluminium alloys and the temper designations used in this standard are in accordance with EN 573-3 and EN 515 respectively.
This Part of prEN 1301 specifies the mechanical properties of aluminium and aluminium alloy drawn wire of general engineering applications including rivet manufacture (except aeronautical rivets). It applies to drawn wires, exept for electrical or welding purposes. It does not apply to drawing stock. The designation of aluminium and aluminium alloys and the temper designations used in this standard are in accordance with EN 573-3 and EN 515 respectively.
EN 1301-2:1997 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1301-2:1997 has the following relationships with other standards: It is inter standard links to EN 1301-2:2008, EN 1301-2:1997/AC:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1301-2:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1998
$OXPLQLMLQDOXPLQLMHYH]OLWLQH9OHþHQDåLFDGHO 0HKDQVNHODVWQRVWL
Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties
Aluminium und Aluminiumlegierungen - Gezogene Drähte - Teil 2: Mechanische
Eigenschaften
Aluminium et alliages d'aluminium - Fil ét
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...