EN 1715-3:1997
(Main)Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding)
Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding)
This part of prEN 1715 applies to drawing stock of aluminium alloys for general mechanical uses (excluding welding) and specifies characteristics and specific technical conditions for inspection and delivery of these products. The general requirements and technical conditions for inspection and delivery are specified in prEN 1715-1. This standard does not apply to drawn wire. In the case of more demanding uses in terms of surface aspects, ductility, the final use shall be indicated and special requirements shall be agreed between the producer and purchaser.
Aluminium und Aluminiumlegierungen - Vordraht - Teil 3: Besondere Anforderungen für mechanische Anwendungen (ausgenommen Schweißen)
Dieser Teil von prEN 1715 gilt für Vordraht aus Aluminium und Aluminiumlegierungen für mechanische Anwendungen (ausgenommen Schweißen) und legt die Eigenschaften sowie die besonderen technischen Lieferbedingungen für diese Erzeugnisse fest. Die allgemeinen Anforderungen und technischen Lieferbedingungen sind in prEN 1715-1 festgelegt. Diese Norm gilt nicht für gezogenen Draht. Bei besonderen Anwendungen, die spezielle Anforderungen an die Oberflächenbeschaffenheit, die Plastizität u.ä. stellen, muß der Endverwendungszweck angegeben werden, usw.
Aluminium et alliages d'aluminium - Fil machine - Partie 3: Exigences spécifiques pour les applications mécaniques (soudage excepté)
Cette partie de la norme prEN 1715 s'applique au fil machine en aluminium et alliages d'aluminium à usages mécaniques (sauf le soudage) et définit les caractéristiques particulières et les conditions techniques de contrôle et de livraison spécifiques à ces produits. Les caractéristiques et conditions techniques générales sont spécifiées dans la norme prEN 1715-1. Cette norme ne s'applique pas au fil étiré. En cas d'applications particulières conduisant à des exigences plus contraignantes de surface, ductilité, etc. l'usage final doit être précisé ...
Aluminij in aluminijeve zlitine - Vlečeni polizdelki - 3. del: Posebne zahteve za uporabo v mehanske namene (razen varjenja)
General Information
- Status
- Withdrawn
- Publication Date
- 16-Sep-1997
- Withdrawal Date
- 15-Apr-2008
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 4 - Wires and drawing stock
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 16-Apr-2008
- Completion Date
- 16-Apr-2008
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 1715-3:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding)". This standard covers: This part of prEN 1715 applies to drawing stock of aluminium alloys for general mechanical uses (excluding welding) and specifies characteristics and specific technical conditions for inspection and delivery of these products. The general requirements and technical conditions for inspection and delivery are specified in prEN 1715-1. This standard does not apply to drawn wire. In the case of more demanding uses in terms of surface aspects, ductility, the final use shall be indicated and special requirements shall be agreed between the producer and purchaser.
This part of prEN 1715 applies to drawing stock of aluminium alloys for general mechanical uses (excluding welding) and specifies characteristics and specific technical conditions for inspection and delivery of these products. The general requirements and technical conditions for inspection and delivery are specified in prEN 1715-1. This standard does not apply to drawn wire. In the case of more demanding uses in terms of surface aspects, ductility, the final use shall be indicated and special requirements shall be agreed between the producer and purchaser.
EN 1715-3:1997 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1715-3:1997 has the following relationships with other standards: It is inter standard links to EN 1715-3:2008, EN 1715-3:1997/AC:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1715-3:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2002
$OXPLQLMLQDOXPLQLMHYH]OLWLQH9OHþHQLSROL]GHONLGHO 3RVHEQH]DKWHYH]D
XSRUDERYPHKDQVNHQDPHQH UD]HQYDUMHQMD
Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for
mechanical uses (excluding welding)
Aluminium und Aluminiumlegierungen - Vordraht - Teil 3: Besondere Anforderungen für
mechanische Anwendungen (ausgenommen Schweiße
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...