EN 1668:1997
(Main)Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels - Classification
Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels - Classification
This standard specifies requirements for classification of rods, wires and all-weld metal in the as-welded condition for tungsten inert gas welding of non alloy and fine grain steels with a minimum yield strength of up to 500 N/mm2 in the as-welded condition.
Schweißzustände - Stäbe, Drähte und Schweißgut zum Wolfram-Schutzgasschweißen von unlegierten Stählen und Feinkornstählen - Einteilung
Diese Norm legt Anforderungen für die Einleitung von Stäben, Drähten und reinem Schweißgut im Schweißzustand für das Wolfraum-Schutzgasschweißen von unlegierten Stählen und Feinkornstählen mit einer Mindeststreckgrenze bis zu 500 N/mm2 fest.
Produits consommables pour le soudage - Baguettes, fils d'apport et dépôts pour le soudage sous atmosphère inerte avec électrode réfractaire des aciers non alliés et des aciers à rains fins - Classification
La présente norme spécifie les prescriptions de classification des baguettes, fils d'apport et métaux déposés à l'état brut de soudage, pour le soudage à l'arc sous atmosphère inerte des aciers non alliés et des aciers à grains fins ayant une limite d'élasticité minimale inférieure à 500 N/mm2 à l'état brut de soudage.
Dodajni materiali za varjenje – Palice, žice in vari pri varjenju nelegiranih in drobno zrnatih jekel po TIG postopku
General Information
- Status
- Withdrawn
- Publication Date
- 19-Aug-1997
- Withdrawal Date
- 06-May-2008
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121/WG 3 - Welding consumables
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 07-May-2008
- Completion Date
- 07-May-2008
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 1668:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels - Classification". This standard covers: This standard specifies requirements for classification of rods, wires and all-weld metal in the as-welded condition for tungsten inert gas welding of non alloy and fine grain steels with a minimum yield strength of up to 500 N/mm2 in the as-welded condition.
This standard specifies requirements for classification of rods, wires and all-weld metal in the as-welded condition for tungsten inert gas welding of non alloy and fine grain steels with a minimum yield strength of up to 500 N/mm2 in the as-welded condition.
EN 1668:1997 is classified under the following ICS (International Classification for Standards) categories: 25.160.20 - Welding consumables. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1668:1997 has the following relationships with other standards: It is inter standard links to EN ISO 636:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1668:1997 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1668:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...