iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13034:2005/prA1

(Amendment)

Protective clothing against liquid chemicals - Performance requirements for chemical protective suits offering limited protective performance against liquid chemicals (Type 6 equipment)

Protective clothing against liquid chemicals - Performance requirements for chemical protective suits offering limited protective performance against liquid chemicals (Type 6 equipment)

- delete the last row of table 1 (reference to EN 14325, clause 4.14)
- add, at the end of clause 4.1, the following note: "If resistance to heat and flame is required, the chemical protective clothing should be tested and marked according to the appropriate standard." (taken from EN 14325, 4.14)
add in clause 7 (information) the warning phrase: "Flammable material. Keep away from fire"

Schutzkleidung gegen flüssige Chemikalien - Leistungsanforderungen an Chemikalienschutzkleidung mit eingeschränkter Schutzleistung gegen flüssige Chemikalien (Ausrüstung Typ 6)

Vêtements de protection contre les produits chimiques liquides - Exigences relatives aux vêtements de protection chimique offrant une protection limitée contre les produits chimiques liquides (équipement de type 6)

Varovalna obleka pred učinki tekočih kemikalij - Zahteve za izdelavo oblačil za zaščito pred kemikalijami, ki nudijo omejeno zaščito pred tekočimi kemikalijami (oprema tipa 6)

General Information

Status
Not Published
ICS
13.340.10 - Protective clothing
Technical Committee
CEN/TC 162 - Protective clothing including hand and arm protection and lifejackets
Drafting Committee
CEN/TC 162/WG 3 - Protective clothing against chemicals, infective agents and radioactive contamination
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
04-Mar-2009
Due Date
14-Feb-2010
Completion Date
04-Mar-2009
Directive
89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
Mandate
M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
Ref Project
SIST EN 13034:2005/kprA1:2009 - Protective clothing against liquid chemicals - Performance requirements for chemical protective suits offering limited protective performance against liquid chemicals (Type 6 equipment)

Relations

Merged Into
EN 13034:2005+A1:2009 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
Effective Date
19-Jan-2023
Amends
EN 13034:2005 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
Effective Date
22-Dec-2008

Buy Standard

EN 13034:2005/kprA1:2009EN 13034:2005/kprA1:2009
PreviousNext
Draft
EN 13034:2005/kprA1:2009
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2009
9DURYDOQDREOHNDSUHGXþLQNLWHNRþLKNHPLNDOLM=DKWHYH]DL]GHODYRREODþLO]D
]DãþLWRSUHGNHPLNDOLMDPLNLQXGLMRRPHMHQR]DãþLWRSUHGWHNRþLPLNHPLNDOLMDPL
RSUHPDWLSD
Protective clothing against liquid chemicals - Performance requirements for chemical
protective suits offering limited protective performance against liquid chemicals (Type 6
equipment)
Schutzkleidung gegen flüssige Chemikalien - Leistungsanforderungen an
Chemikalienschutzkleidung mit eingeschränkter Schutzleistung gegen flüssige
Chemikalien (Ausrüstung Typ 6)
Vêtements de protection contre les produits chimiques liquides - Exigences relatives aux
vêtements de protection chimique offrant une protection limitée contre les produits
chimiques liquides (équipement de type 6)
Ta slovenski standard je istoveten z: EN 13034:2005/prA1
ICS:
13.340.10 Varovalna obleka Protective clothing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 13034:2005
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
December 2008
ICS 13.340.10
English Version
Protective clothing against liquid chemicals - Performance
requirements for chemical protective suits offering limited
protective performance against liquid chemicals (Type 6
equipment)
Vêtements de protection contre les produits chimiques Schutzkleidung gegen flüssige Chemikalien -
liquides - Exigences relatives aux vêtements de protection Leistungsanforderungen an Chemikalienschutzkleidung mit
chimique offrant une protection limitée contre les produits eingeschränkter Schutzleistung gegen flüssige Chemikalien
chimiques liquides (équipement de type 6) (Ausrüstung Typ 6)
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 162.
This draft amendment A1, if approved, will modify the European Standard EN 13034:2005. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 13997:2024(Main)
Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects (ISO 13997:2024)
oSIST prEN ISO 13997:2024

