Fans - Efficiency classification for fans (ISO 12759:2010, including Amd 1:2013)

ISO 12759:2010 specifies requirements for classification of fan efficiency for all fan types driven by motors with an electrical input power range from 0,125 kW to 500 kW. It is applicable to (bare shaft and driven) fans, as well as fans integrated into products. Fans integrated into products are measured as stand-alone fans.
It is not applicable to fans for smoke and emergency smoke extraction; fans for industrial processes; fans for automotive application, trains, planes, etc.; fans for potentially explosive atmospheres; box fans, powered roof ventilators and air curtains or jet fans for use in car parks and tunnel ventilation.

Ventilatoren - Effizienzklassifizierung für Ventilatoren (ISO 12759:2010, einschließlich Amd 1:2013)

Diese Internationale Norm legt Anforderungen für die Klassifizierung von Wirkungsgraden für alle motorbetriebenen Ventilatortypen mit einer elektrischen Eingangsleistung im Bereich von 0,125 kW bis 500 kW fest. Diese Internationale Norm ist anwendbar auf Ventilatoren mit freiliegender Welle und angetriebene Ventilatoren, sowie produktintegrierte Ventilatoren. Produktintegrierte Ventilatoren werden als eigenständige (stand-alone) Ventilatoren behandelt.
Diese Internationale Norm gilt nicht für:
a)   Brandgas  und Entrauchungsventilatoren;
b)   Ventilatoren für industrielle Verfahren;
c)   Ventilatoren für die Anwendung in Fahrzeugen, Zügen und Flugzeugen;
d)   Ventilatoren für den Einsatz in explosionsgefährdeten Bereichen;
e)   Kastenventilatoren, Dachventilatoren und Luftschleiergeräte;
f)   Strahlventilatoren für den Einsatz in Parkhäusern und zur Tunnelbelüftung.

Ventilateurs - Classification du rendement des ventilateurs (ISO 12759:2010, y compris Amd 1:2013)

L'ISO 12759:2010 établit une classification du rendement de tous les types de ventilateurs entraînés par des moteurs dont la puissance électrique absorbée est comprise entre 0,125 kW et 500 kW. Elle est applicable aux ventilateurs à arbre nu et à entraînement, ainsi qu'aux ventilateurs intégrés à des produits. Ces derniers sont mesurés en tant que ventilateurs autonomes.
Elle n'est pas applicable aux ventilateurs utilisés pour l'extraction des fumées et le désenfumage; aux ventilateurs pour les procédés industriels; aux ventilateurs pour les applications automobiles, les trains, les avions, etc.; aux ventilateurs placés en atmosphères potentiellement explosives; aux ventilateurs en caisson, aux tourelles d'extraction motorisées, aux rideaux d'air; ni aux ventilateurs utilisés dans les parkings et pour la ventilation des tunnels.

Ventilatorji - Klasifikacija učinkovitosti za ventilatorje (ISO 12759:2010, vključuje dopolnilo A1:2013)

Ta mednarodni standard določa klasifikacijo učinkovitosti za ventilatorje za vse vrste ventilatorjev z motorji z razponom električne vhodne moči od 0,125 kW do 500 kW. Ta mednarodni standard se uporablja za ventilatorje z golo gredjo in pogonom ter ventilatorje, vgrajene v izdelke. Ventilatorji, vgrajeni v izdelke, se merijo kot samostojni ventilatorji.
Ta evropski standard ne velja za:
a) ventilatorje za dim in odstranjevanje plina v izrednih razmerah;
b) ventilatorje za industrijske procese;
c) ventilatorje za avtomobilsko uporabo, vlake in letala;
d) ventilatorje za potencialno eksplozivne atmosfere;
e) ventilatorje v pravokotnem ohišju, napajane strešne ventilatorje in zračne zavese;
f) potisne ventilatorje za uporabo na avtomobilskih parkiriščih in za prezračevanje v predorih.

General Information

Status
Withdrawn
Publication Date
21-Jul-2015
Withdrawal Date
26-Nov-2019
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
27-Nov-2019

