EN 12697-34:2012
(Main)Bituminous mixtures - Test methods - Part 34: Marshall test
Bituminous mixtures - Test methods - Part 34: Marshall test
This document specifies a test method for determining the stability, flow and the Marshall quotient values of specimens of bituminous mixtures mixed according to EN 12697-35 and prepared using the impact compactor method of test EN 12697-30. It is limited to dense graded asphalt concrete and hot rolled asphalt.
Asphalt - Prüfverfahren - Teil 34: Marshall-Prüfung
Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung von Stabilität, Fließwert und Marshall-Quotient von Probekörpern aus nach EN 12697 35 gemischtem Asphalt, die mit einem Marshall-Verdichtungsgerät nach EN 12697 30 hergestellt wurden, fest. Das Prüfverfahren gilt nur für dichten Asphaltbeton und Hot-Rolled-Asphalt.
Mélanges bitumineux - Méthodes d'essai - Partie 34 : Essai Marshall
La présente Norme européenne spécifie une méthode d'essai pour déterminer la stabilité, le fluage et les valeurs du quotient Marshall des éprouvettes de mélanges bitumineux malaxés selon l'EN 12697-35 et compactés à l'aide d'un compacteur à impact selon l'EN 12697-30. Elle est limitée aux bétons bitumineux denses et aux « hot rolled asphalt ».
Bitumenske zmesi - Preskusne metode za vroče asfaltne zmesi - 34. del: Preskus po Marshallu
Ta evropski standard določa preskusno metodo za ugotavljanje stabilnosti, toka in vrednosti Marshallovega količnika preskušancev bitumenskih zmesi, pripravljenih v skladu s standardom EN 12697-35 in z uporabo metode udarnega zgoščevalnika pri preskusu iz standarda EN 12697-30. Omejen je na gosto penetrirani liti asfalt in vroče valjani asfalt.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Asphalt - Prüfverfahren für Heißasphalt - Teil 34: Marshall-PrüfungMélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 34 : Essai MarshallBituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12697-34:2012SIST EN 12697-34:2012en,fr,de01-september-2012SIST EN 12697-34:2012SLOVENSKI
STANDARDSIST EN 12697-34:2004+A1:20071DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12697-34
May 2012 ICS 93.080.20 Supersedes EN 12697-34:2004+A1:2007English Version
Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 34 : Essai Marshall
Asphalt - Prüfverfahren für Heißasphalt - Teil 34: Marshall-Prüfung This European Standard was approved by CEN on 30 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12697-34:2012: ESIST EN 12697-34:2012
Marshall stability and flow values . 11Annex B (normative)
Testing head . 12Bibliography . 13 SIST EN 12697-34:2012
EN 12697-1, Bituminous mixtures — Test methods for hot mix asphalt — Part 1: Soluble binder content EN 12697-2, Bituminous mixtures — Test method for hot mix asphalt — Part 2: Determination of particle size distribution EN 12697-3, Bituminous mixtures — Test methods for hot mix asphalt — Part 3: Bitumen recovery: Rotary evaporator EN 12697-4, Bituminous mixtures — Test methods for hot mix asphalt — Part 4: Bitumen recovery: Fractionating column EN 12697-5, Bituminous mixtures — Test methods for hot mix asphalt — Part 5: Determination of the maximum density SIST EN 12697-34:2012
1) In preparation. SIST EN 12697-34:2012
3.5 Marshall quotient ratio of the stability, S, to the flow, F, S/F Note 1 to entry: See Annex A. SIST
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.