EN 16839:2022/prA1
(Amendment)Railway applications - Rolling stock - Head stock layout
Railway applications - Rolling stock - Head stock layout
This document is applicable to vehicles equipped with buffers and screw coupling systems.
In order to allow operation and coupling of trainsets or vehicles, this document specifies the
defined free space for the shunter called the "Berne rectangle" and the necessary free space for
the installation of the rescue coupler.
This document specifies the location, fixing and free spaces on the headstock of:
- buffers;
- screw coupling systems;
- end cocks;
- pneumatic half couplings;
- connections for electric cables.
It also specifies the calculation of the width of the buffer heads.
Unless otherwise displayed, all dimensions given in this document are nominal values.
Bahnanwendungen - Schienenfahrzeuge - Anordnung der Bauteile am Kopfstück
Applications ferroviaires - Matériel roulant ferroviaires - Agencement de la traverse de tête
Železniške naprave - Vozna sredstva - Postavitev glavnega parka
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2024
Železniške naprave - Vozna sredstva - Postavitev glavnega parka
Railway applications - Rolling stock - Head stock layout
Bahnanwendungen - Schienenfahrzeuge - Anordnung der Bauteile am Kopfstück
Applications ferroviaires - Matériel roulant ferroviaires - Agencement de la traverse de
tête
Ta slovenski standard je istoveten z: EN 16839:2022/prA1
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
EN 16839:2022
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
March 2024
ICS
English Version
Railway applications - Rolling stock - Head stock layout
Applications ferroviaires - Matériel roulant ferroviaires Bahnanwendungen - Schienenfahrzeuge - Anordnung
- Agencement de la traverse de tête der Bauteile am Kopfstück
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.
This draft amendment A1, if approved, will modify the European Standard EN 16839:2022. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploit
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.