Relations

Buy Standard

Standard
EN ISO 12759:2015
English language
54 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2015
9HQWLODWRUML.ODVLILNDFLMDXþLQNRYLWRVWL]DYHQWLODWRUMH ,62YNOMXþXMH
GRSROQLOR$
Fans - Efficiency classification for fans (ISO 12759:2010, including Amd 1:2013)
Ventilatoren - Effizienzklassifizierung für Ventilatoren (ISO 12759:2010, einschließlich
Amd 1:2013)
Ventilateurs - Classification du rendement des ventilateurs (ISO 12759:2010, y compris
Amd 1:2013)
Ta slovenski standard je istoveten z: EN ISO 12759:2015
ICS:
23.120 =UDþQLNL9HWUQLNL.OLPDWVNH Ventilators. Fans. Air-
QDSUDYH conditioners
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 12759
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2015
ICS 23.120
English Version
Fans - Efficiency classification for fans (ISO 12759:2010,
including Amd 1:2013)
Ventilateurs - Classification du rendement des ventilateurs Ventilatoren - Effizienzklassifizierung für Ventilatoren (ISO
(ISO 12759:2010, y compris Amd 1:2013) 12759:2010, einschließlich Amd 1:2013)
This European Standard was approved by CEN on 16 July 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12759:2015 E
worldwide for CEN national Members.

Contents Page
European foreword .3

European foreword
The text of ISO 12759:2010, including Amd 1:2013, has been prepared by Technical Committee ISO/TC 117
“Fans” of the International Organization for Standardization (ISO) and has been taken over as EN ISO
12759:2015 by Technical Committee CEN/TC 156 “Ventilation for buildings” the secretariat of which is held by
BSI
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2016, and conflicting national standards shall be withdrawn at
the latest by January 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 12759:2010, including Amd 1:2013, has been approved by CEN as EN ISO 12759:2015
without any modification.
INTERNATIONAL ISO
STANDARD 12759
First edition
2010-12-15
Fans — Efficiency classification for fans
Ventilateurs — Classification du rendement des ventilateurs

Reference number
ISO 12759:2010(E)
©
ISO 2010
ISO 12759:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved

ISO 12759:2010(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms and definitions .1
3.1 Fans — General .2
3.2 Fan or test installation categories according to the arrangement of ducting .3
3.3 Fans — Definitions relating to calculations.3
3.4 Definitions relating to fan efficiency .5
3.5 Fan efficiency grades.6
4 Symbols and units.6
5 Fan installation, efficiency and tolerance.7
5.1 General .7
5.2 Use of installation categories .9
5.3 Calculation of efficiency .9
5.4 Tolerances.10
6 Ratings.10
6.1 General .10
6.2 Bare shaft fans.10
6.3 Driven fans .13
Annex A (normative) Energy efficiency grades for bare shaft fans .20
Annex B (normative) Calculation method to determine efficiency of component parts.21
Annex C (informative) Variation of fan performance between installation categories.26
Annex D (informative) Input power calculation for driven fans at design point.27
Annex E (informative) Selection of fans for best efficiency .35
Annex F (informative) Determination of efficiency grade for a driven fan.38
Annex G (informative) Explanatory note .40
Bibliography.42

ISO 12759:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12759 was prepared by Technical Committee ISO/TC 117, Fans.
iv © ISO 2010 – All rights reserved

ISO 12759:2010(E)
Introduction
The last decade has seen not only an escalation in the price, but also an increasing recognition of the finite life
of many of the fossil fuels in use. There is also a belief that climatic change is due to an increase in the levels
of carbon dioxide in the atmosphere. This has lead to many nations reviewing methods of energy generation
and usage.
Therefore, there is a need to promote energy efficiency in order to maintain economic growth. This requires
better selection of equipment by users and better design of this equipment by manufacturers.
Fans of all types are used for ventilation and air conditioning, process engineering (drying, pneumatic
conveying), combustion air supply and agriculture, etc. Indeed, the energy usage by fans has been calculated
as nearly 20 % of worldwide demand.
The fan industry is of a global nature, with a considerable degree of exporting and licensing. To ensure that
defined fan performance characteristics are common throughout the world, a series of International Standards
has been developed. It is the belief of the industry that there is a need for the recognition of minimum
efficiency standards. To encourage their implementation, a classification system is proposed which
incorporates a series of efficiency bands. With improvements in technology and manufacturing processes, the
minimum efficiency levels can be reviewed and increased over time.
This International Standard can be used by legislators or regulatory bodies for defining future energy saving
targets.
INTERNATIONAL STANDARD ISO 12759:2010(E)

Fans — Efficiency classification for fans
1 Scope
This International Standard establishes a classification of fan efficiency for all fan types driven by motors with
an electrical input power range from 0,125 kW to 500 kW. This International Standard is applicable to bare
shaft and driven fans, as well as fans integrated into products. Fans integrated into products are measured as
stand-alone fans.
This International Standard is not applicable to:
a) fans for smoke and emergency smoke extraction;
b) fans for industrial processes;
c) fans for automotive application, trains and planes;
d) fans for potentially explosive atmospheres;
e) box fans, powered roof ventilators and air curtains;
f) jet fans for use in car parks and tunn
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.