CEN/TS 13126-3:2004
(Main)Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 3: Manoeuvring fittings for espagnolette bolts/sliding button
Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 3: Manoeuvring fittings for espagnolette bolts/sliding button
This Part of prCEN/TS 13126 specifies the requirements and test methods for durability, strength, security and function of manoeuvring fittings for espagnolette bolts/sliding buttons. It applies to operating handles or knobs with spindles, claw operating levers and sliding buttons for use on windows and door height windows.
The following fittings are excluded:
a) Operating fittings for door latches or locks;
b) Electromechanical fittings.
Baubeschläge, Beschläge für Fenster und Fenstertüren - Anforderungen und Prüfverfahren - Teil 3: Betätigungsvorrichtungen für Treibriegelverschlüsse/Schließzapfen
Dieser Teil von prCEN/TC 13126 legt die Anforderungen an und Prüfverfahren für die Dauerfunktions-tüchtigkeit, Festigkeit, Schutzwirkung und Funktionsweise von Betätigungsvorrichtungen für Treibrie-gelverschlüsse/Schließzapfen fest. Diese Technische Spezifikation gilt für Betätigungsgriffe oder Knopfdrücker, Treib-riegelgriffe und Schließzapfen für die Anwendung bei Fenstern und Fenstertüren.
Diese Norm gilt nicht für folgende Beschläge:
a) Betätigungsvorrichtungen für Türfallen oder -schlösser;
b) elektromechanische Beschläge.
Quincaillerie pour le bâtiment, ferrures de fenêtres et portes-fenêtres - Exigences et méthodes d'essai - Partie 3 : Organes de manoeuvre pour crémones/verrous
La présente partie du prCEN/TS 13126 spécifie les exigences et méthodes d'essai relatives à l'endurance, à la résistance, à la sécurité des biens et au fonctionnement des organes de manoeuvre pour crémones/verrous. Elle s'applique à toutes les poignées de manoeuvre ou boutons avec carré, poignées leviers et verrous utilisés sur les fenêtres et portes-fenêtres.
Les ferrures suivantes sont exclues :
a) les dispositifs de manoeuvre pour serrures de portes à pêne dormant ou pêne demi-tour ;
b) les dispositifs électro-mécaniques.
Stavbno okovje, pritrjevalni sistemi za okna in zastekljena vrata – Zahteve in preskusne metode – 3. del: Sprožilne naprave za gonilne zapahe/drsne gumbe
General Information
- Status
- Withdrawn
- Publication Date
- 06-Apr-2004
- Withdrawal Date
- 22-Nov-2011
- Technical Committee
- CEN/TC 33 - Doors, windows, shutters and building hardware
- Drafting Committee
- CEN/TC 33/WG 4 - Building hardware
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 23-Nov-2011
- Completion Date
- 23-Nov-2011
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 26-Nov-2011
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
BBA (British Board of Agrément)
UK construction product certification.
Sponsored listings
Frequently Asked Questions
CEN/TS 13126-3:2004 is a technical specification published by the European Committee for Standardization (CEN). Its full title is "Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 3: Manoeuvring fittings for espagnolette bolts/sliding button". This standard covers: This Part of prCEN/TS 13126 specifies the requirements and test methods for durability, strength, security and function of manoeuvring fittings for espagnolette bolts/sliding buttons. It applies to operating handles or knobs with spindles, claw operating levers and sliding buttons for use on windows and door height windows. The following fittings are excluded: a) Operating fittings for door latches or locks; b) Electromechanical fittings.
This Part of prCEN/TS 13126 specifies the requirements and test methods for durability, strength, security and function of manoeuvring fittings for espagnolette bolts/sliding buttons. It applies to operating handles or knobs with spindles, claw operating levers and sliding buttons for use on windows and door height windows. The following fittings are excluded: a) Operating fittings for door latches or locks; b) Electromechanical fittings.
CEN/TS 13126-3:2004 is classified under the following ICS (International Classification for Standards) categories: 91.190 - Building accessories. The ICS classification helps identify the subject area and facilitates finding related standards.
CEN/TS 13126-3:2004 has the following relationships with other standards: It is inter standard links to EN 13126-3:2011, EN ISO 10374:1997, EN 2349-412:2007, EN 15859:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
CEN/TS 13126-3:2004 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
CEN/TS 13126-3:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2005
Stavbno okovje, pritrjevalni sistemi za okna in zastekljena vrata – Zahteve in
preskusne metode – 3. del: Sprožilne naprave za gonilne zapahe/drsne gumbe
Building hardware, fittings for windows and door height windows - Requirements and test
methods - Part 3: Manoeuvring fittings for espagnolette bolts/sliding button
Baubeschläge, Beschläge für Fenster und Fenstertüren - Anforderungen und
Prüfverfahren - Teil 3: Betätigungsvorrichtungen für
Treibriegelverschlüsse/Schließzapfen
Quincaillerie pour le bâtiment, ferrures de fenetres et portes-fenetres - Exigences et
méthodes d'essai - Partie 3 : Organes de manoeuvre pour crémones/verrous
Ta slovenski standard je istoveten z: CEN/TS 13126-3:2004
ICS:
91.190 Stavbna oprema Building accessories
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...