59.060.30 - Mineral and metal fibres
ICS 59.060.30 Details
Mineral and metal fibres
Mineralfasern. Metallfasern
Fibres minerales et metalliques
Rudninska in kovinska vlakna
General Information
Frequently Asked Questions
ICS 59.060.30 is a classification code in the International Classification for Standards (ICS) system. It covers "Mineral and metal fibres". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 9 standards classified under ICS 59.060.30 (Mineral and metal fibres). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
SCOPE
1.1 This specification covers the requirements for basalt fiber, including rovings and chopped strands. This specification is intended to assist ultimate users by designating the general nomenclature for the strand products that are generally manufactured in the basalt fiber industry.
1.2 Basalt fibers are produced by melting naturally occurring volcanic rocks, being primarily basalt or other basaltic rocks. The melt is drawn though a bushing and, typically, a sizing is applied to the fiber as it is cooled.
1.3 Basalt fiber strands have a variety of general uses under specific conditions, such as high physical or chemical stress, high moisture, or high temperature. Property requirements under specific conditions are agreed upon between the purchaser and the supplier.
1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems will result in non-conformance with the standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Technical specification6 pagesEnglish languagesale 15% off
ABSTRACT
This specification covers industrial woven wire cloth (also known as, wire mesh), for general use including the separation of particles. Wire cloth can be produced in many thousands of combinations of size and shape of opening, wire diameter, and made of any primary metal or metal alloy wire that is suitable for weaving. E2016 presents standard terms and definitions, notes the normal range of specifications woven, and establishes technical requirements that include wire tolerances, mesh tolerance for double-crimp square mesh, width opening tolerances for space cloth, and delivery requirements. Developed based on obsolete Federal RR-W-360A, it is the only Standard that covers wire cloth as specified and manufactured according to mesh count.
SCOPE
1.1 This specification covers industrial woven wire fabric, referred to as wire cloth, for general use including the separation of particles. Wire cloth can be made of any primary metal or metal alloy wire that is suitable for weaving. This specification does not apply to the following special types of wire cloth: filter cloth or dutch weave (see Appendix X1), fourdrinier and cylinder cloth, galvanized hardware cloth, insect wire screening, spiral weave wire cloth, testing sieve cloth, or welded wire cloth.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Technical specification29 pagesEnglish languagesale 15% off
- Technical specification29 pagesEnglish languagesale 15% off