M/380 - Revision of EN 13683:2003
Standardisation mandate given to the European Committee for standardisation (CEN) under EC Directive 98/37/EC relating to Machinery with a view to revision of Standard EN 13683:2003 "Garden equipment - Integrally powered shredders/chippers - Safety"
General Information
This European Standard specifies safety requirements and their verification for the design and
construction of hand fed, shredders/chippers with integral power source and with or without vacuum assisted collection which are designed primarily to reduce organic material to smaller pieces. It is only applicable to shredders/chippers that are designed for use outdoors in a stationary position by an operator standing on the ground. #This standard applies to shredders/chippers with feed intake openings or segments, in this standard referred to as feed safety openings and being of any shape complying with the safety distance requirements of this standard with regard to contact with the cutting means, that in total will fit into a square of 250 mm 250 mm measured at the plane of the opening(s).
This standard describes methods of elimination or reduction of hazards arising from the use of
shredders/chippers. In addition it specifies the type of information to be provided by the manufacturer on safe working practices.
This standard does not cover requirements for:
units driven by an external power source;
mobile use of units which can be used in both stationary and mobile modes;
units with powered discharge intended to broadcast material or load vehicles;
units with separate mechanically powered feed intake or attachments;
units with cutting means of either one or more non-metallic filaments, or one or more non-metallic cutting elements pivotally mounted on a generally circular central drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting means of less than 10 J;
electrical powered and battery-powered shredders/chippers.
Environmental hazards and EMC have not been considered in this standard.
This standard deals with all significant hazards, hazardous situations and events relevant to
shredders/chippers, when they are used as intended (see clause 4).
This document is not applicable to shredders/chippers which are manufactured before the date of
publication of this document by CEN.
- Corrigendum2 pagesEnglish languagesale 10% offe-Library read for1 day
CEN/TC 144 Corrigendum - Editorial modification to 5.2.1.3.
- Corrigendum2 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies safety requirements and their verification for the design and
construction of hand fed, shredders/chippers with integral power source and with or without vacuum assisted collection which are designed primarily to reduce organic material to smaller pieces. It is only applicable to shredders/chippers that are designed for use outdoors in a stationary position by an operator standing on the ground. #This standard applies to shredders/chippers with feed intake openings or segments, in this standard referred to as feed safety openings and being of any shape complying with the safety distance requirements of this standard with regard to contact with the cutting means, that in total will fit into a square of 250 mm 250 mm measured at the plane of the opening(s).
This standard describes methods of elimination or reduction of hazards arising from the use of
shredders/chippers. In addition it specifies the type of information to be provided by the manufacturer on safe working practices.
This standard does not cover requirements for:
units driven by an external power source;
mobile use of units which can be used in both stationary and mobile modes;
units with powered discharge intended to broadcast material or load vehicles;
units with separate mechanically powered feed intake or attachments;
units with cutting means of either one or more non-metallic filaments, or one or more non-metallic cutting elements pivotally mounted on a generally circular central drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting means of less than 10 J;
electrical powered and battery-powered shredders/chippers.
Environmental hazards and EMC have not been considered in this standard.
This standard deals with all significant hazards, hazardous situations and events relevant to
shredders/chippers, when they are used as intended (see clause 4).
This document is not applicable to shredders/chippers which are manufactured before the date of
publication of this document by CEN.
- Standard62 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies safety requirements and their verification for the design and construction of hand fed, shredders/chippers with integral power source and with or without vacuum assisted collection which are designed primarily to reduce organic material to smaller pieces. It is only applicable to shredders/chippers that are designed for use outdoors in a stationary position by an operator standing on the ground. This standard applies to shredders/chippers with feed intake openings or segments, in this standard referred to as feed safety openings and being of any shape complying with the safety distance requirements of this standard with regard to contact with the cutting means, that in total will fit into a square of 250 mm x 250 mm measured at the plane of the opening(s).
This standard describes methods of elimination or reduction of hazards arising from the use of shredders/chippers. In addition it specifies the type of information to be provided by the manufacturer on safe working practices.
This standard does not cover requirements for:
- units driven by an external power source;
- mobile use of units which can be used in both stationary and mobile modes;
- units with powered discharge intended to broadcast material or load vehicles;
- units with separate mechanically powered feed intake or attachments;
- units with cutting means of either one or more non-metallic filaments, or one or more non-metallic cutting elements pivotally mounted on a generally circular central drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting means of less than 10 J;
- electrical powered and battery-powered shredders/chippers.
Environmental hazards and EMC have not been considered in this standard.
This standard deals with all significant hazards, hazardous situations and events relevant to shredders/chippers, when they are used as intended (see clause 4).
This document is
- Standard62 pagesEnglish languagesale 10% offe-Library read for1 day
This amendment refers to changes in 5.2.1 "Feed safety openings", 5.2.2 "Discharge chutes", 5.2.3.1 "Attachment", D.2.3 (9) and new Annex A "Examples of inlet openings where the safety distance is ? 200 mm".
- Amendment8 pagesEnglish languagesale 10% offe-Library read for1 day
This amendment refers to changes in 5.2.1 "Feed safety openings", 5.2.2 "Discharge chutes", 5.2.3.1 "Attachment", D.2.3 (9) and new Annex A "Examples of inlet openings where the safety distance is >= 200 mm".
Text of mother standard:
This European Standard specifies safety requirements and their verification for the design and construction of hand fed, shredders/chippers with integral power source and with or without vacuum assisted collection which are designed primarily to reduce organic material to smaller pieces. It is only applicable to shredders/chippers that are designed for use outdoors in a stationary position by an operator standing on the ground. It applies to shredders/chippers with feed intake openings in the form of a single opening or an opening divided into a number of segments. The feed intake openings or segments each being of any shape that will fit into a square of 250 mm - 250 mm measured at the relevant safety distance to the cutting means.
NOTE Feed safety openings are limited to 250 mm - 250 mm but the total feed intake opening can be any size.
This standard describes methods of elimination or reduction of hazards arising from the use of shredders/chippers. In addition it specifies the type of information to be provided by the manufacturer on safe working practices.
This standard does not cover requirements for:
- units driven by an external power source;
- mobile use of units which can be used in both stationary and mobile modes;
- units with powered discharge intended to broadcast material or load vehicles;
- units with mechanically powered feed intake or attachments;
- units with cutting means of either one or more non-metallic filaments, or one or more non-metallic cutting elements pivotally mounted on a generally circular central drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting means of less than 10 J;
- electrical aspects of electrically
- Amendment8 pagesEnglish languagesale 10% offe-Library read for1 day