ASTM A377-18(2022)e1
(Specification)Standard Index of Specifications for Ductile Iron Pressure Pipe
Standard Index of Specifications for Ductile Iron Pressure Pipe
SCOPE
1.1 This index identifies specifications that cover ductile iron pressure pipe suitable for carrying water and other liquids under pressure.
Note 1: The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
- Status
- Published
- Publication Date
- 30-Sep-2022
- Technical Committee
- A04 - Iron Castings
- Drafting Committee
- A04.12 - Pipes and Tubes
Overview
ASTM A377-18(2022)e1 - Standard Index of Specifications for Ductile Iron Pressure Pipe provides a comprehensive reference for specifications covering ductile iron pressure pipe used for transporting water and other pressurized liquids. Developed by ASTM International, this index identifies relevant standards that support the safe, efficient, and consistent application of ductile iron pipe materials and components in water distribution systems and other pressurized liquid conveyance.
The document aligns with internationally recognized principles of standardization, as established by the World Trade Organization Technical Barriers to Trade (TBT) Committee. It is intended as a practical resource for manufacturers, purchasers, engineers, and specifying authorities seeking guidance on the applicable norms for ductile iron pressure pipe products.
Key Topics
- Identification of Applicable Standards: The index lists key American National Standards (ANSI/AWWA) relevant to ductile iron pressure pipe and associated fittings, coatings, and installation practices.
- Specification Referencing: Emphasizes the necessity of specifying the precise ANSI/AWWA standard in contracts and procurement documents to ensure compliance with project requirements.
- Scope of Application: Focuses on ductile iron pipe systems designed for water and other liquids under pressure, covering requirements related to trench conditions, internal working pressures, and system integrity.
- Supporting Documentation: Highlights the collaborative development of standards between ASTM, AWWA, and other industry associations, ensuring wide applicability and industry acceptance.
Applications
Ductile iron pressure pipe plays a critical role in modern infrastructure projects due to its strength, durability, and corrosion resistance. The ASTM A377-18(2022)e1 index is widely used in the following applications:
- Municipal Water Distribution: Ensuring reliable and safe delivery of potable water.
- Industrial Liquid Transmission: Managing pressurized flow of various liquids in industrial settings.
- Irrigation and Agricultural Systems: Supporting efficient transport of water in agricultural projects.
- Fire Protection Systems: Providing robust pipelines for fire suppression water lines.
- Sewage and Wastewater Infrastructure: Handling pressurized conveyance of effluent and process water in wastewater treatment plants.
By referencing the appropriate specification identified in this standard index, stakeholders ensure that ductile iron pipe installations meet rigorous quality, performance, and safety criteria, as recognized by leading industry bodies.
Related Standards
The ASTM A377-18(2022)e1 index references several key American National Standards for ductile iron pressure pipe and fittings, all of which collectively support the design, installation, and performance of these systems:
- ANSI/AWWA C104/A21.4 - Cement-Mortar Lining for Ductile-Iron Pipe and Fittings
- ANSI/AWWA C105/A21.5 - Polyethylene Encasement for Ductile-Iron Pipe Systems
- ANSI/AWWA C150/A21.50 - Thickness Design of Ductile-Iron Pipe
- ANSI/AWWA C110/A21.10 - Ductile-Iron and Gray-Iron Fittings
- ANSI/AWWA C111/A21.11 - Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
- ANSI/AWWA C115/A21.15 - Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron Threaded Flanges
- ANSI/AWWA C116/A21.16 - Protective Fusion-Bonded Coatings for Interior and Exterior Surfaces
- ANSI/AWWA C153/A21.53 - Ductile Iron Compact Fittings
- ANSI/AWWA C600 - Installation of Ductile-Iron Mains and Appurtenances
- ANSI/AWWA C606 - Grooved and Shouldered Joints
These standards, developed in collaboration with the American Water Works Association (AWWA), provide the detailed requirements and guidance necessary to assure quality, interoperability, and safety in ductile iron pressure pipe installations across diverse applications.
For engineers, specifiers, and procurement specialists, referencing ASTM A377-18(2022)e1 ensures that projects benefit from industry best practices and proven standards for ductile iron pipe systems.
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
ASTM A377-18(2022)e1 is a technical specification published by ASTM International. Its full title is "Standard Index of Specifications for Ductile Iron Pressure Pipe". This standard covers: SCOPE 1.1 This index identifies specifications that cover ductile iron pressure pipe suitable for carrying water and other liquids under pressure. Note 1: The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
SCOPE 1.1 This index identifies specifications that cover ductile iron pressure pipe suitable for carrying water and other liquids under pressure. Note 1: The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM A377-18(2022)e1 is classified under the following ICS (International Classification for Standards) categories: 23.040.10 - Iron and steel pipes. The ICS classification helps identify the subject area and facilitates finding related standards.
ASTM A377-18(2022)e1 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
´1
Designation: A377 −18 (Reapproved 2022)
Standard Index of Specifications for
Ductile Iron Pressure Pipe
This standard is issued under the fixed designation A377; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
ε NOTE—3.2 was updated editorially in October 2022.
1. Scope 3.2 Other American National Standards relating to ductile-
iron pipe are the following:
1.1 This index identifies specifications that cover ductile
ANSI/AWWA C104/A21.4, Cement-Mortar Lining for
iron pressure pipe suitable for carrying water and other liquids
2,3
Ductile-Iron Pipe and Fittings
under pressure.
ANSI/AWWA C105/A21.5, Polyethylene Encasement for
NOTE 1—The text of this standard references notes and footnotes which
2,3
Ductile-Iron Pipe Systems
provide explanatory material. These notes and footnotes (excluding those
in tables and figures) shall not be considered as requirements of the ANSI/AWWA C150/A21.50, Thickness Design of Ductile-
2,3
standard.
Iron Pipe
1.2 This international standard was developed in accor-
ANSI/AWWA C110/A21.10, Ductile-Iron and Gray-Iron
2,3
dance with internationally recognized principles on standard-
Fittings
ization established in the Decision on Principles for the
ANSI/AWWA C111/A21.11, Rubber-Gasket Joints for
Development of International Standards, Guides and Recom- 2,3
Ductile-Iron Pressure Pipe and Fittings
mendations issued by the World Trade Organization Technical
ANSI/AWWAC115/A21.15, Flanged Ductile-Iron Pipe with
Barriers to Trade (TBT) Committee.
2,3
Ductile-Iron or Gray-Iron Threaded Flanges
2. Method of Designation ANSI/AWWA C116/A21.16, Protective Fusion-Bonded
Coatings for the Interior and Exterior Surfaces of Ductile-Iron
2.1 The ASTM designation for these specifications is not
2,3
and Gray-Iron Fittings
sufficient to describe the particular items a purchaser may
ANSI/AWWA C153/A21.53, Ductile Iron Compact
desire; therefore, the ANSI designation for the applicable
2,3
Fittings
American National Standards shown in Section 3 shall be
specified in the inquiry, contract, and order. ANSI/AWWA C600, Installation of Ductile-Iron Mains and
2,3
Their Appurtenances
3. Reference Specifications
2,3
ANSI/AWWA C606, Grooved and Shouldered Joints
3.1 Ductile iron pipe furnished in accordance with this
NOTE 2—These specifications were prepared by appropriate subcom-
index are covered by the following American National Stan-
mittees ofAmerican Water WorksAssociation CommitteeA21 on Ductile
dards:
Iron Pipe and Fittings. This committee was originally organized as an
ANSI/AWWA C151/A21.51, Ductil
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...