EN 14033-3:2009/FprA1
(Amendment)Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements
Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements
1.1 General
This European Standard deals with the significant hazards, hazardous situations and events, common to rail bound machines and arising due to the adaptation for their use on railways. These machines are intended for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Clause 4.
This European Standard applies to railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilising friction adhesion between the rail and rail wheels) but including machines that in working position are partly supported on the ballast or the formation and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment. This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex D.
This European Standard deals with the common hazards, in normal circumstances, during transport, assembly and installation, commissioning, use (including setting, programming, and process changeover), operation, cleaning, fault finding, maintenance and de-commissioning of the machines. Additional safety measures can be required by exceptional circumstances, such as extreme ambient temperatures (less than - 20 °C or greater than + 40 °C), highly corrosive or contaminating environment; e.g. due to the presence of chemicals, and potentially explosive atmospheres. Air pressure caused by the passing of high-speed trains at more than 190 km/h is also not dealt with.
NOTE 1 Specific measures for exceptional circumstances are not dealt with in this European Standard. The specific measures for exceptional circumstances introduced by a railway infrastructure manager and requirements introduced by the manuf
Bahnanwendungen - Oberbau - Schienengebundene Bau- und Instandhaltungsmaschinen - Teil 3: Allgemeine Sicherheitsanforderungen
Applications ferroviaires - Voie - Machines de construction et de maintenance empruntant exclusivement les voies ferrées - Partie 3: Prescriptions générales pour la sécurité
Železniške naprave - Zgornji ustroj - Težka tirna mehanizacija za gradnjo in vzdrževanje - 3. del: Splošne varnostne zahteve
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2011
Železniške naprave - Zgornji ustroj - Težka tirna mehanizacija za gradnjo in
vzdrževanje - 3. del: Splošne varnostne zahteve
Railway applications - Track - Railbound construction and maintenance machines - Part
3: General safety requirements
Bahnanwendungen - Oberbau - Schienengebundene Bau- und
Instandhaltungsmaschinen - Teil 3: Allgemeine Sicherheitsanforderungen
Applications ferroviaires - Voie - Machines de construction et de maintenance
empruntant exclusivement les voies ferrées - Partie 3: Prescriptions générales pour la
sécurité
Ta slovenski standard je istoveten z: EN 14033-3:2009/FprA1
ICS:
45.120 2SUHPD]DJUDGQMRLQ Equipment for
Y]GUåHYDQMHåHOH]QLFR] railway/cableway
åLþQLF construction and
maintenance
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 14033-3:2009
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
May 2011
ICS 93.100
English Version
Railway applications - Track - Railbound construction and
maintenance machines - Part 3: General safety requirements
Applications ferroviaires - Voie - Machines de construction Bahnanwendungen - Oberbau - Schienengebundene Bau-
et de maintenance empruntant exclusivement les voies und Instandhaltungsmaschinen - Teil 3: Allgemeine
ferrées - Partie 3: Prescriptions générales pour la sécurité Sicherheitsanforderungen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 256.
This draft amendment A1, if approved, will modify the European Standard EN 14033-3:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14033-3:2009/FprA1:2011: E
worldwide for CEN national Members.
Contents Page
Foreword .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.