ASTM B265-06

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: B 265 – 06
Standard Specification for
1
Titanium and Titanium Alloy Strip, Sheet, and Plate
This standard is issued under the fixed designation B 265; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope 1.1.17 Grade 19—Titanium alloy (3 % aluminum, 8 %
2 vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),
1.1 This specification covers annealed titanium and tita-
1.1.18 Grade 20—Titanium alloy (3 % aluminum, 8 %
nium alloy strip, sheet, and plate as follows:
vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum)
1.1.1 Grade 1—Unalloyed titanium,
plus 0.04 % to 0.08 % palladium,
1.1.2 Grade 2—Unalloyed titanium,
1.1.19 Grade 21—Titanium alloy (15 % molybdenum, 3 %
1.1.3 Grade 3—Unalloyed titanium,
aluminum, 2.7 % niobium, 0.25 % silicon),
1.1.4 Grade 4—Unalloyed titanium,
1.1.20 Grade 23—Titanium alloy (6 % aluminum, 4 %
1.1.5 Grade 5—Titanium alloy (6 % aluminum, 4 % vana-
vanadium with extra low interstitial elements, ELI),
dium),
1.1.21 Grade 24—Titanium alloy (6 % aluminum, 4 %
1.1.6 Grade 6—Titanium alloy (5 % aluminum, 2.5 % tin),
vanadium) plus 0.04 % to 0.08 % palladium,
1.1.7 Grade 7—Unalloyed titanium plus 0.12 to 0.25 %
1.1.22 Grade 25—Titanium alloy (6 % aluminum, 4 %
palladium,
vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 %
1.1.8 Grade 9—Titanium alloy (3.0 % aluminum, 2.5 %
palladium,
vanadium),
1.1.23 Grade 26—Unalloyed titanium plus 0.08 to 0.14 %
1.1.9 Grade 11—Unalloyed titanium plus 0.12 to 0.25 %
ruthenium,
palladium,
1.1.24 Grade 27—Unalloyed titanium plus 0.08 to 0.14 %
1.1.10 Grade 12—Titanium alloy (0.3 % molybdenum,
ruthenium,
0.8 % nickel),
1.1.25 Grade 28—Titanium alloy (3 % aluminum, 2.5 %
1.1.11 Grade 13—Titanium alloy (0.5 % nickel, 0.05 %
vanadium) plus 0.08 to 0.14 % ruthenium,
ruthenium),
1.1.26 Grade 29—Titanium alloy (6 % aluminum, 4 %
1.1.12 Grade 14—Titanium alloy (0.5 % nickel, 0.05 %
vanadiumwithextralowinterstitialelements,ELI)plus0.08to
ruthenium),
0.14 % ruthenium,
1.1.13 Grade 15—Titanium alloy (0.5 % nickel, 0.05 %
1.1.27 Grade 30—Titanium alloy (0.3 % cobalt, 0.05 %
ruthenium),
palladium),
1.1.14 Grade 16—Unalloyed titanium plus 0.04 to 0.08 %
1.1.28 Grade 31—Titanium alloy (0.3 % cobalt, 0.05 %
palladium,
palladium),
1.1.15 Grade 17—Unalloyed titanium plus 0.04 to 0.08 %
1.1.29 Grade 32—Titanium alloy (5 % aluminum, 1 % tin,
palladium,
1 % zirconium, 1 % vanadium, 0.8 % molybdenum),
1.1.16 Grade 18—Titanium alloy (3 % aluminum, 2.5 %
1.1.30 Grade 33—Titanium alloy (0.4 % nickel, 0.015 %
vanadium) plus 0.04 to 0.08 % palladium.
palladium, 0.02 5 % ruthenium, 0.15 % chromium),
1.1.31 Grade 34—Titanium alloy (0.4 % nickel, 0.015 %
1
This specification is under the jurisdiction of ASTM Committee B10 on
palladium, 0.025 % ruthenium, 0.15 % chromium),
Reactive and Refractory Metals and Alloys and is the direct responsibility of
1.1.32 Grade 35—Titanium alloy (4.5 % aluminum, 2 %
Subcommittee B10.01 on Titanium.
Current edition approved April 1, 2006. Published May 2006. Originally molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon),
e1
approved in 1952. Last previous edition approved in 2005 as B 265 – 05 .
1.1.33 Grade 36—Titanium alloy (45 % niobium),
2
For ASME Boiler and Pressure Vessel Code applications see related Specifi-
1.1.34 Grade 37—Titanium alloy (1.5 % aluminum), and
cations SB-265 in Section II of that Code.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
B265–06
A
TABLE 1 Tensile Requirements
B
Tensile Strength, min Yield Strength, 0.2 % Offset Bend Test
Elongation in
min max Under 0.070 in. 0.070 to 0.187 in.
Grade 2 in. or 50 mm,
ksi MPa (1.8 mm) in (1.8–4.75 mm) in
min, %
ksi MPa ksi MPa
Thickness Thickness
1 35 240 20 138 45 310 24 3T 4T
2 50 345 40 275 65 450 20 4T 5T
3 65 450 55 380 80 550 18 4T 5T
4 80 550 70 483 95 655 15 5T 6T
C
5 130 895 120 828 . . 10 9T 10T
C
6 120 828 115 793 . . 10 8T 9T
7 50 345 40 275 65 450 20 4T 5T
D
9 90 620 70 483 . . 15 5T 6T
11 35 240 20 138 45 310 24 3T 4T
12 70 483 50 345 . . 18 4T 5T
13 40 275 25 170 . . 24 3T 4T
14 60 410 40 275 . . 20 4T 5T
15 70 483 55 380 . . 18 4T 5T
16 50 345 40 275 65 450 20 4T 5T
17 35 240 20 138 45 310 24 3T 4T
D
18 90 620 70 483 . . 15 5T 6T
E,F
19 115 793 110 759 . . 15 6T 6T
E,F
20 115 793 110 759 . . 15 6T 6T
E,F
21 115 793 110 759 . . 15 6T 6T
E,F
23 120 828 110 759 . . 10 9T 10T
24 130 8
...