EN 1676:2010
(Main)Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
This European Standard defines the requirements for grades of alloyed aluminium ingots intended for remelting.
It specifies the classifications and designations applicable to these grades, the conditions in which they are produced, their properties and the marks by which they are identified.
Aluminium and Aluminiumlegierungen - Legiertes Aluminium in Masseln - Spezifikationen
Diese Europäische Norm legt die Anforderungen an die Sorten von legiertem Aluminium in Masseln fest, die zum Wiedereinschmelzen bestimmt sind.
Sie legt die Klassifizierungen und Bezeichnungen dieser Sorten, die Herstellungsbedingungen, die Eigenschaften sowie die Kennzeichnung zur Identifizierung fest.
Aluminium et alliages d'aluminium - Lingots pour refusion en aluminium allié - Spécifications
La présente Norme européenne définit les exigences pour les nuances de lingots d'alliages d'aluminium destinés à la refusion.
Elle spécifie la classification et la désignation applicables à ces nuances, leurs conditions de production, leurs propriétés et leurs marques d'identification.
Aluminij in aluminijeve zlitine - Legirani bloki za pretaljevanje - Specifikacije
Ta evropski standard opredeljuje zahteve za razrede legiranih aluminijevih blokov za pretaljevanje. Določa razvrščanje in označevanje, ki veljata za te razrede, pogoje proizvodnje, njihove lastnosti in oznake za prepoznavanje.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminij in aluminijeve zlitine - Legirani bloki za pretaljevanje - SpecifikacijeAluminium and Aluminiumlegierungen - Legiertes Aluminium in Masseln - SpezifikationenAluminium et alliages d'aluminium - Lingots pour refusion en aluminium allié - SpécificationsAluminium and aluminium alloys - Alloyed ingots for remelting - Specifications77.150.10Aluminijski izdelkiAluminium productsICS:Ta slovenski standard je istoveten z:EN 1676:2010SIST EN 1676:2010en,fr,de01-maj-2010SIST EN 1676:2010SLOVENSKI
STANDARDSIST EN 1676:19981DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1676
March 2010 ICS 77.150.10 Supersedes EN 1676:1996English Version
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
Aluminium et alliages d'aluminium - Lingots pour refusion en aluminium allié - Spécifications
Aluminium and Aluminiumlegierungen - Legiertes Aluminium in Masseln - Spezifikationen This European Standard was approved by CEN on 6 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1676:2010: ESIST EN 1676:2010
e Aluminium
Numerical Chemical symbols
Each Total
AlCu EN AB-21000 EN AB-Al Cu4MgTi 0,15 (0,20) 0,30 (0,35) 4,2 to 5,0 0,10 0,20 to 0,35 (0,15 to 0,35) - 0,05 0,10 0,05 0,05 0,15 to 0,25 (0,15 to 0,30) 0,03 0,10 Remainder
EN AB-21100 EN AB-Al Cu4Ti 0,15 (0,18) 0,15 (0,19) 4,2 to 5,2 0,55 - - - 0,07 - - 0,15 to 0,25 (0,15 to 0,30) 0,03 0,10 Remainder
EN AB-21200 EN AB-Al Cu4MnMg 0,10 0,15 (0,20) 4,0 to 5,0 0,20 to 0,50 0,20 to 0,50 (0,15 to 0,50) - 0,03 (0,05) 0,05 (0,10) 0,03 0,03 0,05 (0,10) 0,03 0,10 Remainder AlSiMgTi EN AB-41000 EN AB-Al Si2MgTi 1,6 to 2,4 0,50 (0,60) 0,08 (0,10) 0,30 to 0,50 0,50 to 0,65 (0,45 to 0,65) - 0,05 0,10 0,05 0,05 0,07 to 0,15 (0,05 to 0,20) 0,05 0,15 Remainder AlSi7Mg EN AB-42000 EN AB-Al Si7Mg 6,5 to 7,5 0,45 (0,55) 0,15 (0,20) 0,35 0,25 to 0,65 (0,20 to 0,65) - 0,15 0,15 0,15 0,05 0,20f (0,25) 0,05 0,15 Remainder
EN AB-42100 EN AB-Al Si7Mg0,3 6,5 to 7,5 0,15 (0,19) 0,03 (0,05) 0,10 0,30 to 0,45 (0,25 to 0,45) - - 0,07 - - 0,18f (0,25) 0,03 0,10 Remainder
EN AB-42200 EN AB-Al Si7Mg0,6 6,5 to 7,5 0,15 (0,19) 0,03 (0,05) 0,10 0,50 to 0,70 (0,45 to 0,70) - - 0,07 - - 0,18f (0,25) 0,03 0,10 Remainder AlSi10Mg EN AB-43000 EN AB-Al Si10Mg(a) 9,0 to 11,0 0,40 (0,55) 0,03 (0,05) 0,45 0,25 to 0,45 (0,20 to 0,45) - 0,05 0,10 0,05 0,05 0,15 0,05 0,15 Remainder
EN AB-43100 EN AB-Al Si10Mg(b) 9,0 t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.