Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 141: Size 4 plug for rack and panel applications - Product standard

This European Standard specifies the size 4 plug for rack and panel applications used in the family of modular rectangular electrical and optical connector with rectangular inserts, operating temperature 175 °C (or 125 °C) continuous.
The receptacle corresponding to this plug is defined in EN 4644-142.

Luft- und Raumfahrt - Elektrische und optische Rechtecksteckverbinder, modular, rechteckige Kontakteinsätze, Dauerbetriebstemperatur 175 °C (oder 125 °C) konstant - Teil 141: Freier Steckverbinder, Größe 4, für Einschubanwendungen - Produktnorm

Série aérospatiale - Connecteur, électrique et optique, rectangulaire, modulaire, à inserts rectangulaires, température de fonctionnement 175 °C (ou 125 °C) continu - Partie 141: Fiche, taille 4, pour applications rackables - Norme de produit

La présente Norme Européenne spécifie les fiches de taille 4 pour une application rackable utilisée dans la
famille des connecteurs électriques et optiques rectangulaires, modulaires avec des inserts rectangulaires,
température d’utilisation 175 °C (ou 125 °C) continu.
L’embase correspondante à cette fiche est définie dans l’EN 4644-142.

Aeronavtika - Konektor, električni in optični, pravokotni, modularni, pravokotni vložki, stalna delovna temperatura 175 °C (ali 125 °C) - 141. del: Vtič velikosti 4 za stojalo in ploščo - Standard za izdelek

Ta evropski standard določa značilnosti vtičev velikosti 4 za stojalo in ploščo, ki se uporabljajo v družini modularnih pravokotnih električnih in optičnih konektorjev s pravokotnimi vložki, stalna delovna temperatura 175 °C (ali 125 °C). Vtičnica, ki ustreza temu vtiču, je opredeljena v EN 4644-142.

General Information

Status
Withdrawn
Publication Date
01-Nov-2011
Withdrawal Date
20-Jan-2026
ICS
49.060 - Aerospace electric equipment and systems
 
49.090 - On-board equipment and instruments
Technical Committee
ASD-STAN - Aerospace
Drafting Committee
ASD-STAN/D 2 - Electrical
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
20-Apr-2016
Completion Date
28-Jan-2026
Ref Project
SIST EN 4644-141:2012 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 141: Size 4 plug for rack and panel applications - Product standard

Relations

Replaced By
EN 4644-141:2016 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 141: Size 4 plug for rack and panel applications, class C and D - Product standard
Effective Date
08-Jun-2022
Refers
EN 4644-002:2016 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 002: Specification of performance and contact arrangements
Effective Date
28-Jan-2026
Refers
EN 4644-001:2017 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 001: Technical specification
Effective Date
28-Jan-2026
Refers
EN 4644-142:2016 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 142: Size 4 receptacle for rack and panel application, class C and D - Product standard
Effective Date
28-Jan-2026
Referred By
EN ISO 28927-2:2009 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)
Effective Date
28-Jan-2026
Referred By
EN ISO 28927-13:2022 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 13: Fastener driving tools (ISO 28927-13:2022)
Effective Date
28-Jan-2026
Referred By
EN ISO 11148-3:2010 - Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2010)
Effective Date
28-Jan-2026
Referred By
EN ISO 28927-8:2009 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009)
Effective Date
28-Jan-2026
Referred By
EN ISO 28927-7:2009 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009)
Effective Date
28-Jan-2026
Referred By
EN ISO 28927-3:2009 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009)
Effective Date
28-Jan-2026
Referred By
EN ISO 28927-5:2009 - Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009)
Effective Date
28-Jan-2026
Referred By
EN ISO 11148-4:2010 - Hand-held non-electric power tools - Safety requirements - Part 4: Non­rotary percussive power tools (ISO 11148-4:2010)
Effective Date
28-Jan-2026
Referred By
EN ISO 11148-3:2012 - Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012)
Effective Date
28-Jan-2026
Referred By
EN ISO 11148-1:2011 - Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)
Effective Date
28-Jan-2026
Referred By
EN ISO 11148-4:2012 - Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012)
Effective Date
28-Jan-2026

Get Certified

Connect with accredited certification bodies for this standard

National Aerospace and Defense Contractors Accreditation Program (NADCAP)

Global cooperative program for special process quality in aerospace.

ANAB United States Verified
Visit Website

NSF-ISR

NSF International Strategic Registrations.

ANAB United States Verified
Visit Website

Orion Registrar Inc.

US-based certification body for management systems.

ANAB United States Verified
Visit Website

Sponsored listings

Frequently Asked Questions

EN 4644-141:2011 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 141: Size 4 plug for rack and panel applications - Product standard". This standard covers: This European Standard specifies the size 4 plug for rack and panel applications used in the family of modular rectangular electrical and optical connector with rectangular inserts, operating temperature 175 °C (or 125 °C) continuous. The receptacle corresponding to this plug is defined in EN 4644-142.

This European Standard specifies the size 4 plug for rack and panel applications used in the family of modular rectangular electrical and optical connector with rectangular inserts, operating temperature 175 °C (or 125 °C) continuous. The receptacle corresponding to this plug is defined in EN 4644-142.

EN 4644-141:2011 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems; 49.090 - On-board equipment and instruments. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 4644-141:2011 has the following relationships with other standards: It is inter standard links to EN 4644-141:2016, EN 4644-002:2016, EN 4644-001:2017, EN 4644-142:2016, EN ISO 28927-2:2009, EN ISO 28927-13:2022, EN ISO 11148-3:2010, EN ISO 28927-8:2009, EN ISO 28927-7:2009, EN ISO 28927-3:2009, EN ISO 28927-5:2009, EN ISO 11148-4:2010, EN ISO 11148-3:2012, EN ISO 11148-1:2011, EN ISO 11148-4:2012. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 4644-141:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische und optische Rechtecksteckverbinder, modular, rechteckige Kontakteinsätze, Dauerbetriebstemperatur 175 °C (oder 125 °C) konstant - Teil 141: Freier Steckverbinder, Größe 4, Geräteeinschub - ProduktnormSérie aérospatiale - Connecteur, électrique et optique, rectangulaire, modulaire, à inserts rectangulaires, température de fonctionnement 175 °C (ou 125 °C) continu - Partie 141: Fiche, taille 4, pour applications rackables - Norme de produitAerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 141: Size 4 plug for rack and panel applications - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4644-141:2011SIST EN 4644-141:2012en,fr01-januar-2012SIST EN 4644-141:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4644-141
November 2011 ICS 49.060; 49.090 English Version
Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 141: Size 4 plug for rack and panel applications - Product standard
Série aérospatiale - Connecteur, électrique et optique, rectangulaire, modulaire, à inserts rectangulaires, température de fonctionnement 175 °C (ou 125 °C) continu - Partie 141: Fiche, taille 4, pour applications rackables - Norme de produit
Luft- und Raumfahrt - Elektrische und optische Rechtecksteckverbinder, modular, rechteckige Kontakteinsätze, Dauerbetriebstemperatur 175 °C (oder 125 °C) konstant - Teil 141: Freier Steckverbinder, Größe 4, Geräteeinschub - Produktnorm This European Standard was approved by CEN on 22 July 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4644-141:2011: ESIST EN 4644-141:2012
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...