iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12311-1:1999

(Main)

Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties

Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties

This European Standard specifies a method for the determination of the tensile properties of bitumen sheets for roofing. The method is intended for the initial type testing and/or for quality control purposes.

Abdichtungsbahnen - Teil 1: Bitumenbahnen für Dachabdichtungen - Bestimmung des Zug-Dehnungsverhaltens

Diese Europäische Norm legt die Verfahren zur Bestimmung des Zug-Dehnungsverhaltens von Bitumen-Dachdichtungsbahnen fest.

Feuilles souples d'étanchéité - Partie 1: Feuilles d'étanchéité de toiture bitumineuses - Détermination des propriétés en traction

Cette Norme Européenne décrit une méthode pour la détermination des propriétés en traction des feuilles bitumineuses pour l'étanchéité de toitures.

Hidroizolacijski trakovi - 1. del: Bitumenski trakovi za tesnjenje streh - Določevanje nateznih lastnosti

General Information

Status
Published
Publication Date
21-Sep-1999
Withdrawal Date
29-Sep-2001
ICS
91.100.50 - Binders. Sealing materials
Technical Committee
CEN/TC 254 - Flexible sheets for water proofing
Drafting Committee
CEN/TC 254/SC 1/WG 1 - Mechanical characteristics
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
26-Jan-2024
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/102 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on membranes
M/107 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on geotextiles
M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
Ref Project
SIST EN 12311-1:2000 - Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties

Buy Standard

EN 12311-1:2000EN 12311-1:2000
PreviousNext
Standard
EN 12311-1:2000
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Abdichtungsbahnen - Teil 1: Bitumenbahnen für Dachabdichtungen - Bestimmung des Zug-DehnungsverhaltensFeuilles souples d'étanchéité - Partie 1: Feuilles d'étanchéité de toiture bitumineuses - Détermination des propriétés en tractionFlexible sheets for waterproofing - Part 1: Bitumen sheets for roo
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17388-2:2024(Main)
Flexible sheets for waterproofing - Environmental product declarations - Product category rules for reinforced bitumen, plastic and rubber flexible sheets for roof waterproofing - Part 2: Cradle to gate with options, modules C1-C4 and module D
SIST EN 17388-2:2025

This document provides product category rules (PCR) for the assessment of the environmental performance of reinforced bitumen, plastic and rubber flexible sheets for which the intended use is roof waterproofing.
NOTE   The reference product standards are EN 13707 and EN 13956.
This document is intended to be used for the development and issue of a cradle to gate with options, modules C1-C4 and module D EPD using specific data. This document includes requirements and rules to:
-   define the indicators to be declared and the way in which they are collected and reported;
-   describe which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages;
-   include the rules for calculating the life cycle inventory (LCI) and the life cycle impact assessment (LCIA) underlying an EPD, including the specification of the quality of the applied data.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17388-1:2024(Main)
Flexible sheets for waterproofing - Environmental product declarations - Product category rules for reinforced bitumen, plastic and rubber flexible sheets for roof waterproofing - Part 1: Cradle to grave and module D
SIST EN 17388-1:2024

This document provides product category rules (PCR) for the assessment of the environmental performance of reinforced bitumen, plastic and rubber flexible sheets for which the intended use is roof waterproofing.
NOTE   The reference product standards are EN 13707 and EN 13956.
This document is intended to be used for the development and issue of a cradle to grave and module D EPD using:
-   either generic data and system generic data;
or
-   specific data and system specific data.
This document includes requirements and rules to:
-   define the indicators to be declared and the way in which they are collected and reported;
-   describe which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages;
-   include the rules for calculating the life cycle inventory (LCI) and the life cycle impact assessment (LCIA) underlying an EPD, including the specification of the quality of the applied data;
-   define generic data and system generic data which are to be used for an EPD.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17048:2024(Main)
Flexible sheets for waterproofing - Plastic and rubber sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics
SIST-TS CEN/TS 17048:2024

This document specifies characteristics and performances of plastic and rubber sheets for waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles where the waterproofing is fully bonded to the concrete deck and fully bonded to the asphalt overlay.
This document does not cover concrete surfaces trafficable by vehicles where the waterproofing is not fully bonded to the concrete and/or not fully bonded to an overlay.
This document also states the test methods used for verifying the characteristics and gives rules for the assessment and verification of consistency of performance of the product.

  • Technical specification
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17872:2023(Main)
Flexible sheets for waterproofing - Underlays for discontinuous roof coverings - Artificial ageing procedure
SIST EN 17872:2024

This document specifies a procedure for artificial ageing of flexible underlays which are used under discontinuous roof coverings. This is achieved by exposing test samples to UV-radiation, elevated temperature in combination with high relative humidity and elevated temperature in combination with accelerated air-speed.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17873:2023(Main)
Flexible sheets for waterproofing - Underlays for discontinuous roof coverings and walls - Instructions for mounting and fixing for reaction to fire testing
SIST EN 17873:2024

This document specifies instructions for mounting and fixing for reaction to fire testing of factory-made underlays for discontinuous roof coverings and walls and contains provisions for direct and extended application rules.
These mounting and fixing procedures are not intended to be used for flat roofed waterproofing applications.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17986:2023(Main)
Flexible sheets for waterproofing - Extrapolation rules for testing results on resistance to root penetration
SIST-TS CEN/TS 17986:2024

Experience with testing in accordance with EN 13948 has shown that flexible sheets for waterproofing with different thicknesses, different colours, different formulations, different surface finishing, and different internal fabrics, amongst others, have passed the test successfully.
This document expresses the extrapolation rules of the results of root resistance testing in accordance with EN 13948 for roof waterproofing sheets manufactured in accordance with EN 13707:2004+A2:2009, and EN 13956:2012.
Experience with testing in accordance to EN 13948 has shown that the main critical points are represented by the joints. If joints are done in a proper way, it will avoid the penetration of roots during the test.

  • Technical specification
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13416:2023(Main)
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling
SIST EN 13416:2024

This document specifies the general rules how to select the samples of correctly stored and handled samples of uninstalled bitumen, plastic or rubber sheets for waterproofing. It also specifies the procedures to be followed before the test piece is cut from the sample.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17686:2022(Main)
Flexible sheets for waterproofing - Determination of the resistance to wind load of roof build-up system with bonded waterproofing systems
SIST EN 17686:2023

This document specifies the test method to determine the resistance to wind load of the roof build-up system with the waterproofing system bonded to the substrate.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17659:2021(Main)
Design guideline for mechanically fastened roof waterproofing systems
SIST-TS CEN/TS 17659:2022

This document gives guidance for the design of a roof waterproofing system mechanically fastened to the structural deck in relation to wind load resistance.
This document is intended to be used together with EN 16002 and the relevant clauses of EAD-030351-00-0402-2019.
This guideline does not include the seperate fastening requirements of the insulation boards, the securement to upstands, perimeter fastening, flashings or other roof details.

  • Technical specification
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16002:2018/AC:2021(Corrigendum)
Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing
SIST EN 16002:2019/AC:2022

TC origin: last two paragraphs replaced by new one in 8.4 and additional hyphen in Clause 12

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day