iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1348:1997

(Main)

Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives

Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives

This European Standard specifies the test method for the determination of the tensile adhesion strength of cementitious ceramic tile adhesives. This method applies to all cementitious adhesives and cementitious adhesives with separate components for internal and external ceramic tile installations on walls and floors. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles

Mörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Haftfestigkeit zementhaltiger Mörtel für innen und außen

Diese Europäische Norm beschreibt die Prüfmethode zur Beurteilung der Haftfestigkeit von zementhaltigen Mörteln. Diese Norm gilt für alle zementhaltigen Mörtel für die Verarbeitung keramischer Fliesen und Platten an Wand und Boden, für innen und aussen: zementhaltige Mörtel ohne und mit zusätzlichen Beimischungen. Diese Europäische Norm enthält keine Anforderungen und keine Empfehlungen für die Verarbeitung von keramischen Fliesen und Platten.

Colles à carrelage - Détermination de l'adhérence par traction des mortiers-colles

Cette norme européenne définit la méthode d'essai à utiliser pour évaluer l'adhérence par résistance à l'arrachement des mortiers-colles à base de liants hydrauliques. Elle s'applique à tous les mortiers-colles à carrelage pour les applications en murs ou en sols, et sur les ouvrages intérieurs ou extérieurs. Cette norme européenne ne concerne pas les spécifications et ne constitue pas des recommandations pour la conception ou l'installation de revêtements céramiques.

Lepila za ploščice - Ugotavljanje natezne adhezijske trdnosti cementnih lepil

General Information

Status
Withdrawn
Publication Date
18-Feb-1997
Withdrawal Date
28-Aug-2007
ICS
83.180 - Adhesives
91.100.10 - Cement. Gypsum. Lime. Mortar
Technical Committee
CEN/TC 67 - Ceramic tiles
Drafting Committee
CEN/TC 67/WG 3 - Adhesives and grouts for tiles
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
29-Aug-2007
Completion Date
29-Aug-2007
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/121 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on internal and external wall and ceiling finishes
M/127 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on construction adhesives
M/BC/CEN/92/22 - CPD: Internal finishes of walls & partitions.
Ref Project
SIST EN 1348:1998 - Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives

Relations

Amended By
EN 1348:1997/A1:1998 - Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives
Effective Date
22-Dec-2008
Replaced By
EN 1348:2007 - Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives
Effective Date
22-Dec-2008

Buy Standard

EN 1348:1998EN 1348:1998
PreviousNext
Standard
EN 1348:1998
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1348:1998
01-april-1998
HQWQLKOHSLO/HSLOD]DSORãþLFH8JRWDYOMDQMHQDWH]QHDGKH]LMVNHWUGQRVWLFHP
Adhesives for tiles - Determination of tensile adhesion strength for cementitious
adhesives
Mörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Haftfestigkeit
zementhaltiger Mörtel für innen und außen
Colles a carrelage - Détermination d
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12004-2:2017(Main)
Adhesives for ceramic tiles - Part 2: Test methods
SIST EN 12004-2:2017

This European Standard specifies the methods for determining characteristics for adhesives used in internal and external installation of ceramic tiles.
This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles.
The following test methods are described:
-   determination of open time (8.1);
-   determination of slip (8.2);
-   determination of tensile adhesion strength for cementitious adhesives (8.3);
-   determination of shear adhesion strength of dispersion adhesives (8.4);
-   determination of shear adhesion strength of reaction resin adhesives (8.5);
-   determination of transverse deformation of cementitious adhesives (8.6).
NOTE   Ceramic tile adhesives can be used also for other kinds of tiles (natural and agglomerated stones, etc.), if they do not adversely affect the stones.
WARNING - This European Standard can involve hazardous materials and operations. Persons using this standard should be familiar with normal laboratory practice. This European Standard does not purport to address all the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any European and national regulatory conditions.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12004-1:2017(Main)
Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of constancy of performance, classification and marking
SIST EN 12004-1:2017

This European Standard is applicable to the following three types of adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This European Standard gives the terminology concerning the products, working methods, application properties, etc, for ceramic tile adhesives.
This European Standard specifies the performance requirements for the adhesives for ceramic tiles.
It also specifies the appurtenant test methods, assessment and verification of constancy of performance (AVCP), as well as classification, designation and marking of adhesives for ceramic tiles.
This European Standard does not provide criteria or recommendations for the design and installation of ceramic tiles.
Ceramic tile adhesives may also be used for other types of tiles (natural and agglomerated stones, etc.), if they do not adversely affect these materials.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 12004-3(Main)
Adhesives for ceramic tiles - Part 3: Terminology, specifications, designation and marking
oSIST prEN 12004-3:2022

