EN ISO 10768:2010

SLOVENSKI STANDARD
01-oktober-2010
2EXWHY3UHVNXVQDPHWRGD]DXJRWDYOMDQMHRGSRUQRVWLHODVWLþQLKPDWHULDORY]D
REXWHYSURWLSRQDYOMDMRþHPXUD]WH]DQMX2GSRUQRVWSURWLXWUXMDQMX,62

Footwear - Test method for the determination of the resistance of elastic materials for
footwear to repeated extension - Fatigue resistance (ISO 10768:2010)
Schuhe - Prüfverfahren zur Bestimmung der Beständigkeit von elastischen Materialien
für Schuhe gegen wiederholte Dehnung - Ermüdungsbeständigkeit (ISO 10768:2010)
Chaussures - Méthode d'essai pour la détermination de la résistance des élastiques de
chaussures à des extensions répétées - Résistance à la fatigue (ISO 10768:2010)
Ta slovenski standard je istoveten z: EN ISO 10768:2010
ICS:
61.060 Obuvala Footwear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 10768
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2010
ICS 61.060
English Version
Footwear - Test method for the determination of the resistance
of elastic materials for footwear to repeated extension - Fatigue
resistance (ISO 10768:2010)
Chaussures - Méthode d'essai pour la détermination de la Schuhe - Prüfverfahren zur Bestimmung der Beständigkeit
résistance des élastiques de chaussures à des extensions von elastischen Materialien für Schuhe gegen wiederholte
répétées - Résistance à la fatigue (ISO 10768:2010) Dehnung - Ermüdungsbeständigkeit (ISO 10768:2010)
This European Standard was approved by CEN on 9 June 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10768:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3
Foreword
This document (EN ISO 10768:2010) has been prepared by Technical Committee CEN/TC 309 “Footwear”,
the secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 216 "Footwear".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2011, and conflicting national standards shall be withdrawn at
the latest by January 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
INTERNATIONAL ISO
STANDARD 10768
First edition
2010-07-01
Footwear — Test method for the
determination of the resistance of elastic
materials for footwear to repeated
extension — Fatigue resistance
Chaussures — Méthode d'essai pour la détermination de la résistance
des élastiques de chaussures à des extensions répétées — Résistance
à la fatigue
Reference number
ISO 10768:2010(E)
©
ISO 2010
ISO 10768:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved

ISO 10768:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10768 was prepared by Technical Committee ISO/TC 216, Footwear and by Technical Committee
CEN/TC 309, Footwear in collaboration, in
...