iTeh Standards logo
EURUSD
Your shopping cart is empty.

93/89/EEC - Taxes on certain vehicles used for the carriage of goods by road and tolls and charges for the use of certain infrastructures

Taxes on certain vehicles used for the carriage of goods by road and tolls and charges for the use of certain infrastructures

General Information

Type
Directive
Category
Main
Force Date
31-Dec-1994
Official Journal Reference
L 279
Official Journal Date
11-Nov-1993

Frequently Asked Questions

An EU Directive is a legislative act of the European Union that sets out goals that all EU member states must achieve. However, it is up to each member state to devise their own laws on how to reach these goals through national transposition. Directives are used to harmonize laws across the EU, particularly for the functioning of the single market.

Directive 93/89/EEC covers "Taxes on certain vehicles used for the carriage of goods by road and tolls and charges for the use of certain infrastructures". There are 4 standards associated with this directive.

Harmonized standards under 93/89/EEC are European standards (ENs) developed by CEN, CENELEC, or ETSI in response to a mandate from the European Commission. When these standards are cited in the Official Journal of the European Union, products manufactured in conformity with them benefit from a presumption of conformity with the essential requirements of 93/89/EEC, facilitating CE marking and free movement within the European Economic Area.

Standardization Organization
ICS
Technical Committee
Mandate
50
CEN
ENV 14062-2:2001(Main)
Identification card systems - Surface transport applications - Electronic fee collection - Part 2: Message requirements
SIST ENV 14062-2:2018

This European Prestandard specifies directly or by reference the message requirements for integrated circuit(s) cards (ICCs) carrying the EFC application and related requirements for On-Board-Units (OBUs) used in Electronic Fee Collection systems based on Dedicated Short Range Communication and Global System for Mobile Communication, with the target to provide basic interoperability between an ICC and an OBU independently of the respective manufacturers and operators. It takes into consideration both environmental and system related aspects and states minimum requirements of conformity.
The requirements imposed by this Prestandard apply to
· the IC card itself, denoted by the abbreviation ICC ;
· the in-vehicle card interface device, denoted by the abbreviation OBU ; or
· the combination of both.
This Prestandard does not directly set requirements on any other card interface device (IFD) besides the OBU e.g. stationary devices. However, the requirements imposed on the IC card may induce technical consequences for an IFD designed to accept an IC card used in EFC applications.
It specifies the respective characteristics of the ICC and OBU only as far as these may concern the interface, but does not give any internal technical implementation.

  • Standardization document
    12 pages
    English language
    e-Library read for
    1 day
CEN
ENV 14062-1:2001(Main)
Identification card systems - Surface transport applications - Electronic fee collection - Part 1: Physical characteristics, electronic signals and transmission protocols
SIST ENV 14062-1:2018

This European Prestandard specifies directly or by reference the physical characteristics, electronic signals and transmission protocols for integrated circuit(s) cards (ICCs) carrying the EFC application and related requirements for On-Board-Units (OBUs) used in Electronic Fee Collection systems based on Dedicated Short Range Communication and Global System for Mobile Communication, with the target to provide basic interoperability between an ICC and an OBU independently of the respective manufacturers and operators. It takes into consideration both environmental and system related aspects and states minimum requirements of conformity.
The requirements imposed by this Prestandard apply to :
· the IC card itself, denoted by the abbreviation ICC ;
· the in-vehicle card interface device, denoted by the abbreviation OBU ; or
· the combination of both.
This Prestandard does not directly set requirements on any other card interface device (IFD) besides the OBU e.g. stationary devices. However, the requirements imposed on the IC card may induce technical consequences for an IFD designed to accept an IC card used in EFC applications.
It specifies the respective characteristics of the ICC and OBU only as far as these may concern the interface, but does not give any internal technical implementation.

  • Standard
    13 pages
    English language
    e-Library read for
    1 day
SIST
SIST ENV 14062-1:2018(Main)
Identification card systems - Surface transport applications - Electronic fee collection - Part 1: Physical characteristics, electronic signals and transmission protocols
ENV 14062-1:2001

This European Prestandard specifies directly or by reference the physical characteristics, electronic signals and transmission protocols for integrated circuit(s) cards (ICCs) carrying the EFC application and related requirements for On-Board-Units (OBUs) used in Electronic Fee Collection systems based on Dedicated Short Range Communication and Global System for Mobile Communication, with the target to provide basic interoperability between an ICC and an OBU independently of the respective manufacturers and operators. It takes into consideration both environmental and system related aspects and states minimum requirements of conformity.
The requirements imposed by this Prestandard apply to :
· the IC card itself, denoted by the abbreviation ICC ;
· the in-vehicle card interface device, denoted by the abbreviation OBU ; or
· the combination of both.
This Prestandard does not directly set requirements on any other card interface device (IFD) besides the OBU e.g. stationary devices. However, the requirements imposed on the IC card may induce technical consequences for an IFD designed to accept an IC card used in EFC applications.
It specifies the respective characteristics of the ICC and OBU only as far as these may concern the interface, but does not give any internal technical implementation.

  • Standard
    13 pages
    English language
    e-Library read for
    1 day
SIST
SIST ENV 14062-2:2018(Main)
Identification card systems - Surface transport applications - Electronic fee collection - Part 2: Message requirements
ENV 14062-2:2001

This European Prestandard specifies directly or by reference the message requirements for integrated circuit(s) cards (ICCs) carrying the EFC application and related requirements for On-Board-Units (OBUs) used in Electronic Fee Collection systems based on Dedicated Short Range Communication and Global System for Mobile Communication, with the target to provide basic interoperability between an ICC and an OBU independently of the respective manufacturers and operators. It takes into consideration both environmental and system related aspects and states minimum requirements of conformity.
The requirements imposed by this Prestandard apply to
· the IC card itself, denoted by the abbreviation ICC ;
· the in-vehicle card interface device, denoted by the abbreviation OBU ; or
· the combination of both.
This Prestandard does not directly set requirements on any other card interface device (IFD) besides the OBU e.g. stationary devices. However, the requirements imposed on the IC card may induce technical consequences for an IFD designed to accept an IC card used in EFC applications.
It specifies the respective characteristics of the ICC and OBU only as far as these may concern the interface, but does not give any internal technical implementation.

  • Standardization document
    12 pages
    English language
    e-Library read for
    1 day
50