This document specifies a tomodynamometer cut test method and related calculations, for use on materials and assemblies designed for protective clothing, including gloves. The test determines resistance to cutting by sharp edges, such as knives, sheet metal parts, swarf, glass, bladed tools and castings.
When this document is cited as a test method in a material or product requirement standard, that standard contains the necessary information to permit the application of this document to the particular product.
This test does not provide data on the resistance to penetration by pointed objects such as needles and thorns, or the point of sharp-edged blades. The test described in this document is not considered suitable for testing materials made from chain mail and metal plates. The text of this document does not include provisions for the safeguard of the operator.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13506-1:2024(Main)
Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin (ISO 13506-1:2024)
SIST EN ISO 13506-1:2024

This document specifies the overall requirements, equipment and calculation methods to provide results that can be used for evaluating the performance of complete garments or protective clothing ensembles exposed to short duration flame engulfment.
This test method establishes a rating system to characterize the thermal protection provided by single-layer and multi-layer garments made of flame resistant materials. The rating is based on the measurement of heat transfer to a full-size manikin exposed to convective and radiant energy in a laboratory simulation of a fire with controlled heat flux, duration and flame distribution. The heat transfer data is summed over a prescribed time to give the total transferred energy. Transferred energy and thermal manikin protection factor (TMPF) assessment methods provide a means to quantify product performance.
The exposure heat flux is limited to a nominal level of 84 kW/m2 and durations of 3 s to 20 s dependant on the risk assessment and expectations from the thermal insulating capability of the garment.
The results obtained apply only to the particular garments or ensembles, as tested, and for the specified conditions of each test, particularly with respect to the heat flux, duration and flame distribution.
This test method covers visual evaluation, observation, inspection and documentation on the overall behaviour of the test specimen(s) before, during and after the exposure. The effects of body position and movement are not addressed in this test method.
The heat flux measurements can also be used to calculate the predicted skin burn injury resulting from the exposure (see ISO 13506-2).
This test method does not simulate high radiant exposures such as those found in arc flash exposures, some types of fire exposures where liquid or solid fuels are involved, nor exposure to nuclear explosions.
NOTE            This test method is complex and requires a high degree of technical expertise in both the test setup and operation. Even minor deviations from the instructions in this test method can lead to significantly different test results.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13506-2:2024(Main)
Protective clothing against heat and flame - Part 2: Skin burn injury prediction - Calculation requirements and test cases (ISO 13506-2:2024)
SIST EN ISO 13506-2:2024

This document provides technical details for calculating predicted burn injury to human skin when its surface is subject to a varying heat flux, such as may occur due to energy transmitted through and by a garment or protective clothing ensemble exposed to flames. A series of test cases are provided against which the burn injury prediction calculation method is verified. It also contains requirements for the in situ calibration of the thermal energy sensor — skin injury prediction system for the range of heat fluxes that occur under garments.
The skin burn injury calculation methods as presented in this test method do not include terms for handling short wavelength radiation that may penetrate the skin. The latter include arc flashes, some types of fire exposures with liquid or solid fuels, and nuclear sources.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17491-4:2024(Main)
Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2024)
SIST EN ISO 17491-4:2024

This document specifies the test method for determining the resistance of chemical protective clothing to penetration by sprays of liquid chemicals at two different levels of intensity:
a)       Method A: low-level spray test. This is applicable to clothing that covers the full body surface and is intended to be worn when there is a potential risk of exposure to small quantities of spray or accidental low-volume splashes of a liquid chemical.
b)       Method B: high-level spray test. This is applicable to clothing with spray-tight connections between different parts of the clothing and, if applicable, between the clothing and other items of personal protective equipment, which covers the full body surface and which is intended to be worn when there is a risk of exposure to sprayed liquid chemical.
This document does not apply to chemical permeation resistance of the materials from which the chemical protective clothing is made.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14325:2018+A1:2024(Main)
Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages
SIST EN 14325:2018+A1:2024

