EN ISO 13982-1:2004/A1:2010
(Amendment)Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) - Amendment 1 (ISO 13982-1:2004/Amd 1:2010)
Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) - Amendment 1 (ISO 13982-1:2004/Amd 1:2010)
This part of ISO 13982 specifies the minimum requirements for chemical protective clothing resistant to penetration by airborne solid particles (type 5). These garments are full-body protective clothing, i.e. covering trunk, arms and legs, such as one-piece coveralls or two piece suits, with or without hood or visors, with or without foot protection. Requirements for component parts, such as hoods, gloves, boots, visors or respiratory protective equipment might be specified in other International and European Standards. This part of ISO 13982 is applicable only to airborne solid particulates. It is not applicable to other forms of challenge by solid chemicals, e.g. penetration of chemical dust through materials by rubbing or flexing, which may form the object of separate standards.
Schutzkleidung gegen feste Partikeln - Teil 1: Leistungsanforderungen an Chemikalienschutzkleidung, die für den gesamten Körper einen Schutz gegen luftgetragene feste Partikeln gewährt (Kleidung Typ 5) - Änderung 1 (ISO 13982-1:2004/Amd 1:2010)
Vêtements de protection à utiliser contre les particules solides - Partie 1: Exigences de performance des vêtements de protection contre les produits chimiques offrant une protection au corps entier contre les particules solides transportées par l'air (vêtements de type 5) - Amendement 1 (ISO 13982-1:2004/Amd 1:2010)
Varovalna obleka za varovanje pred trdnimi delci - 1. del: Zahteve za varovalno obleko, ki varuje pred kemikalijami in zagotavlja zaščito celega telesa pred trdnimi delci v zraku (oblačilo tipa 5) - Dopolnilo 1 (ISO 13982-1:2004/AM 1:2010)
Ta del ISO 13982 določa minimalne zahteve za varovalno obleko, ki varuje pred kemikalijami, ki je odporna proti penetraciji trdnih delcev v zraku (tipa 5). Ta oblačila so oblačila za zaščito celotnega telesa, tj. pokrivajo trup, roke in noge, kot so pajaci iz enega kosa ali obleke iz dveh kosov, s kapuco ali brez nje ali ščitnika in z zaščito za stopala ali brez nje. Zahteve za sestavne dele, kot so kapuce, rokavice, škornji, ščitniki ali dihalna zaščitna oprema, so lahko opredeljene v drugih mednarodnih in evropskih standardih. Ta del ISO 13982 velja le za trdne delce v zraku. Ne velja za druge oblike izzivov, ki jih prinašajo trdne kemikalije, npr. penetracijo kemičnega prahu skozi materiale z drgnjenjem ali upogibanjem, kar se lahko razvije v predmet ločenega standarda.
General Information
- Status
- Published
- Publication Date
- 14-Oct-2010
- Withdrawal Date
- 29-Apr-2011
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 15-Oct-2010
- Due Date
- 16-Sep-2011
- Completion Date
- 15-Oct-2010
Relations
- Effective Date
- 22-Dec-2008
Overview
EN ISO 13982-1:2004/A1:2010 is an amendment to the European adoption of ISO 13982‑1 covering chemical protective clothing (Type 5) that provides full‑body protection against airborne solid particulates. Prepared by CEN in collaboration with ISO/TC 94, this amendment (approved October 2010) updates referenced test methods, clarifies flame‑resistance provisions, and adds labelling and marking requirements to support conformity with EU regulatory requirements.
Key topics and requirements
- Scope: Performance requirements for Type 5 protective clothing designed to protect the full body from airborne solid particulates.
- Referenced test methods:
- Replaces one referenced document with ISO 13982‑2 (test method for determination of inward leakage of fine aerosol particles into suits).
- Adds EN 13274‑4:2001 (flame tests) as a referenced standard where flame resistance is required.
- Flame resistance (new provisions):
- If heat/flame resistance is required, three test specimens shall be tested per EN 13274‑4:2001, method 3, with the outer side exposed to flame.
- Material shall not melt and afterflame < 5 s.
- Labelling and information:
- Add the number and year of the relevant EN standard when clothing has been tested for heat/flame resistance.
- Unless flame resistance is demonstrated per the appropriate standard, garments must carry the warning: “Flammable material. Keep away from fire.”
- Regulatory context: Annex ZA confirms this standard provides a means of presumption of conformity with the Essential Requirements of EU Directive 89/686/EEC within its scope.
Practical applications and users
- Manufacturers of chemical protective suits (Type 5) use this standard to design, test and document garments for protection against airborne particulates.
- Testing and certification bodies apply the referenced test methods (ISO 13982‑2, EN 13274‑4) to verify inward leakage and flame behaviour.
- Safety engineers, procurement officers and compliance managers use the standard to specify PPE for industries handling powders, powders aerosolised in operations, pharmaceuticals, mining, agriculture, and cleanup of contaminated sites.
- Regulatory and conformity assessment stakeholders rely on the standard for CE‑marking and evidence of conformity with European PPE requirements (per Annex ZA).
