EN 17383:2024

SLOVENSKI STANDARD
01-julij-2024
Protihrupne ovire za cestni promet - Trajnostnost: Deklariranje ključnih kazalnikov
lastnosti (KPI)
Road traffic noise reducing devices - Sustainability: Key Performance Indicators (KPIs)
Declaration
Lärmschutzvorrichtungen an Straßen - Nachhaltigkeitsbewertung: Deklaration der
Leistungsindikatoren
Dispositifs de réduction du bruit du trafic routier - Évaluation de la contribution au
développement durable : déclaration des indicateurs clés de performance (ICP)
Ta slovenski standard je istoveten z: EN 17383:2024
ICS:
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 17383
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2024
EUROPÄISCHE NORM
ICS 93.080.30
English Version
Road traffic noise reducing devices - Sustainability: Key
Performance Indicators (KPIs) Declaration
Dispositifs de réduction du bruit du trafic routier - Lärmschutzvorrichtungen an Straßen -
Contribution au développement durable : Déclaration Nachhaltigkeitsbewertung: Deklaration der
des indicateurs d'impact environnemental Leistungsindikatoren
This European Standard was approved by CEN on 29 January 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17383:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Determination of the characteristics . 6
4.1 Product definition . 6
4.2 Functional unit, declared unit . 6
4.2.1 General . 6
4.2.2 Declared unit for the RTNRD type noise barrier . 7
4.2.3 Declared unit for the RTNRD type cladding . 7
4.2.4 Declared unit for the RTNRD type cover. 8
4.2.5 Declared unit for the RTNRD added device . 8
4.2.6 Declared unit for the RTNRD acoustic element . 9
4.3 Boundaries in the life cycle . 10
4.3.1 General . 10
4.3.2 Product stage: module A1-A3 . 10
4.3.3 Construction process stage: modules A4-A5 . 11
4.3.4 End of life stage: modules C1-C4 . 12
4.3.5 Benefits and loads beyond the system boundary (Module D) . 12
4.3.6 Data quality related to upstream and downstream processes . 12
4.4 Boundary in time . 13
4.5 Boundary towards nature . 13
4.6 Cut-off rules . 13
4.7 RTNRD Environmental Impact Indicators . 13
5 Report . 13
Bibliography . 14

European foreword
This document (EN 17383:2024) has been prepared by the Technical Committee CEN/TC 226 “Road
equipment”, the secretariat of which is held by AFNOR, it concerns the whole life sustainability of Road Traffic
Noise Reducing Devices (RTNRDs).
This European Standard shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by October 2024, and conflicting national standards shall be withdrawn at the
latest by October 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body. A
complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United Kingdom.
Introduction
When placing a construction product on the European market the manufacturer may be expected to present a
Declaration of Performance (DoP) with reference to the Basic Work Requirements (BWRs) as listed in the CPR
(Construction Product Regulation EU 305/2011).
The performance declared with reference to BWR 7 (Sustainable Use of Natural Resources) corresponds to the
Environmental Product Declaration (EPD) as referred to in EN 15804:2012+A2:2019/AC:2021 which provides
core rules for all construction products and services.
This document provides specific rules for Environmental Product Declarations (EPD) specifically for Road
Traffic Noise Reducing Devices (RTNRD).
It is intended as a supporting standard for the manufacturer to declare the performance of RTNRD in the context
of the assessment of the sustainability of civil engineering works as in EN 17472:2021: Sustainability of
construction works — Sustainability assessment of civil engineering works — Calculation methods.
This document presents Environmental Impact Indicators the RTNRD manufacturers will provide to declare the
performance of RTNRD with reference to BWR7 and to allow better understanding on how their product can be
considered “sustainable”.
Considerations for materials (e.g. steel coils, panels of mineral wools, acryl transparent sheet, .) if not related to
the intended use (RTNRD) are not covered by this document.
This document is also intended to help manufacturers to identify the materials and product stages with the most
important impact on different sustainability aspects.
Besides manufacturers other users of present standard are foreseen:
— designers when calculating the Life Cycle Assessment (LCA) of the product used.
— Third parties implementing infrastructure rating systems to determine how the project of the construction
work has incorporated sustainability.
— Procuring entities can use the Environmental Impact Indicators in tender specifications to promote more
sustainable solutions and innovations.
— Private developers to use RTNRDs on their own land like those used on public roads.
Declared Environmental Impact Indicators will be provided according to the valid standards at the time of
product placing on the market.
1 Scope
This document complements the core rules for the product category of construction products as defined in
EN 15804:2012+A2:2019/AC:2021 and is intended to be used as a c-PCR in conjunction with that standard.
This document applies for RTNRDs in the context of a civil engineering works.
It defines the parameters to be reported, what EPD types (and life cycle stages) to be covered, what rules to be
followed to generate Life Cycle Inventories (LCI) and conduct Life Cycle Impact Assessment (LCIA) and the data
quality to be used in the development of EPDs.
In addition to the common parts of EN 15804:2012+A2:2019/AC:2021, this European Standard for RTNRD
— gives guidance on declared units.
— Defines the system boundaries.
— Provides guidance/specific rules for the determination of the reference service life.
— Gives guidance on the establishment of default scenarios.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references, the
latest edition of the referenced document (including any amendments) applies.
EN 15804:2012+A2:2019, Sustainability of construction works — Environmental product declarations — Core
rules for the product category of construction products
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 15804:2012+A2:2019/AC:2021 and
the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— IEC Electropedia: available at https://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
3.1
road traffic noise reducing device
RTNRD
device that is designed to reduce the propagation of traffic noise away from the road environment.
Note 1 to entry: The RTNRD may comprise acoustic elements (3.2) only or both structural (3.3) and acoustic elements.
Note 2 to entry: Applications of RTNRD include noise barriers (3.5), claddings (3.6), covers (3.7) and added devices (3.8).
3.2
acoustic element
element whose primary function is to provide the acoustic characteristic of the device
3.3
structural element
element whose primary function is to support or hold in place acoustic elements
3.4
self-supporting acoustic element
acoustic element including its own structural element to support itself
3.5
noise barrier
noise reducing device, which obstructs the direct transmission of airborne sound emanating from road traffic
3.6
cladding
noise reducing device, which is attached to a wall or other structure and reduces the amount of sound reflected
3.7
cover
noise reducing device, which either spans or overhangs the road
3.8
added device
added component that influences the acoustic characteristic of the original noise-reducing device
Note 1 to entry: The added device is acting primarily on the diffracted energy.
3.9
durability
ability to maintain the required technical performance throughout the working life subject to specified
maintenance under the influence of foreseeable actions.
Note 1 to entry: See EN 14389.
3.10
roadside exposure
conditions experienced by the noise reducing device installed alongside a road
4 Determination of the characteristics
4.1 Product definition
Sustainability assessment shall be made for the RTNRD products as defi
...