This European Standard specifies the performance classification and test methods for materials used in chemical protective clothing, including gloves and footwear. The gloves and boots should have the same chemical protective barrier requirements as the fabric when an integral part of the clothing. This is a reference standard to which chemical protective clothing performance standards may refer in whole or in part, but this standard is not exhaustive in the sense that product standards may well require testing according to test method standards which are not included in this standard.
While these performance levels are intended to relate to the usage to which the chemical protective clothing is to be put, it is essential that the chemical protective clothing manufacturer or supplier indicate the intended use of the protective clothing and that the user (specifier) carries out a risk assessment in order to establish the correct performance level for the intended task.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 24231:2024(Main)
Protective clothing - Protection against rain - Test method for ready-made garments against high-energy droplets from above (ISO 24231:2024)
SIST EN ISO 24231:2024

This document specifies a test method for determining the liquid tightness of clothing for protection against rain, using a static manikin exposed to large amount of high energy droplets from above. It is applicable to the testing of jackets, trousers, coats and one- or two-piece suits.
This document is not applicable to the testing of garments for resistance to other weather conditions, e.g. snow, hail-, or strong winds.
NOTE            For general background of the rain simulation, see Annex A.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11610:2023(Main)
Protective clothing - Vocabulary (ISO 11610:2023)
SIST EN ISO 11610:2023

This document contains a list of terms which are frequently used in the standardization of protective clothing (5.1.4) and protective equipment worn on the body, including hand and arm protection and lifejackets, and definitions of these terms.
The definitions are intended to support an unambiguous use of the terms listed.
This document is intended to serve as a reference document for the Working Groups of CEN/TC 162 and ISO/TC 94/SC 13 to ascertain what definitions already exist and may be used for setting up new standards and to provide guidance in the elaboration of new definitions.
NOTE - In addition to text written in the official ISO languages (English, French), this document gives text in German. This text is published under the responsibility of the Member Body for Germany (DIN) and is given for information only. Only the text given in the official lan­guages can be considered as ISO text.

  • Standard
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    160 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14058:2017+A1:2023(Main)
Protective clothing - Garments for protection against cool environments
SIST EN 14058:2018+A1:2023

This European Standard specifies requirements and test methods for the performance of garments for protection against the effects of cool environments above −5 °C (see Annex C). These effects comprise not only low air temperatures, but also humidity and air velocity.
Cold protective ensembles are excluded from this standard.
The protective effects and requirements of footwear, gloves and separate head wear are excluded from the scope of this standard.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6942:2022(Main)
Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2022)
SIST EN ISO 6942:2022

This document specifies two complementary methods (method A and method B) for determining the behaviour of materials for heat protective clothing subjected to heat radiation.
These tests are carried out on representative single or multi-layer textiles or other materials intended for clothing for protection against heat. They are also applicable to assemblies, which correspond to the overall build up of a heat protective clothing assembly with or without underclothing,
Method A serves for visual assessment of any changes in the material after the action of heat radiation. With method B the protective effect of the materials is determined. The materials may be tested either by both methods or only by one of them.
The tests according to these two methods serve to classify materials; however, to be able to make a statement or prediction as to the suitability of a material for protective clothing additional criteria must be taken into account.
Since the tests are carried out at room temperature the results do not necessarily correspond to the behaviour of the materials at higher ambient temperatures and therefore are only to a limited extent suitable for predicting the performance of the protective clothing made from the materials under test.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17673:2022(Main)
Protective clothing - Protection against heat and flame - Requirements and test methods for garments with integrated smart textiles and non textile elements
SIST EN 17673:2022

This document applies to garments and assembly of garments providing protection against heat and flame, with integrated smart textiles and non-textile elements for enhanced health, safety and survival capabilities.
This document does not concern validating claims that the integrated smart textiles and non-textile elements substitute directly any protection provided by the garment from a heat and flame perspective.
The integrated smart textiles and non-textile elements could include not only the parts integrated into the protective garment but also connections to transmit the data generated or exchange data with external devices. It is not within the scope of this document to evaluate either the data storage or transmission (including connectivity) to the external devices, nor the external devices. This document evaluates only the smart textiles and non-textile elements integrated into the garment.
This document supplements the requirements of EN ISO 11612 and EN ISO 13688 and does not replace any of the requirements cited in those documents.
This document sets additional testing and performance requirements linked specifically to the garments and assembly of garments providing protection against heat and flame, with integrated smart textiles and non-textile elements for enhanced health, safety and survival capabilities. These additional requirements will depend on the functionality of the smart textiles or non-textile element and its needed efficacy during heat and flame hazards and risks from an electrical/electronic safety perspective in these situations.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day