EN ISO 12821:2015

SLOVENSKI STANDARD
01-julij-2015
1DGRPHãþD
SIST EN 14634:2010
Steklena embalaža - Kronsko grlo 26 H 180 - Mere (ISO 12821:2013)
Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2013)
Verpackungen aus Glas - Kronenmundstück 26 H 180 - Maße (ISO 12821:2013)
Emballage de verre - Bague couronne 26 H 180 - Dimensions (ISO 12821:2013)
Ta slovenski standard je istoveten z: EN ISO 12821:2015
ICS:
55.100 Steklenice. Lonci. Kozarci Bottles. Pots. Jars
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 12821
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2015
ICS 55.100 Supersedes EN 14634:2010
English Version
Glass packaging - 26 H 180 crown finish - Dimensions (ISO
12821:2013)
Emballage de verre - Bague couronne 26 H 180 - Verpackungen aus Glas - Kronenmundstück 26 H 180 -
Dimensions (ISO 12821:2013) Maße (ISO 12821:2013)
This European Standard was approved by CEN on 30 April 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12821:2015 E
worldwide for CEN national Members.

Contents Page
Foreword .3
Foreword
The text of ISO 12821:2013 has been prepared by Technical Committee ISO/TC 63 “Glass Containers” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 12821:2015 by
Technical Committee CEN/TC 261 “Packaging” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2015, and conflicting national standards shall be withdrawn
at the latest by November 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14634:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 12821:2013 has been approved by CEN as EN ISO 12821:2015 without any modification.
INTERNATIONAL ISO
STANDARD 12821
First edition
2013-09-15
Glass packaging — 26 H 180 crown
finish — Dimensions
Emballage de verre — Bague couronne 26 H 180 — Dimensions
Reference number
ISO 12821:2013(E)
©
ISO 2013
ISO 12821:2013(E)
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

ISO 12821:2013(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Dimensions . 1
Bibliography .
...