ASTM D5248-04(2020)

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: D5248 −04 (Reapproved 2020)
Standard Specification for
Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
This standard is issued under the fixed designation D5248; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope D2111 Test Methods for Specific Gravity and Density of
Halogenated Organic Solvents and Their Admixtures
1.1 This specification covers the three grades of 1,1,2-
2 D3401 Test Methods for Water in Halogenated Organic
trichloro 1,2,2-trifluoroethane typically needed in various
Solvents and Their Admixtures
industries. It may be used as a reference document by purchas-
D3443 Test Method for Chloride in Trichlorotrifluoroethane
ers or by persons establishing in-house, 1,1,2-trichloro 1,2,2-
D3444 Test Method for Total Acid Number of Trichlorotri-
trifluoroethane recovery programs.
fluoroethane
1.2 This international standard was developed in accor-
D3741 Test Methods for Appearance of Admixtures Con-
dance with internationally recognized principles on standard-
taining Halogenated Organic Solvents
ization established in the Decision on Principles for the
D6806 Practice for Analysis of Halogenated Organic Sol-
Development of International Standards, Guides and Recom-
vents and Their Admixtures by Gas Chromatography
mendations issued by the World Trade Organization Technical
Barriers to Trade (TBT) Committee.
3. Classification
2. Referenced Documents
3.1 Type I—Generally recognized for use in precision ap-
plications.
2.1 ASTM Standards:
D1064 Test Methods for Iron in Rosin Tall Oil Fatty Acids
3.2 Type II—Use for less demanding precision applications.
and Other Related Products (Withdrawn 2002)
3.3 Type III—General-purpose technical grade.
D2108 Test Method for Color of Halogenated Organic
Solvents and Their Admixtures (Platinum-Cobalt Scale)
4. Properties
D2109 Test Methods for Nonvolatile Matter in Halogenated
Organic Solvents and Their Admixtures
4.1 Reclaimed 1,1,2-trichloro 1,2,2-trifluoroethane Type I
shall meet the requirements prescribed in Table 1.
This specification is under the jurisdiction of ASTM Committee D26 on
4.2 Reclaimed 1,1,2-trichloro 1,2,2-trifluoroethane Type II
Halogenated Organic Solvents and Fire Extinguishing Agents and is the direct
shall meet the requirements prescribed in Table 2.
responsibility of Subcommittee D26.02 on Vapor Degreasing.
Current edition approved April 1, 2020. Published April 2020. Originally
4.3 Reclaimed 1,1,2-trichloro 1,2,2-trifluoroethane Type III
approved in 1992. Last previous edition approved in 2015 as D5248–04(2015).
DOI: 10.1520/D5248–04R20.
shall meet the requirements prescribed in Table 3.
1,1,2-trichloro 1,2,2-trifluoroethane: CAS No. 76-13-1.
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
5. Keywords
contact ASTM Customer Service at service
...