T-316 -

This EN specifies the technical requirements to be met by terminal equipment capable of connecting to a public telecommunications network and that support the HSCSD feature. These requirements apply to terminals for Phase 2+ of the public land mobile radio service, operating in the 900 MHz band with a channel separation of 200 kHz, utilising constant envelope modulation and carrying traffic channels according to the Time Division Multiple Access (TDMA) principle. This EN specifies the terminal equipment HSCSD requirements for the GSM900 version of the Global System for Mobile communications (GSM). For each test purpose and its corresponding conformance requirement, a reference is given to the test method in EN 300 607-1 (GSM11.10-1)[2]. The requirements apply at the air interface and the Subscriber Identity Module - Mobile Equipment interface for the access requirements, which may be stimulated to perform the tests by additional equipment if necessary. The measurement uncertainty is described in EN 300 607-1 (GSM11.10-1)[2]. This EN covers the essential requirements of the Terminal Directive 91/263/EEC[1] Articles 4d, 4e, 4f.  The Terminal Directive 91/263/EEC[1] Articles 4a and 4b are covered by other directives, and, therefore, not by this EN. In this EN, there are no Electromagnetic Compatibility technical requirements in terms of the Terminal Directive 91/263/EEC[1], Article 4c. NOTE 1:Technical Requirements for EMC performance and testing of the equipment are covered by the relevant standards applicable to the EMC Directive 89/336/EEC, annexA. This module specifies the HSCSD Terminal equipment additional requirements.  EN 300 607-1 (GSM11.10-1)[2] constitutes the conformance test suite for GSM. The verification of the conformance requirements in this EN is based on the tests described in this reference. The set of requirements in EN 300 607-1 (GSM11.10-1)[2] and the set of requirements in this EN need not be identical. All the requirements in this EN are specif

Merged EN 301 432 and EN 301 420 (GSM 13.02 parts 1 and 2) GSM 900 and 1800

This Technical Basis for Regulation (TBR) specifies the technical requ irements to be met by terminal equipment capable of connecting to a pu blic telecommunications network. These requirements apply to terminals for Phase 2 of the public land mobile radio service, operating in -   the DCS 1 800 band; or -   both in the DCS 1 800 band and the GSM 900 MHz band. with a channel separation of 200 kHz, utilizing constant envelope modu lation and carrying traffic channels according to the Time Division Mu ltiple Access (TDMA) principle. This TBR specifies the access requirements for terminals as stated abo ve implementing the GSM standard. For each test purpose and its corresponding conformance requirement, a reference is given to the test method in ETS 300 607-1 (GSM 11.10-1) [2]. The requirements apply at the air interface and the Subscriber Id entity Module - Mobile Equipment interface for the access requirements , which may be stimulated to perform the tests by additional equipment if necessary. The measurement uncertainty is described in ETS 300 607-1 (GSM 11.10-1 ) [2]. This TBR covers the essential requirements of the Terminal Directive 9 1/263/EEC [1] Articles 4d, 4e, 4f. Non access related aspects of speec h telephony, where Article 4g has been applied, are covered by TBR 32. The Terminal Directive 91/263/EEC [1] Articles 4a and 4b are covered b y other directives, and, therefore, not by this TBR. In this TBR, there are no Electromagnetic Compatibility technical requ irements in terms of the Terminal Directive 91/263/EEC [1], Article 4c . NOTE:   Technical Requirements for EMC performance and testing of the eq uipment are covered by the relevant standards applicable to the EMC Di rective 89/336/EEC, annex A. Terminal equipment may be subject Co additional requirements in other Common Technical Regulations (CTR) depending on the equipments functio nality. ETS 300 607-1 (GSM 11.10-1) [2] constitutes the conformance test suite referenced by this TBR. The verification of t

