Personal eye protection - Goggles for motorcycle and moped users

This European Standard specifies requirements and test methods for goggles for use by all motorcycle and moped drivers and passengers, intended for eye-protection during the use of motorcycle and moped, both on the road and for off-road sport or leisure use, subject to the following exclusion. The goggles for official races and competitions are not included within the scope of this standard.

Persönlicher Augenschutz - Schutzbrillen für Motorrad- und Mopedfahrer

Die vorliegende Europäische Norm legt Anforderungen und Prüfverfahren für Schutzbrillen für alle Fahrer und Beifahrer von Motorrädern und Mopeds fest, die dazu gedacht sind, Augenschutz während der Verwendung von Motorrädern und Mopeds im Sport- und Freizeitbereich sowohl auf der Straße als auch im Gelände im Sport- und Freizeitbereich zu bieten. Davon ausgenommen sind Schutzbrillen, die von Motorrad- und Mopedfahrern bei offiziellen Rennen und Wettkämpfen getragen werden; diese unterliegen nicht der vorliegenden Norm.

Protection individuelle de l'oeil - Lunettes-masques pour motocyclistes et cyclomotoristes

La présente Norme européenne spécifie des exigences et des méthodes d’essai relatives aux lunettesmasques
utilisées par l’ensemble des conducteurs ou passagers de motocycles ou cyclomoteurs, destinées à
la protection de l’oeil au cours de l’utilisation des motocycles et des cyclomoteurs, tant sur route que pour la
pratique hors-route de sport ou de loisirs, sous réserve de l’exclusion suivante. Les lunettes-masques pour
des courses et compétitions officielles n’entrent pas dans le domaine d’application de la présente norme.

Osebno varovanje oči - Zaščitna očala za voznike motornih koles in mopedov

Ta evropski standard določa zahteve in preskusne metode za zaščitna očala za voznike motornih koles in mopedov, ki se uporabljajo na cesti in na terenu pri športu in v prostem času, z naslednjo izjemo. Področje uporabe tega standarda ne vključuje uporabe zaščitnih očal za uradne dirke in tekmovanja.

General Information

Status
Published
Publication Date
20-Jul-2010
Withdrawal Date
30-Jan-2011
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
03-Jun-2020
Completion Date
03-Jun-2020

Relations

Buy Standard

Standard
EN 1938:2010
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Persönlicher Augenschutz - Schutzbrillen für Motorrad- und MopedfahrerProtection individuelle de l'oeil - Lunettes-masques pour motocyclistes et cyclomotoristesPersonal eye protection - Goggles for motorcycle and moped users43.140Motorna kolesa in mopediMotor cycles and mopeds13.340.20Varovalna oprema za glavoHead protective equipmentICS:Ta slovenski standard je istoveten z:EN 1938:2010SIST EN 1938:2010en,fr,de01-oktober-2010SIST EN 1938:2010SLOVENSKI
STANDARDSIST EN 1938:19991DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1938
July 2010 ICS 13.340.20 Supersedes EN 1938:1998English Version
Personal eye protection - Goggles for motorcycle and moped users
Protection individuelle de l'oeil - Lunettes-masques pour motocyclistes et cyclomotoristes
Persönlicher Augenschutz - Schutzbrillen für Motorrad-und Mopedfahrer This European Standard was approved by CEN on 19 June 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1938:2010: ESIST EN 1938:2010

Photochromic sunglare oculars for use in twilight or at night . 18Annex B (normative)
Spectral functions for the calculation of luminous transmittance and relative visual attenuation coefficients (quotients) . 19Annex C (normative)
Spectral functions for the calculation of solar UV transmittance values . 21Annex D (normative)
Spectral function for the calculation of infrared transmittance . 23Annex E (normative)
Cut-on filter for UV filtering . 25Annex F (informative)
Impact resistance level
Use recommendations . 27Annex G (informative)
Uncertainty of measurement and results interpretation. 28SIST EN 1938:2010

Significant technical changes between this European Standard and the previous edition . 30Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC – Personal Protective Equipment . 32Bibliography . 34 SIST EN 1938:2010

EN 1836:2005+A1:2007 apply. 4 Requirements 4.1 General All the samples tested shall comply with the requirements of this European Standard. Goggles can be provided with different oculars. 4.2 Design and manufacture Goggles shall be free from projections, sharp edges or other defects which are likely to cause discomfort or injury during use. The verification of this requirement shall be made according to 5.11 and 5.12. 4.3 Materials Any materials (or combination of materials) may be used, provided they meet the requirements of this European Standard. SIST EN 1938:2010
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.