EN ISO 17707:2005
(Main)Footwear - Test methods for outsoles - Flex resistance (ISO 17707:2005)
Footwear - Test methods for outsoles - Flex resistance (ISO 17707:2005)
ISO 17707:2005 specifies a method for determining the flex resistance of outsoles. This method is intended to assess the effect of sole materials and surface patterns on cut growth. This method is applied to outsoles that have a maximum longitudinal rigidity of 30 N.
Schuhe - Prüfverfahren für Laufsohlen - Biegeverhalten (ISO 17707:2005)
Dieser Normentwurf legt ein Verfahren für die Bestimmung des Biegeverhaltens von Laufsohlen fest. Mit diesem Verfahren wird beabsichtigt, die Auswirkung von Sohlenwerkstoffen und Oberflächenmustern auf das Weiterreißen eines Schnittes zu bewerten. Das Verfahren gilt für Laufsohlen, die in Übereinstimmung mit den in Anhang A genannten Prüfungen eine maximale Längssteifigkeit von 30 N haben.
Chaussures - Méthodes d'essai applicables aux semelles d'usure - Résistance à la flexion (ISO 17707:2005)
L'ISO 17707:2005 prescrit une méthode de détermination de la résistance à la flexion des semelles d'usure. Cette méthode vise à évaluer l'influence des matériaux constitutifs de la semelle ainsi que celle du relief de la surface sur l'agrandissement d'une entaille. Elle s'applique aux semelles d'usure qui, conformément à l'essai mentionné dans l'Article 6 ont une rigidité longitudinale maximale de 30 N.
Footwear - Test methods for outsoles - Flex resistance (ISO 17707:2005)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2005
Footwear - Test methods for outsoles - Flex resistance (ISO 17707:2005)
Footwear - Test methods for outsoles - Flex resistance (ISO 17707:2005)
Schuhe - Prüfverfahren für Laufsohlen - Biegeverhalten (ISO 17707:2005)
Chaussures - Méthodes d'essai applicables aux semelles d'usure - Résistance a la
flexion (ISO 17707:2005)
Ta slovenski standard je istoveten z: EN ISO 17707:2005
ICS:
61.060 Obuvala Footwear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 17707
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2005
ICS 61.060
English version
Footwear - Test methods for outsoles - Flex resistance (ISO
17707:2005)
Chaussures - Méthodes d'essai applicables aux semelles Schuhe - Prüfverfahren für Laufsohlen - Biegeverhalten
d'usure - Résistance à la flexion (ISO 17707:2005) (ISO 17707:2005)
This European Standard was approved by CEN on 2 March 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17707:2005: E
worldwide for CEN national Members.
Contents page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Apparatus and material .4
5 Sampling and conditioning .7
6 Rigidity test method.8
6.1 Preparation of the test pieces .8
6.2 Test procedure .9
6.3 Selection criteria .9
7 Flex resistance test method.10
8 Test report .10
Bibliography.11
Foreword
This European Standard (EN ISO 17707:2005) has been prepared by Technical Committee CEN /TC 309
"Footwear", the secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 216
"Footwear".
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by January 2006, and conflicting national standards shall be withdrawn at the latest
by January 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
1 Scope
This European Standard specifies a method for determining the flex resistance of outsoles. This method is intended
to assess the effect of sole materials and surface patterns on cut growth. This method is applied to outsoles that, in
accordance with the test mentioned in Clause 6, have a maximum longitudinal rigidity of 30 N.
NOTE The method described in this standard is based on the method for the determination of the flex resistance for
outsoles described in EN ISO 20344.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references,
only the edition cited applies. For undated references, the latest edition of the referenced document (including any
amendments) applies.
EN 12222, Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear.
EN ISO 534, Paper and board - Determination of thickness, density and specific volume (ISO 534:2005)
3 Terms and definitions
For the purposes of this European Standard, the following term and definition apply.
flex resistance
number of flexes that cause cut growth and/or initiation of cracks in the outsoles
4 Apparatus and material
4.1 The following apparatus shall be used:
4.2 Device for the measurement of the longitudinal rigidity of outsoles (See Figure 1)
4.2.1 Smooth metal hinged plate, fixed to a rigid base with provision to reduce the
...
SLOVENSKI STANDARD
01-november-2005
Footwear - Test methods for outsoles - Flex resistance (ISO 17707:2005)
Footwear - Test methods for outsoles - Flex resistance (ISO 17707:2005)
Schuhe - Prüfverfahren für Laufsohlen - Biegeverhalten (ISO 17707:2005)
Chaussures - Méthodes d'essai applicables aux semelles d'usure - Résistance a la
flexion (ISO 17707:2005)
Ta slovenski standard je istoveten z: EN ISO 17707:2005
ICS:
61.060 Obuvala Footwear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 17707
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2005
ICS 61.060
English version
Footwear - Test methods for outsoles - Flex resistance (ISO
17707:2005)
Chaussures - Méthodes d'essai applicables aux semelles Schuhe - Prüfverfahren für Laufsohlen - Biegeverhalten
d'usure - Résistance à la flexion (ISO 17707:2005) (ISO 17707:2005)
This European Standard was approved by CEN on 2 March 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17707:2005: E
worldwide for CEN national Members.
Contents page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Apparatus and material .4
5 Sampling and conditioning .7
6 Rigidity test method.8
6.1 Preparation of the test pieces .8
6.2 Test procedure .9
6.3 Selection criteria .9
7 Flex resistance test method.10
8 Test report .10
Bibliography.11
Foreword
This European Standard (EN ISO 17707:2005) has been prepared by Technical Committee CEN /TC 309
"Footwear", the secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 216
"Footwear".
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by January 2006, and conflicting national standards shall be withdrawn at the latest
by January 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
1 Scope
This European Standard specifies a method for determining the flex resistance of outsoles. This method is intended
to assess the effect of sole materials and surface patterns on cut growth. This method is applied to outsoles that, in
accordance with the test mentioned in Clause 6, have a maximum longitudinal rigidity of 30 N.
NOTE The method described in this standard is based on the method for the determination of the flex resistance for
outsoles described in EN ISO 20344.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references,
only the edition cited applies. For undated references, the latest edition of the referenced document (including any
amendments) applies.
EN 12222, Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear.
EN ISO 534, Paper and board - Determination of thickness, density and specific volume (ISO 534:2005)
3 Terms and definitions
For the purposes of this European Standard, the following term and definition apply.
flex resistance
number of flexes that cause cut growth and/or initiation of cracks in the outsoles
4 Apparatus and material
4.1 The following apparatus shall be used:
4.2 Device for the measurement of the longitudinal rigidity of outsoles (See Figure 1)
4.2.1 Smooth metal hinged plate, fixed to a rigid base with provision to reduce
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.