EN 10003-2:1994
(Main)Metallic materials - Brinell hardness test - Part 2: Verification of Brinell hardness testing machines
Metallic materials - Brinell hardness test - Part 2: Verification of Brinell hardness testing machines
This Draft European Standard specifies a method for the verification of testing machines used for determining Brinell hardness in accordance with EN 10003-1. It describes a direct verification method for checking the main functions of the machine, and an indirect verification method suitable for the overall checking of the machine. If a testing machine is also to be used for other methods of hardness testing, it shall be verified independently for each method.
Metallische Werkstoffe - Härteprüfung nach Brinell - Teil 2: Prüfung von Härteprüfmaschinen nach Brinell
In dieser Europäischen Norm ist das Verfahren für die Prüfung von Härteprüfmaschinen zur Bestimmung der Brinellhärte nach EN 10003-1 festgelegt. In dieser Norm ist ein direktes Prüfverfahren zur Prüfung von Hauptfunktionen der Härteprüfmaschine und ein indirektes Prüfverfahren, das für die Ermittlung der Gesamtabweichung der Härteprüfmaschine geeinet ist, festgelegt. Wird eine Härteprüfmaschine auch für andere Härteprüfverfahren verwendet, muss sie unabhängig für jedes Verfahren geprüft werden.
Matériaux métalliques - Essai de dureté Brinell - Partie 2: Vérification des machines d'essai de dureté Brinell
Le présent projet de norme européenne définit une méthode de vérification des machines d'essai utilisée pour la détermination de la dureté Brinell conformément à l'EN 10003-1. Il décrit une méthode de vérification directe des principales fonctions de la machine, et une méthode de vérification indirecte permettant une vérification globale de la machine. Si une machine doit être également utilisée pour d'autres méthodes d'essai de dureté, elle doit être verifiée indépendamment pour chacune de ces méthodes.
Kovinski materiali - Preskus trdote po Brinellu - 2. del: Preverjanje merilnikov trdote po Brinellu
General Information
- Status
- Withdrawn
- Publication Date
- 24-Oct-1994
- Withdrawal Date
- 31-Aug-1999
- Technical Committee
- ECISS/TC 101 - Test methods for steel (other than chemical analysis)
- Drafting Committee
- ECISS/TC 1/SC 1 - Mechanical testing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Sep-1999
- Completion Date
- 01-Sep-1999
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10003-2:1994 is a standard published by the European Committee for Standardization (CEN). Its full title is "Metallic materials - Brinell hardness test - Part 2: Verification of Brinell hardness testing machines". This standard covers: This Draft European Standard specifies a method for the verification of testing machines used for determining Brinell hardness in accordance with EN 10003-1. It describes a direct verification method for checking the main functions of the machine, and an indirect verification method suitable for the overall checking of the machine. If a testing machine is also to be used for other methods of hardness testing, it shall be verified independently for each method.
This Draft European Standard specifies a method for the verification of testing machines used for determining Brinell hardness in accordance with EN 10003-1. It describes a direct verification method for checking the main functions of the machine, and an indirect verification method suitable for the overall checking of the machine. If a testing machine is also to be used for other methods of hardness testing, it shall be verified independently for each method.
EN 10003-2:1994 is classified under the following ICS (International Classification for Standards) categories: 77.040.10 - Mechanical testing of metals. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10003-2:1994 has the following relationships with other standards: It is inter standard links to EN ISO 6506-2:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10003-2:1994 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kovinski materiali - Preskus trdote po Brinellu - 2. del: Preverjanje merilnikov trdote po BrinelluMetallische Werkstoffe - Härteprüfung nach Brinell - Teil 2: Prüfung von Härteprüfmaschinen nach BrinellMatériaux métalliques - Essai de dureté Brinell - Partie 2: Vérification des machines d'essai de dureté BrinellMetallic materials - Brinell hardness test - Part 2: Ver
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...