EN 848-3:1999
(Main)Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerical control (NC) boring machines and routing machines
Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerical control (NC) boring machines and routing machines
This European Standard sets out the requirements and/or measures to remove the hazards and limit the risk on NC boring machines and NC routing machines (as defined in 3.1) herein after referred to as "machines" designed to cut solid wood, chip board, fibreboard, plywood and also these materials where these are covered with plastic laminate or edgings. This European standard covers all the hazards relevant to this machine which are listed in clause 4. This European standard does not cover the hazards related to Electromagnetic compatibility (EMC) as stated in the EMC directive 89/336 EEC dated 03.05.89. This European standard does not apply to NC, boring and routing machines with edge banding facilities. This standard is primarily directed to machines which are manufactured after the date of issue of this standard.
Sicherheit von Holzbearbeitungsmaschinen - Fräsmaschinen für einseitige Bearbeitung mit drehendem Werkzeug - Teil 3: NC-Bohr- und Fräsmaschinen
Diese Europäische Norm legt die Anforderungen und/oder Maßnahmen zur Beseitigung der Gefährdungen und zur Begrenzung der Risiken an NC-Bohrmaschinen und NC-Fräsmaschinen (wie in 3.1 definiert), nachfolgend als "Maschinen" bezeichnet, fest, die bestimmt sind zum Bearbeiten von Massivholz, Spanplatten, Faserplatten oder Sperrholz, sowie diesen Werkstoffen, wenn sie mit Kunststoffkanten und/oder Kunststoffbeschichtung versehen sind. Diese Norm behandelt die von der Maschine ausgehenden Gefährdungen wie in 4 aufgelistet.
Sécurité des machines pour le travail du bois - Machines à fraiser sur une face à outil rotatif - Partie 3: Perceuses et défonceuses à commande numérique
La présente norme européenne spécifie les exigences et/ou les mesures pour éliminer les phénomènes dangereux et limiter les risques sur les perceuses et les défonceuses à commande numérique (définies en 3.1.1) désignées ci-après sous le terme machines conçues pour usiner du bois, des panneaux de fibres ou de particules, de contre-plaqué ainsi que ces matériaux lorsque leurs surfaces ou leurs chants sont recouverts de plastique ou de plaquage. La présente norme européenne couvre tous les risques présentés par ces machines et dont la liste figure à l'article 4.
Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerical control (NC) boring machines and routing machines
General Information
- Status
- Withdrawn
- Publication Date
- 21-Sep-1999
- Withdrawal Date
- 27-Mar-2007
- Technical Committee
- CEN/TC 142 - Woodworking machines - Safety
- Drafting Committee
- CEN/TC 142/WG 5 - Spindle moulding, routing machines and machine centres
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 28-Mar-2007
- Completion Date
- 28-Mar-2007
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Gozdarski inštitut Slovenije
Slovenian Forestry Institute. Forest management certification support, timber testing.
Sponsored listings
Frequently Asked Questions
EN 848-3:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerical control (NC) boring machines and routing machines". This standard covers: This European Standard sets out the requirements and/or measures to remove the hazards and limit the risk on NC boring machines and NC routing machines (as defined in 3.1) herein after referred to as "machines" designed to cut solid wood, chip board, fibreboard, plywood and also these materials where these are covered with plastic laminate or edgings. This European standard covers all the hazards relevant to this machine which are listed in clause 4. This European standard does not cover the hazards related to Electromagnetic compatibility (EMC) as stated in the EMC directive 89/336 EEC dated 03.05.89. This European standard does not apply to NC, boring and routing machines with edge banding facilities. This standard is primarily directed to machines which are manufactured after the date of issue of this standard.
This European Standard sets out the requirements and/or measures to remove the hazards and limit the risk on NC boring machines and NC routing machines (as defined in 3.1) herein after referred to as "machines" designed to cut solid wood, chip board, fibreboard, plywood and also these materials where these are covered with plastic laminate or edgings. This European standard covers all the hazards relevant to this machine which are listed in clause 4. This European standard does not cover the hazards related to Electromagnetic compatibility (EMC) as stated in the EMC directive 89/336 EEC dated 03.05.89. This European standard does not apply to NC, boring and routing machines with edge banding facilities. This standard is primarily directed to machines which are manufactured after the date of issue of this standard.
EN 848-3:1999 is classified under the following ICS (International Classification for Standards) categories: 79.120.10 - Woodworking machines. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 848-3:1999 has the following relationships with other standards: It is inter standard links to EN 848-3:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 848-3:1999 is associated with the following European legislation: EU Directives/Regulations: 98/37/EC; Standardization Mandates: M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 848-3:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerical control (NC) boring machines and routing machinesSicherheit von Holzbearbeitungsmaschinen - Fräsmaschinen für einseitige Bearbeitung mit drehendem Werkzeug - Teil 3: NC-Bohr- und FräsmaschinenSécurité des machines pour le travail du bois - Machines a fraiser sur une face a outil rotatif - Partie 3: Perceuses et défonceuses a commande numériqueSafety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerical control (NC) boring machines and routing machines79.120.10Lesnoobdelovalni strojiWoodworking machines25.040.20Numerically controlled machinesICS:Ta slovenski standard je istoveten z:EN 848-3:1999SIST EN 848-3:2000en01-april-2000SIST EN 848-3:2000SLOVENSKI
STANDARD
SIST EN 848
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...