This Technical Basis for Regulation (TBR) specifies the technical requ irements to be met by terminal equipment capable of connecting to a pu blic telecommunications network. These requirements apply to terminals for Phase 2 of the public land mobile radio service, operating in: -   the DCS 1 800 band; or -   both in the DCS 1 800 band and the GSM 900 MHz band. with a channel separation of 200 kHz, utilizing constant envelope modu lation and carrying traffic channels according to the Time Division Mu ltiple Access (TDMA) principle. This TBR specifies the access requirements for terminals as stated abo ve implementing the GSM standard. For each test purpose and its corresponding conformance requirement, a reference is given to ETS 300 607-1 (GSM 11.10-1) [2]. The requiremen ts apply to speech transmission. The measurement uncertainty is handled, as described in ETS 300 607-1 (GSM 11.10) [2]. This TBR covers the essential requirements of the Terminal Directive 9 1/263/EEC [1] Article 4g. Articles 4d, 4e, and 4f are covered by TBR 3 1. The Terminal Directive 91/263/EEC Articles 4a and 4b are covered by ot her directives, and, therefore, not by this TBR. In this TBR, there are no Electromagnetic Compatibility technical requ irements in terms of the Terminal Directive 91/263/EEC, Article 4c. NOTE:   Technical Requirements for EMC performance and testing of the eq uipment are covered by the relevant standards applicable to the EMC Di rective 89/336/EEC, annex A. Terminal equipment may be subject to additional requirements in other Common Technical Regulations (CTR) depending on the equipments functio nality. ETS 300 607-1 (GSM 11.10) [2] constitutes the conformance test suite r eferenced by this TBR. The verification of the conformance requirement s mn this TBR is based on the tests described in this reference. The s et of requirements in ETS 300 607-1 (GSM 11.10) [2] and the set of req uirements in this TBR need not be identical. Some requirements only apply to specific types

This Technical Basis for Regulation (TBR) specifies the technical requ irements to be met by terminal equipment capable of connecting to a pu blic telecommunications network. These requirements apply to terminals for Phase 2 of the public land mobile radio service, operating in -   the DCS 1 800 band; or -   both in the DCS 1 800 band and the GSM 900 MHz band. with a channel separation of 200 kHz, utilizing constant envelope modu lation and carrying traffic channels according to the Time Division Mu ltiple Access (TDMA) principle. This TBR specifies the access requirements for terminals as stated abo ve implementing the GSM standard. For each test purpose and its corresponding conformance requirement, a reference is given to the test method in ETS 300 607-1 (GSM 11.10-1) [2]. The requirements apply at the air interface and the Subscriber Id entity Module - Mobile Equipment interface for the access requirements , which may be stimulated to perform the tests by additional equipment if necessary. The measurement uncertainty is described in ETS 300 607-1 (GSM 11.10-1 ) [2]. This TBR covers the essential requirements of the Terminal Directive 9 1/263/EEC [1] Articles 4d, 4e, 4f. Non access related aspects of speec h telephony, where Article 4g has been applied, are covered by TBR 32. The Terminal Directive 91/263/EEC [1] Articles 4a and 4b are covered b y other directives, and, therefore, not by this TBR. In this TBR, there are no Electromagnetic Compatibility technical requ irements in terms of the Terminal Directive 91/263/EEC [1], Article 4c . NOTE:   Technical Requirements for EMC performance and testing of the eq uipment are covered by the relevant standards applicable to the EMC Di rective 89/336/EEC, annex A. Terminal equipment may be subject Co additional requirements in other Common Technical Regulations (CTR) depending on the equipments functio nality. ETS 300 607-1 (GSM 11.10-1) [2] constitutes the conformance test suite referenced by this TBR. The verification of t

This Technical Basis for Regulation (TBR) specifies the technical requ irements to be met by terminal equipment capable of connecting to a pu blic telecommunications network. These requirements apply to terminals for Phase 2 of the public land mobile radio service, operating in: -   the DCS 1 800 band; or -   both in the DCS 1 800 band and the GSM 900 MHz band. with a channel separation of 200 kHz, utilizing constant envelope modu lation and carrying traffic channels according to the Time Division Mu ltiple Access (TDMA) principle. This TBR specifies the access requirements for terminals as stated abo ve implementing the GSM standard. For each test purpose and its corresponding conformance requirement, a reference is given to ETS 300 607-1 (GSM 11.10-1) [2]. The requiremen ts apply to speech transmission. The measurement uncertainty is handled, as described in ETS 300 607-1 (GSM 11.10) [2]. This TBR covers the essential requirements of the Terminal Directive 9 1/263/EEC [1] Article 4g. Articles 4d, 4e, and 4f are covered by TBR 3 1. The Terminal Directive 91/263/EEC Articles 4a and 4b are covered by ot her directives, and, therefore, not by this TBR. In this TBR, there are no Electromagnetic Compatibility technical requ irements in terms of the Terminal Directive 91/263/EEC, Article 4c. NOTE:   Technical Requirements for EMC performance and testing of the eq uipment are covered by the relevant standards applicable to the EMC Di rective 89/336/EEC, annex A. Terminal equipment may be subject to additional requirements in other Common Technical Regulations (CTR) depending on the equipments functio nality. ETS 300 607-1 (GSM 11.10) [2] constitutes the conformance test suite r eferenced by this TBR. The verification of the conformance requirement s mn this TBR is based on the tests described in this reference. The s et of requirements in ETS 300 607-1 (GSM 11.10) [2] and the set of req uirements in this TBR need not be identical. Some requirements only apply to specific types

