EN ISO 8662-4:1995
(Main)Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994)
Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994)
This part of ISO 8662 specifies a laboratory method for measuring the vibrations at the handles of hand-held power-driven grinders. It is a type-test procedure for establishing the magnitude of vibration in the handle of a power tool fitted with a specified test wheel. The power tools covered by this part of ISO 8662 may be pneumatically driven, or driven by other means. Typical tools are illustrated in figure 1. It is intended that the results be used to compare different models of the same type of power tool, i.e. power tools intended for use with the same grinding wheel (same diameter and same maximum peripheral speed). If an evaluation of vibration exposure is required, then measurements in a work situation will be required.
Handgehaltene motorbetriebene Maschinen - Messung mechanischer Schwingungen am Handgriff - Teil 4: Schleifmaschinen (ISO 8662-4:1994)
Dieser Teil von ISO 8660 legt ein Labor-Meßverfahren zur Messung von Schwingungen an den Handgriffen von solchen handgehaltenen motorbetriebenen Schleifmaschinen fest, die in EN 792-7 angegeben sind. Es handelt sich um ein Meßverfahren zur Ermittlung von Schwingungskennwerten am Handgriff einer motorbetriebenen Maschine, an der eine bestimmte Ersatzschleifscheibe befestigt ist. Die Maschinen, die dieser Teil von ISO 8662 behandelt, können pneumatisch oder auf andere Weise angetrieben sein. In Bild 1 sind typische Maschinen dargestellt.
Machines à moteur portatives - Mesurage des vibrations au niveau des poignées - Partie 4: Meuleuses (ISO 8662-4:1994)
Gnana ročna orodja - Meritve vibracij na ročajih - 4. del: Brusilniki (ISO 8662-4:1994)
General Information
- Status
- Withdrawn
- Publication Date
- 12-Apr-1995
- Withdrawal Date
- 14-Dec-2009
- Technical Committee
- CEN/TC 231 - Mechanical vibration and shock
- Drafting Committee
- CEN/TC 231/WG 2 - Hand-arm vibration
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 15-Dec-2009
- Completion Date
- 15-Dec-2009
- Directive
- 89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 08-Jun-2022
- Effective Date
- 19-Dec-2009
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
NSF International
Global independent organization facilitating standards development and certification.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
Sponsored listings
Frequently Asked Questions
EN ISO 8662-4:1995 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994)". This standard covers: This part of ISO 8662 specifies a laboratory method for measuring the vibrations at the handles of hand-held power-driven grinders. It is a type-test procedure for establishing the magnitude of vibration in the handle of a power tool fitted with a specified test wheel. The power tools covered by this part of ISO 8662 may be pneumatically driven, or driven by other means. Typical tools are illustrated in figure 1. It is intended that the results be used to compare different models of the same type of power tool, i.e. power tools intended for use with the same grinding wheel (same diameter and same maximum peripheral speed). If an evaluation of vibration exposure is required, then measurements in a work situation will be required.
This part of ISO 8662 specifies a laboratory method for measuring the vibrations at the handles of hand-held power-driven grinders. It is a type-test procedure for establishing the magnitude of vibration in the handle of a power tool fitted with a specified test wheel. The power tools covered by this part of ISO 8662 may be pneumatically driven, or driven by other means. Typical tools are illustrated in figure 1. It is intended that the results be used to compare different models of the same type of power tool, i.e. power tools intended for use with the same grinding wheel (same diameter and same maximum peripheral speed). If an evaluation of vibration exposure is required, then measurements in a work situation will be required.
EN ISO 8662-4:1995 is classified under the following ICS (International Classification for Standards) categories: 13.160 - Vibration and shock with respect to human beings; 25.140.01 - Hand-held tools in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 8662-4:1995 has the following relationships with other standards: It is inter standard links to EN ISO 28927-4:2010, EN ISO 28927-1:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 8662-4:1995 is associated with the following European legislation: EU Directives/Regulations: 89/392/EEC, 98/37/EC; Standardization Mandates: M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 8662-4:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2000
*QDQDURþQDRURGMD0HULWYHYLEUDFLMQDURþDMLKGHO %UXVLOQLNL ,62
Hand-held portable power tools - Measurement of vibrations at the handle - Part 4:
Grinders (ISO 8662-4:1994)
Handgehaltene motorbetriebene Maschinen - Messung mechanischer Schwingungen am
Handgriff - Teil 4: Schleifmaschinen (ISO 8662-4:1994)
Machines a moteur portatives - Mesurage des vibrations au niveau des poignées - Partie
4: Meuleuses (ISO 8662-4:1994)
Ta slovenski standard je istoveten z: EN ISO 8662-4:1995
ICS:
13.160 Vpliv vibracij in udarcev na Vibration and shock with
ljudi respect to human beings
25.140.01 5RþQDRURGMDQDVSORãQR Hand-held tools in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...