EN 683-2:1996
(Main)Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
This part of EN 683 specifies the mechanical properties of wrought aluminium and aluminium alloy finstock. It applies to flat rolled products. The chemical composition limits of these materials are specified in EN 573-3. The designations of wrought aluminium and aluminium alloys and the temper designations used in this standard are specified in EN 573-1 and EN 573-2 and EN 515 respectively.
Aluminium und Aluminiumlegierungen - Vormaterial für Wärmeaustauscher (Finstock) - Teil 2: Mechanische Eigenschaften
Dieser Teil von EN 683 legt die mechanischen Eigenschaften für Vormaterial für Wärmeaustauscher (Finstock) aus Aluminium und Aluminiumlegierungen fest. Er gilt für flachgewalzte Erzeugnisse. Die chemische Zusammensetzung dieser Werkstoffe ist in EN 573-3 angegeben. Die in dieser Norm verwandten Bezeichnungen für Aluminium und Aluminiumlegierungen sind in EN 573-1 und EN 573-2 und die Bezeichnungen der Werkstoffzustände in EN 515 festgelegt.
Aluminium et alliages d'aluminium - Bandes pour échangeurs thermiques - Partie 2: Caractéristiques mécaniques
La présente partie de l'EN 683 prescrit les caractéristiques mécaniques des bandes pour échangeurs thermiques en aluminium et alliages d'aluminium corroyés. Elle s'applique aux produits laminés plats. La composition chimique deminés à plat. La composition chimique de ces matériaux est donnée dans la ces matériaux est donnée dans la norme EN 573-3. La désignation de l'aluminium et des alliages d'aluminium, ainsi que la désignation des états métallurgiques utilisées dans la présente norme européenne sont spécifiées respectivement à l'EN 573-1 et 2 et à l'EN 515.
Aluminij in aluminijeve zlitine - Hladno valjani polizdelki za toplotne izmenjevalnike - 2. del: Mehanske lastnosti
General Information
- Status
- Withdrawn
- Publication Date
- 20-Aug-1996
- Withdrawal Date
- 19-Dec-2006
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 6 - Aluminium foil and finstock
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 20-Dec-2006
- Completion Date
- 20-Dec-2006
Relations
- Replaced By
EN 683-2:2006 - Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties - Effective Date
- 22-Dec-2008
- Effective Date
- 09-Feb-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 683-2:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties". This standard covers: This part of EN 683 specifies the mechanical properties of wrought aluminium and aluminium alloy finstock. It applies to flat rolled products. The chemical composition limits of these materials are specified in EN 573-3. The designations of wrought aluminium and aluminium alloys and the temper designations used in this standard are specified in EN 573-1 and EN 573-2 and EN 515 respectively.
This part of EN 683 specifies the mechanical properties of wrought aluminium and aluminium alloy finstock. It applies to flat rolled products. The chemical composition limits of these materials are specified in EN 573-3. The designations of wrought aluminium and aluminium alloys and the temper designations used in this standard are specified in EN 573-1 and EN 573-2 and EN 515 respectively.
EN 683-2:1996 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 683-2:1996 has the following relationships with other standards: It is inter standard links to EN 683-2:2006, EN 60931-2:1996. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 683-2:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1998
Aluminij in aluminijeve zlitine - Hladno valjani polizdelki za toplotne izmenjevalnike
- 2. del: Mehanske lastnosti
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
Aluminium und Aluminiumlegierungen - Vormaterial für Wärmeaustauscher (Finstock) -
Teil 2: Mechanische Eigenschaften
Aluminium et alliages d'aluminium - Bandes pour échangeurs thermiques - Partie 2:
Caractéristiques mécaniques
Ta slovenski standard je istoveten z: EN 683-2:1996
ICS:
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN 683
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...