TP236 - Pravilnik o delih in opremi vozil

This document specifies requirements and gives the test method for medical gloves for single use in order to determine freedom from holes.

This European Standard specifies requirements for the design, testing, performance and equipping of road ambulances used for the transport, monitoring, treatment and care of patients. It contains requirements for the patient’s compartment in terms of the working environment, ergonomic design and the safety of the crew and patients.This European Standard does not cover the training of the staff which is the responsibility of the authority/authorities in the country where the ambulance is to be registered.
This European Standard is applicable to road ambulances capable of transporting at least one person on a stretcher and excludes the transportation of hospital beds.
This standard also specifies requirements for ambulances intended to carry transport incubator systems.
The European Standard covers the specific requirements of each type of road ambulance which are
designated according to the patient condition e.g. patient transport road ambulance types A1, A2, B and C.
This European Standard gives general requirements for medical devices carried in road ambulances and used therein and outside hospitals and clinics in situations where the ambient conditions can differ from normal indoor conditions.

This document specifies the minimum safety ventilation requirements for leisure accommodation vehicles.
It provides alternative methods of calculation or testing of safety ventilation.

2019-09-26 PeC: unflagged for LVD citation, includes modifications
2019-04-10 PeC: corrigendum to EN 60529:1991/A2:2013 which is cited under the LVD

This European Standard specifies requirements intended to ensure the safety and health of people when they use caravans for temporary or seasonal habitation.
It also specifies the corresponding test methods.
Requirements applicable to road safety are not included in the scope of this European Standard.
This European Standard is applicable exclusively to rigid and rigid folding caravans as defined in EN 13878.

This European Standard specifies requirements intended to ensure the safety and health of persons when they use motor caravans for temporary or seasonal habitation.
It also specifies the corresponding test methods.
Specific requirements of this European Standard apply to motor caravans where the overall length multiplied by the overall width does not exceed 13,5 m2 plan area.
Requirements applicable to road safety are not included in the scope of this European Standard.
This European Standard is applicable exclusively to motor caravans as defined in EN 13878.

This European Standard specifies safety, health and functional requirements for 12 V direct current (DC) extra low voltage (ELV) electrical installations for habitation aspects of motor caravans.
It applies only to installations which are electrically connected with the electrical installation of the base vehicle or which can be electrically connected with it by means of change-over devices.
This European Standard also specifies the ELV output requirements of low voltage (LV) equipment that may be used to provide an ELV supply but it does not specify safety, technical and functional requirements for LV appliances and installations. Requirements for LV installations are specified in HD 60364-7-721.

This European Standard defines minimum requirements for the design and performance of stretchers and other patient handling equipment used in road ambulances for the handling and carrying of patients. It aims to ensure patient safety and minimize the physical effort required by staff operating the equipment.

This European Standard specifies requirements and gives test methods for physical properties of single-use medical gloves (i.e. surgical gloves and examination/procedure gloves) in order to ensure that they provide and maintain in use an adequate level of protection from cross contamination for both patient and user.
This standard does not specify the size of a lot. Attention is drawn to the difficulties that can be associated with the distribution and control of very large lots. The recommended maximum individual lot size for production is 500 000.

This European Standard defines minimum requirements for the design and performance of power assisted stretchers used in road ambulances for the treatment and transportation of patients. It aims to ensure patient safety and minimize the physical effort required by staff operating the equipment.

This European Standard specifies the common requirements for safety and the (minimum) common performance requirements of firefighting and rescue service vehicles as designated in EN 1846-1. When drafting this European Standard it has been assumed that the finished standard automotive chassis (or the chassis designed in accordance with the same principles) that is the basis for the firefighting or rescue vehicle, offers an acceptable safety level for its basic transport functions within the limits specified by the manufacturer. Therefore, this European Standard does not formulate requirements for this chassis. This European Standard deals with all significant hazards, hazardous situations and events relevant to firefighting and rescue service vehicles, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Complementary specific requirements for aerial appliances are the subject of the following European Standards: - EN 1777: Hydraulic platforms (HPs) for fire fighting and rescue services, - EN 14043: Turntable ladders with combined movements, - EN 14044: Turntable ladders with sequential movements. These specific requirements may supplement or modify the requirements of this document and they take precedence over the corresponding requirements of this document.

This Part 1 of EN 12899 specifies requirements for complete sign assemblies (including supports), signs (sign plates with sign faces), sign plates (without sign faces) and for other major components (retroreflective sheeting, supports and luminaires).
The main intended use of fixed signs is for the instruction and guidance of road users on public and private land.
Matters not covered by this standard:
a)   sign gantry and cantilever structures;
b)   signs with discontinuous messages, e.g. using light emitting diodes (LED), or fibre optics;
c)   variable message signs;
d)   signs used for temporary purposes;
e)   foundations;
f)   tests for extremely low temperatures.

Specifies the requirements for the location and marking of the vehicle identification number (VIN) on motor vehicles, trailers, motorcycles and mopeds as defined in ISO 3833. The VIN is a structured combination of characters assigned to a vehicle by the manufacturer for identification purposes. This second edition cancels and replaces the first edition (1977).

This edition cancels and replaces the ISO Recommendation R 612-1967. Defines terms relating to dimensions of motor vehicles and towed vehicles but does not deal with methods of measurement, the units used in reporting the results, or the accuracy required, or the order of magnitude of the dimensions defined.

This European Standard specifies the requirements for the installation of liquefied petroleum gas systems for habitation purposes in leisure accommodation vehicles and for accommodation purposes in other vehicles. It details safety and health requirements on the selection of materials, components and appliances, on design considerations and tightness testing of installations and on the contents of the user's handbook. This European Standard does not cover installations supplied from other than 3rd family gases (LPG), water connections or electrical power supplies to the appliance(s). Portable appliances, incorporating their own gas supply, are not considered part of the installation and are outside the scope of this standard. It does not include the installation of LPG appliances to be used for commercial purposes or for boats. Gas supply equipment and gas appliances separate from and external to the body of the vehicle are also not considered by this standard.

This European standard specifies the calculation method of user payloads allowed, when designing caravans.
It also sets out the information relating to user payload to be included in the user's handbook.
It applies to all categories of caravan as defined in EN 13878.

This European standard specifies the calculation method of user payloads allowed, when designing motor caravans.
It also sets out the information relating to user payload to be included in the user's handbook.
It applies to motor caravans as defined in EN 13878.

This European Standard specifies requirements for installing oil-fired heating systems in caravans and mobile homes with reference to safety. It applies to installations using oil fuels as defined in EN 27418.