Merged TS 101 431 and TS 101 419-1 (GSM 13.01 parts 1 and 2) GSM 900 and 1800

This EN specifies the technical requirements to be met by terminal equipment capable of connecting to a public telecommunications network and that support the ASCI feature. These requirements apply to terminals for Phase 2+ of the public land mobile radio service, operating in the 900 MHz band with a channel separation of 200 kHz, utilising constant envelope modulation and carrying traffic channels according to the Time Division Multiple Access (TDMA) principle. This EN specifies the terminal equipment ASCI requirements for the GSM900 version of the Global System for Mobile communications (GSM). For each test purpose and its corresponding conformance requirement, a reference is given to the test method in EN 300 607-1 (GSM11.10-1)[2]. The requirements apply at the air interface and the Subscriber Identity Module - Mobile Equipment interface for the access requirements, which may be stimulated to perform the tests by additional equipment if necessary. The measurement uncertainty is described in EN 300 607-1 (GSM11.10-1)[2]. This EN covers the essential requirements of the Terminal Directive 91/263/EEC[1] Articles 4d, 4e, 4f.  The Terminal Directive 91/263/EEC[1] Articles 4a and 4b are covered by other directives, and, therefore, not by this EN. In this EN, there are no Electromagnetic Compatibility technical requirements in terms of the Terminal Directive 91/263/EEC[1], Article 4c. NOTE 1:Technical Requirements for EMC performance and testing of the equipment are covered by the relevant standards applicable to the EMC Directive 89/336/EEC, annexA. This module specifies the ASCI Terminal equipment additional requirements.  EN 300 607-1 (GSM11.10-1)[2] constitutes the conformance test suite for GSM. The verification of the conformance requirements in this EN is based on the tests described in this reference. The set of requirements in EN 300 607-1 (GSM11.10-1)[2] and the set of requirements in this EN need not be identical. All the requirements in this EN are specific

Merged TS 101 431 and TS 101 419-1 (GSM 13.01 parts 1 and 2) GSM 900 and 1800

This EN specifies the technical requirements to be met by terminal equipment capable of connecting to a public telecommunications network and that support the HSCSD feature. These requirements apply to terminals for Phase 2+ of the public land mobile radio service, operating in the 900 MHz band with a channel separation of 200 kHz, utilising constant envelope modulation and carrying traffic channels according to the Time Division Multiple Access (TDMA) principle. This EN specifies the terminal equipment HSCSD requirements for the GSM900 version of the Global System for Mobile communications (GSM). For each test purpose and its corresponding conformance requirement, a reference is given to the test method in EN 300 607-1 (GSM11.10-1)[2]. The requirements apply at the air interface and the Subscriber Identity Module - Mobile Equipment interface for the access requirements, which may be stimulated to perform the tests by additional equipment if necessary. The measurement uncertainty is described in EN 300 607-1 (GSM11.10-1)[2]. This EN covers the essential requirements of the Terminal Directive 91/263/EEC[1] Articles 4d, 4e, 4f.  The Terminal Directive 91/263/EEC[1] Articles 4a and 4b are covered by other directives, and, therefore, not by this EN. In this EN, there are no Electromagnetic Compatibility technical requirements in terms of the Terminal Directive 91/263/EEC[1], Article 4c. NOTE 1:Technical Requirements for EMC performance and testing of the equipment are covered by the relevant standards applicable to the EMC Directive 89/336/EEC, annexA. This module specifies the HSCSD Terminal equipment additional requirements.  EN 300 607-1 (GSM11.10-1)[2] constitutes the conformance test suite for GSM. The verification of the conformance requirements in this EN is based on the tests described in this reference. The set of requirements in EN 300 607-1 (GSM11.10-1)[2] and the set of requirements in this EN need not be identical. All the requirements in this EN are specif

REN/SMG-071301PR1

DEN/SMG-071301P

RTBR/SMG-0731TTCNR1

DEN/SMG-071334Q

REN/SMG-071334QR1

DEN/SMG-071368Q

DEN/SMG-071302P

RTBR/SMG-0732TTCNR

DTBR/SMG-0732TTCN

DTBR/SMG-0731TTCN