EN ISO 7233:1995
(Main)Rubber and plastics hoses and hose assemblies - Determination of suction resistance (ISO 7233:1991)
Rubber and plastics hoses and hose assemblies - Determination of suction resistance (ISO 7233:1991)
gives the guideline for methods for the protection of the user's privacy in consumer equipment and systems, both when the equipment or systems are in use and out of use.
Gummi- und Kunststoffschläuche und -schlauchleitungen - Bestimmung der Vakuumbeständigkeit (ISO 7233:1991)
Diese Internationale Norm spezifiziert zwei Verfahren zur Bestimmung der Vakuumbeständigkeit von Schläuchen, abhängig vom Innendurchmesser: Verfahren A: Für Schläuche mit einem Nenn-Innendurchmesser bis einschliesslich 80 mm; Verfahren B: Für Schläuche mit einem Nenn-Innendurchmesser über 80 mm.
Tuyaux et flexibles en caoutchouc et en plastique - Détermination de la résistance à l'aspiration (ISO 7233:1991)
Gumene in polimerne cevi ter cevni priključki - Ugotavljanje dotočne odpornosti (ISO 7233:1991)
General Information
- Status
- Withdrawn
- Publication Date
- 19-Feb-1995
- Withdrawal Date
- 22-Jan-2008
- Technical Committee
- CEN/TC 218 - Rubber and plastics hoses and hose assemblies
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 23-Jan-2008
- Completion Date
- 23-Jan-2008
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN ISO 7233:1995 is a standard published by the European Committee for Standardization (CEN). Its full title is "Rubber and plastics hoses and hose assemblies - Determination of suction resistance (ISO 7233:1991)". This standard covers: gives the guideline for methods for the protection of the user's privacy in consumer equipment and systems, both when the equipment or systems are in use and out of use.
gives the guideline for methods for the protection of the user's privacy in consumer equipment and systems, both when the equipment or systems are in use and out of use.
EN ISO 7233:1995 is classified under the following ICS (International Classification for Standards) categories: 23.040.70 - Hoses and hose assemblies. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 7233:1995 has the following relationships with other standards: It is inter standard links to EN ISO 7233:2008, EN ISO 6807:2003, EN 13482:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 7233:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2000
*XPHQHLQSROLPHUQHFHYLWHUFHYQLSULNOMXþNL8JRWDYOMDQMHGRWRþQHRGSRUQRVWL
,62
Rubber and plastics hoses and hose assemblies - Determination of suction resistance
(ISO 7233:1991)
Gummi- und Kunststoffschläuche und -schlauchleitungen - Bestimmung der
Vakuumbeständigkeit (ISO 7233:1991)
Tuyaux et flexibles en caoutchouc et en plastique - Détermination de la résistance a
l'aspiration (ISO 7233:1991)
Ta slovenski standard je istoveten z: EN ISO 7233:1995
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
INTERNATIONAL
Second edition
1991-12-01
Rubber and plastics hoses and hose
assemblies - Determination of suction
resistance
Tuyaux et flexibles en caoutchouc et en plastique - Determination de la
r&istance a I’aspiration
^p-I_------ --
--
Reference number
ISO 7233:1991(E)
--
_-___-___~-
-- --._-.-_.--. -.--.-
ISO 7233:1991(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards ado.pted by the technical committees are
circulated to the member bodies for voting. Publication as an Inter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard ISO 7233 was prepared by Technical Committee
ISO/TC 45, Rubber and rubber products, Sub-Committee SC 1, Hoses
(rubber and plastics).
This second edition cancels and replaces the first edition
(ISO 7233:1983), of which it constitutes a technical revision.
0 ISO 1991
All rights reserved. No part of this publication may be reproduced 01’ utilized in any form
or by any means, electronie or mechanical, including photocopying and microfilm, without
Permission in writing from the publisher.
International Orga nization for Standardiz ation
Case Postale 56 +
CH-1 21 1 Geneve 20 l Switzerland
Printed in Switzerland
ii
ISO 7233:1991(E)
Introduction
Suction testing is applied to hoses to determine that they will withstand
the differential pressure encountered in Service resulting from a re-
duced pressure within the hose. The degree of suction for the test will
be specified in the relevant product Standard.
. . .
Ill
This page intentionally left blank
INTERNATIONAL STANDARD ISO 7233:1991 (E)
Rubber and plastics hoses and hose assem
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...