Related standards
- ISO 13982‑2 - Test method for inward leakage of aerosols into suits (referenced)
- EN 13274‑4:2001 - Respiratory protective devices - Flame tests (added)
- EN 14325 - Previously referenced for ignition resistance (clause amended)
Keywords: EN ISO 13982‑1, Type 5 protective clothing, solid particulates, chemical protective clothing, inward leakage, flame resistance, EN 13274‑4, ISO 13982‑2, PPE, personal protective equipment.
Frequently Asked Questions
EN ISO 13982-1:2004/A1:2010 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) - Amendment 1 (ISO 13982-1:2004/Amd 1:2010)". This standard covers: This part of ISO 13982 specifies the minimum requirements for chemical protective clothing resistant to penetration by airborne solid particles (type 5). These garments are full-body protective clothing, i.e. covering trunk, arms and legs, such as one-piece coveralls or two piece suits, with or without hood or visors, with or without foot protection. Requirements for component parts, such as hoods, gloves, boots, visors or respiratory protective equipment might be specified in other International and European Standards. This part of ISO 13982 is applicable only to airborne solid particulates. It is not applicable to other forms of challenge by solid chemicals, e.g. penetration of chemical dust through materials by rubbing or flexing, which may form the object of separate standards.
This part of ISO 13982 specifies the minimum requirements for chemical protective clothing resistant to penetration by airborne solid particles (type 5). These garments are full-body protective clothing, i.e. covering trunk, arms and legs, such as one-piece coveralls or two piece suits, with or without hood or visors, with or without foot protection. Requirements for component parts, such as hoods, gloves, boots, visors or respiratory protective equipment might be specified in other International and European Standards. This part of ISO 13982 is applicable only to airborne solid particulates. It is not applicable to other forms of challenge by solid chemicals, e.g. penetration of chemical dust through materials by rubbing or flexing, which may form the object of separate standards.
EN ISO 13982-1:2004/A1:2010 is classified under the following ICS (International Classification for Standards) categories: 13.340.10 - Protective clothing. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 13982-1:2004/A1:2010 has the following relationships with other standards: It is inter standard links to EN ISO 13982-1:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 13982-1:2004/A1:2010 is associated with the following European legislation: EU Directives/Regulations: 2016/425, 89/686/EEC; Standardization Mandates: M/031. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 13982-1:2004/A1:2010 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2011
9DURYDOQDREOHND]DYDURYDQMHSUHGWUGQLPLGHOFLGHO =DKWHYH]DYDURYDOQR
REOHNRNLYDUXMHSUHGNHPLNDOLMDPLLQ]DJRWDYOMD]DãþLWRFHOHJDWHOHVDSUHGWUGQLPL
GHOFLY]UDNX REODþLORWLSD 'RSROQLOR ,62 $0
Protective clothing for use against solid particulates - Part 1: Performance requirements
for chemical protective clothing providing protection to the full body against airborne solid
particulates (type 5 clothing) - Amendment 1 (ISO 13982-1:2004/AM 1:2010)
Schutzkleidung gegen feste Partikeln - Teil 1: Leistungsanforderungen an
Chemikalienschutzkleidung, die für den gesamten Körper einen Schutz gegen
luftgetragene feste Partikeln gewährt (Kleidung Typ 5) - Änderung 1 (ISO 13982-
1:2004/AM 1:2010)
Vêtements de protection à utiliser contre les particules solides - Partie 1: Exigences de
performance des vêtements de protection contre les produits chimiques offrant une
protection au corps entier contre les particules solides transportées par l'air (vêtements
de type 5) - Amendement 1 (ISO 13982-1:2004/AM 1:2010)
Ta slovenski standard je istoveten z: EN ISO 13982-1:2004/A1:2010
ICS:
13.340.10 Varovalna obleka Protective clothing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 13982-1:2004/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2010
ICS 13.340.10
English Version
Protective clothing for use against solid particulates - Part 1:
Performance requirements for chemical protective clothing
providing protection to the full body against airborne solid
particulates (type 5 clothing) - Amendment 1 (ISO 13982-
1:2004/AM 1:2010)
Vêtements de protection à utiliser contre les particules Schutzkleidung gegen feste Partikeln - Teil 1:
solides - Partie 1: Exigences de performance des Leistungsanforderungen an Chemikalienschutzkleidung, die
vêtements de protection contre les produits chimiques für den gesamten Körper einen Schutz gegen luftgetragene
offrant une protection au corps entier contre les particules feste Partikeln gewährt (Kleidung Typ 5) - Änderung 1 (ISO
solides transportées par l'air (vêtements de type 5) - 13982-1:2004/AM 1:2010)
Amendement 1 (ISO 13982-1:2004/AM 1:2010)
This amendment A1 modifies the European Standard EN ISO 13982-1:2004; it was approved by CEN on 14 October 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13982-1:2004/A1:2010: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA .4
Foreword
The document (EN ISO 13982-1:2004/A1:2010) has been prepared by Technical Committee CEN/TC 162
“Protective clothing including hand and arm protection and lifejackets” the secretariat of which is held by DIN,
in collaboration with ISO/TC 94 “Personal safety - Protective clothing and equipment”.
This Amendment to the European Standard EN ISO 13982:2004 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by April 2011, and
conflicting national standards shall be withdrawn at the latest by April 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 13982-1:2004/Amd 1:2010 has been approved by CEN as a EN ISO 13982-1:2004/A1:2010
without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 89/686/EEC
This European Standard has bee
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...