Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes

This European standard specifies materials, assembly dimensions and tolerances and test requirements for fittings of copper and copper alloys with or without plating or coating. This part of prEN 1254 specifies connection end dimensions of compression ends for the purpose of joining plastics pipes for use in cold or combined hot and cold water systems or non-fuel gas systems. Fittings may comprise a combination of any of the end types specified in prEN 1254-1 to prEN 1254-5 or other standards. The standard establishes a designation system for the fittings.

Kupfer und Kupferlegierungen - Fittings - Teil 3: Klemmverbindungen für Kunststoffrohre

Diese Europäische Norm legt Werkstoffe, Anschlußmaße, Toleranzen und Anforderungen an die Prüfung von Fittings aus Kupfer und Kupferlegierungen mit oder ohne galvanischen oder nichtgalvanischen Überzug fest. Dieser Teil der prEN 1254 legt die Abmessungen fest, die für den Anschluß von Klemmverbindungen an Kunststoffrohre in Kaltwassersystemen bzw. kombinierten Kalt-/Warmwassersystemen sowie Systemen ohne Brenngas geeignet sind. Die Fittings können eine Kombination aller Anschlußarten umfassen, die in prEN 1254-1 bis prEN 1254-5 oder anderen Normen festgelegt sind.

Cuivre et alliages de cuivre - Raccords - Partie 3: Raccords à compression pour tuyaux en plastique

La présente norme européenne spécifie les matériaux, les dimensions et les tolérances d'assemblage ainsi que les prescriptions d'essai concernant les raccords en cuivre et alliages de cuivre, avec ou sans placage ou revêtement. Cette partie du prEN 1254 spécifie les dimensions des extrémités de raccords à compression destinés à l'assemblage de tuyaux en plastique utilisés dans les installations à eau froide ou chaude et froide combinée et les installations à gaz non combustible. Les raccords peuvent comporter une combinaison de plusieurs types d'extrémités spécifiés dans les prEN 1254-1 à prEN 1254-5.

Baker in bakrove zlitine - Fitingi - 3. del: Fitingi z nakrčenima priključkoma za spajanje s plastičnimi cevmi

General Information

Status
Withdrawn
Publication Date
20-Jan-1998
Withdrawal Date
20-Jan-2026
ICS
23.040.40 - Metal fittings
Technical Committee
CEN/TC 133 - Copper and copper alloys
Drafting Committee
CEN/TC 133/WG 8 - Fittings
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
26-May-2021
Completion Date
28-Jan-2026
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/131 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on pipes, tanks and ancillaries, not in contact with water intended for human consumption
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
SIST EN 1254-3:2000 - Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes

Relations

Replaced By
EN 1254-3:2021 - Copper and copper alloys - Plumbing fittings - Part 3: Compression fittings for use with plastics and multilayer pipes
Effective Date
13-Jun-2018
Refers
EN ISO 3458:2015 - Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure (ISO 3458:2015)
Effective Date
28-Jan-2026
Refers
EN ISO 15721:2001 - Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour (ISO 15721:2001)
Effective Date
28-Jan-2026
Refers
EN ISO 6509:1995 - Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981)
Effective Date
28-Jan-2026
Refers
EN ISO 15876-5:2017 - Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017)
Effective Date
28-Jan-2026
Refers
EN 1254-4:2021 - Copper and copper alloys - Plumbing fittings - Part 4: Threaded fittings
Effective Date
28-Jan-2026
Refers
EN ISO 15874-5:2013 - Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2013)
Effective Date
28-Jan-2026
Refers
EN ISO 13056:2018 - Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
Effective Date
28-Jan-2026
Refers
EN ISO 19893:2018 - Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)
Effective Date
28-Jan-2026
Refers
EN 12201-5:2024 - Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
Effective Date
28-Jan-2026
Refers
EN ISO 3503:2015 - Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015)
Effective Date
28-Jan-2026
Refers
EN 1254-1:2021 - Copper and copper alloys - Plumbing fittings - Part 1: Capillary fittings for soldering or brazing to copper tubes
Effective Date
28-Jan-2026
Refers
EN 1254-5:2021 - Copper and copper alloys - Plumbing fittings - Part 5: Capillary fittings with short ends for brazing to copper tubes
Effective Date
28-Jan-2026
Refers
EN ISO 19892:2018 - Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling (ISO 19892:2011)
Effective Date
28-Jan-2026
Refers
EN ISO 3501:2022 - Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for resistance to pull-out under constant longitudinal force (ISO 3501:2021)
Effective Date
28-Jan-2026

Frequently Asked Questions

EN 1254-3:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes". This standard covers: This European standard specifies materials, assembly dimensions and tolerances and test requirements for fittings of copper and copper alloys with or without plating or coating. This part of prEN 1254 specifies connection end dimensions of compression ends for the purpose of joining plastics pipes for use in cold or combined hot and cold water systems or non-fuel gas systems. Fittings may comprise a combination of any of the end types specified in prEN 1254-1 to prEN 1254-5 or other standards. The standard establishes a designation system for the fittings.

This European standard specifies materials, assembly dimensions and tolerances and test requirements for fittings of copper and copper alloys with or without plating or coating. This part of prEN 1254 specifies connection end dimensions of compression ends for the purpose of joining plastics pipes for use in cold or combined hot and cold water systems or non-fuel gas systems. Fittings may comprise a combination of any of the end types specified in prEN 1254-1 to prEN 1254-5 or other standards. The standard establishes a designation system for the fittings.

EN 1254-3:1998 is classified under the following ICS (International Classification for Standards) categories: 23.040.40 - Metal fittings. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 1254-3:1998 has the following relationships with other standards: It is inter standard links to EN 1254-3:2021, EN ISO 3458:2015, EN ISO 15721:2001, EN ISO 6509:1995, EN ISO 15876-5:2017, EN 1254-4:2021, EN ISO 15874-5:2013, EN ISO 13056:2018, EN ISO 19893:2018, EN 12201-5:2024, EN ISO 3503:2015, EN 1254-1:2021, EN 1254-5:2021, EN ISO 19892:2018, EN ISO 3501:2022. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 1254-3:1998 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC, 93/38/EEC; Standardization Mandates: M/131, M/BC/CEN/88/15. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 1254-3:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kupfer und Kupferlegierungen - Fittings - Teil 3: Klemmverbindungen für KunststoffrohreCuivre et alliages de cuivre - Raccords - Partie 3: Raccords a compression pour tuyaux en plastiqueCopper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes77.150.30Bakreni izdelkiCopper products23.040.40Kovinski fitingiMetal fittingsICS:Ta slovenski standard je istoveten z:EN 1254-3:1998SIST EN 1254-3:2000en01-november-2000SIST EN 1254-3:2000SLOVENSKI
STANDARD
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...