prEN 6049-007

SLOVENSKI STANDARD
01-julij-2025
Aeronavtika - Električni kabli, namestitev - Zaščitna obojka iz meta-aramidnih
vlaken - 007. del: Samoovojna mehanska in električna zaščitna obojka, fleksibilna,
z možnostjo poznejše montaže, obratovalna temperatura od –55 °C do 260 °C -
Standard za izdelek
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres
- Part 007: Self-wrapping mechanical and electrical protective sleeve, flexible post
installation operating temperature from -55 °C to 260 °C - Product standard
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-
Aramidfasern - Teil 007: Selbstverschließender mechanischer und elektrischer
Schutzschlauch, flexibel, nachträglich montierbar, Temperaturbereich −55 °C bis 260 °C
- Produktnorm
Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-
aramides - Partie 007 : Gaine de protection mécanique et électrique auto-fermable,
souple après montage température d’utilisation -55 °C à 260 °C - Norme de produit
Ta slovenski standard je istoveten z: prEN 6049-007
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2025
ICS 49.060 Will supersede EN 6049-007:2012
English Version
Aerospace series - Electrical cables, installation -
Protection sleeve in meta-aramid fibres - Part 007: Self-
wrapping mechanical and electrical protective sleeve,
flexible post installation operating temperature from -55
°C to 260 °C - Product standard
Série aérospatiale - Câbles électriques, installation - Luft- und Raumfahrt - Elektrische Leitungen,
Gaine de protection en fibres méta-aramides - Partie Installation - Schutzschläuche aus Meta-Aramidfasern -
007 : Gaine de protection mécanique et électrique Teil 007: Selbstverschließender, mechanischer und
auto-fermable, souple après montage température elektrischer Schutzschlauch, flexibel, nachträglich
d'utilisation -55 °C à 260 °C - Norme de produit montierbar Temperaturbereich -55 °C bis 260 °C -
Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 6049-007:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Required characteristics . 5
4.1 Composition . 5
4.2 Dimensions and mass of the sleeve . 5
4.3 Colour and materials . 7
4.3.1 Colour . 7
4.3.2 Materials . 7
4.4 Temperature range . 7
5 Test methods . 7
6 Quality assurance . 9
7 Designation . 9
8 Marking . 9
9 Technical specification . 9
Bibliography . 10

European foreword
This document (prEN 6049-007:2025) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 6049-007:2012.
EN 6049-007:2012:
— Editorial improvements and introducing new size 03 in Table 1 for weight and optimized fit envelop
integration.
1 Scope
This document specifies the characteristics of post installation flexible self-wrapping protection sleeves
for electrical cable and cable bundles made from meta-aramid fibres and provided with a water
repellent protection for aerospace application. This self-wrapping protection sleeve can be also used as
an electrical protection under specified conditions. (115 VAC/400 Hz, 15 A max. per conductor — as per
test EN 6059-502).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2825, Aerospace series - Burning behaviour of non metallic materials under the influence of radiating
heat and flames - Determination of sm
...