This document specifies the additional characteristics for the adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This document provides the terminology concerning the products, working methods, application properties, etc., for ceramic tile adhesives.
This document does not provide criteria or recommendations for the design and installation of ceramic tiles.
NOTE   Ceramic tile adhesives are also used for other types of tiles (natural and agglomerated stones, etc.), if they do not adversely affect these materials.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN 12004-1(Amendment)
Adhesives for ceramic tiles - Part 1: Essential characteristics and AVCP
kSIST FprEN 12004-1:2020

This document is applicable to the following three types of adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This document specifies the essential characteristics and the respective threshold levels of the adhesives for ceramic tiles.
It also specifies the appurtenant test methods and the assessment and verification of constancy of performance (AVCP).
NOTE   This document does not provide criteria or recommendations for the design and installation of ceramic tiles.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12004-2:2017(Main)
Adhesives for ceramic tiles - Part 2: Test methods
SIST EN 12004-2:2017

This European Standard specifies the methods for determining characteristics for adhesives used in internal and external installation of ceramic tiles.
This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles.
The following test methods are described:
-   determination of open time (8.1);
-   determination of slip (8.2);
-   determination of tensile adhesion strength for cementitious adhesives (8.3);
-   determination of shear adhesion strength of dispersion adhesives (8.4);
-   determination of shear adhesion strength of reaction resin adhesives (8.5);
-   determination of transverse deformation of cementitious adhesives (8.6).
NOTE   Ceramic tile adhesives can be used also for other kinds of tiles (natural and agglomerated stones, etc.), if they do not adversely affect the stones.
WARNING - This European Standard can involve hazardous materials and operations. Persons using this standard should be familiar with normal laboratory practice. This European Standard does not purport to address all the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any European and national regulatory conditions.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12004-1:2017(Main)
Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of constancy of performance, classification and marking
SIST EN 12004-1:2017

This European Standard is applicable to the following three types of adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This European Standard gives the terminology concerning the products, working methods, application properties, etc, for ceramic tile adhesives.
This European Standard specifies the performance requirements for the adhesives for ceramic tiles.
It also specifies the appurtenant test methods, assessment and verification of constancy of performance (AVCP), as well as classification, designation and marking of adhesives for ceramic tiles.
This European Standard does not provide criteria or recommendations for the design and installation of ceramic tiles.
Ceramic tile adhesives may also be used for other types of tiles (natural and agglomerated stones, etc.), if they do not adversely affect these materials.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 12004-3(Main)
Adhesives for ceramic tiles - Part 3: Terminology, specifications, designation and marking
oSIST prEN 12004-3:2022

This document specifies the additional characteristics for the adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This document provides the terminology concerning the products, working methods, application properties, etc., for ceramic tile adhesives.
This document does not provide criteria or recommendations for the design and installation of ceramic tiles.
NOTE   Ceramic tile adhesives are also used for other types of tiles (natural and agglomerated stones, etc.), if they do not adversely affect these materials.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN 12004-1(Amendment)
Adhesives for ceramic tiles - Part 1: Essential characteristics and AVCP
kSIST FprEN 12004-1:2020

This document is applicable to the following three types of adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This document specifies the essential characteristics and the respective threshold levels of the adhesives for ceramic tiles.
It also specifies the appurtenant test methods and the assessment and verification of constancy of performance (AVCP).
NOTE   This document does not provide criteria or recommendations for the design and installation of ceramic tiles.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52924:2023(Main)
Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM 52924:2023)
SIST EN ISO/ASTM 52924:2023

This document establishes the required or the achievable classes of part properties for additive manufactured polymer parts in order to get a common understanding on part quality. It is aimed at providers of manufacturing services for polymer parts who use additive manufacturing machines and at the customers for these services. Designers of parts as well as buyers and providers of manufacturing services can specify, in a traceable manner, the required or the achievable level of part properties with the aid of this document. The classification is based on mechanical, physical and geometrical properties. Further properties can be defined between buyer and provider of manufacturing.
This document is applicable to parts that have been manufactured from a thermoplastic polymer by means of thermal reaction fusion of material typically applied by a powder bed fusion (PBF) or material extrusion (MEX) processes. This document is also applicable to thermoplastic parts made by other processes, provided that due consideration is given to process-specific topics.
The classification of part properties applies to parts in as-built condition, that have been unpacked from the build space, with all support structures removed, but prior to any post-processing operations.
Specific industries (e.g. aerospace and medical) typically specify additional requirements.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11363-1:2018/A1:2023(Amendment)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
SIST EN ISO 11363-1:2018/A1:2023
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day