EN 10163-1:1991
(Main)Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections - Part 1: General requirements
Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections - Part 1: General requirements
1.1 This European Standard specifies the general requirements for the surface condition of the hot-rolled steel plates, wide flats and sections. It covers the requirements on the type, the permissible depth and the permissible size of the surface area affected by: - discontinuities (impefections and defects) and - repairs by grinding and/or welding. 1.2 This European Standard shall be applied so far as no other requirements for the surface condition exist in the appropriate material or product standard. The requirements laid down in the appropriate material or product standard shall always prevail. 1.3 This part 1 covers the general delivery requirements for the surface quality of host rolled steel products such as: - Plates and wide flats, see part 2; - Sections, see part 3.
Lieferbedingungen für die Oberflächenbeschaffenheit von warmgewalzten Stahlerzeugnissen (Blech, Breitflachstahl und Profile) - Teil 1: Allgemeine Anforderungen
Diese Europäische Norm enthält die allgemeinen Anforderungen an die Oberflächenbeschaffenheit von warmgewalztem Blech und Breitflachstahl sowie von warmgewalzten Profilen aus Stahl. Sie gilt für die Anforderungen an die Art, die zulässige Tiefe und zulässige Grösse der beeinflussten Oberflächenzone bei : - Ungänzen (Unvollkommenheiten und Fehler) und - Ausbesserungen durch Schleifen und/oder Schweissen.
Conditions de livraison relatives à l'état de surface des tôles, larges plats et profilés en acier laminés à chaud - Partie 1: Généralités
La présente norme européenne définit les conditions générales qui s'appliquent à l'état de surface des tôles, larges-plats et profilés en acier laminés à chaud. Elle concerne le type, la profondeur et la surface admissible des : - disontinuités de surface (imperfections et défauts), - réparations par meulage et/ou par soudage.
Dobavni pogoji za videz površine vroče valjanih jeklenih pločevin in profilov - 1. del: Splošni pogoji
General Information
- Status
- Withdrawn
- Publication Date
- 20-Aug-1991
- Withdrawal Date
- 07-Dec-2004
- Technical Committee
- ECISS/TC 103 - Structural steels other than reinforcements
- Drafting Committee
- ECISS/TC 10 - Structural steels - Qualities
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 08-Dec-2004
- Completion Date
- 08-Dec-2004
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10163-1:1991 is a standard published by the European Committee for Standardization (CEN). Its full title is "Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections - Part 1: General requirements". This standard covers: 1.1 This European Standard specifies the general requirements for the surface condition of the hot-rolled steel plates, wide flats and sections. It covers the requirements on the type, the permissible depth and the permissible size of the surface area affected by: - discontinuities (impefections and defects) and - repairs by grinding and/or welding. 1.2 This European Standard shall be applied so far as no other requirements for the surface condition exist in the appropriate material or product standard. The requirements laid down in the appropriate material or product standard shall always prevail. 1.3 This part 1 covers the general delivery requirements for the surface quality of host rolled steel products such as: - Plates and wide flats, see part 2; - Sections, see part 3.
1.1 This European Standard specifies the general requirements for the surface condition of the hot-rolled steel plates, wide flats and sections. It covers the requirements on the type, the permissible depth and the permissible size of the surface area affected by: - discontinuities (impefections and defects) and - repairs by grinding and/or welding. 1.2 This European Standard shall be applied so far as no other requirements for the surface condition exist in the appropriate material or product standard. The requirements laid down in the appropriate material or product standard shall always prevail. 1.3 This part 1 covers the general delivery requirements for the surface quality of host rolled steel products such as: - Plates and wide flats, see part 2; - Sections, see part 3.
EN 10163-1:1991 is classified under the following ICS (International Classification for Standards) categories: 77.140.50 - Flat steel products and semi-products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10163-1:1991 has the following relationships with other standards: It is inter standard links to EN 10163-1:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10163-1:1991 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071, M/BC/CEN/87/15. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10163-1:1991 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lieferbedingungen für die Oberflächenbeschaffenheit von warmgewalzten Stahlerzeugnissen (Blech, Breitflachstahl und Profile) - Teil 1: Allgemeine AnforderungenConditions de livraison relatives a l'état de surface des tôles, larges plats et profilés en acier laminés a chaud - Partie 1: GénéralitésDelivery requirements for surface condition of hot rolled steel plates, wide flats and sections - Part 1: General req
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...