WG 6 - TC 59/SC 59F/WG 6

IEC 62885-9:2019 lists the characteristic performance parameters for walk-behind and ride-on floor scrubbers and sweepers and other floor cleaning machines in accordance with IEC 60335-2-72:2016.
The intent is to serve the manufacturers in describing parameters for their manuals and their literature. This may include all or some of the parameters listed in this definition document.
This first edition of IEC 62885-9 cancels and replaces IEC 62826:2014 and constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC 62826:2014
a) reference to a dated version of IEC 60335-2-72 to ensure consistency between the two standards;
b) a new calculation for the nominal current consumption in 22.1;
c) a new calculation for the maximum net run-time of commercial floor treatment machines in 22.2;
d) update of the Bibliography.

IEC 62885-8:2019 is applicable for measurements of the performance of mains-operated dry vacuum cleaners, including water filter vacuum cleaners, for commercial use. The requirements for the construction and testing covered by this document are applied in addition to the requirements for commercial vacuum cleaners in IEC 60335-2-69.
The purpose of this document is to specify essential performance characteristics of dry vacuum cleaners for commercial use that are of interest to operators and to describe methods for measuring these characteristics.
Due to the influence of environmental conditions, variations in time, origin of test materials and proficiency of the operator, some of the described test methods will give more reliable results when applied for comparative testing of a number of appliances at the same time, in the same laboratory and by the same operator.
The methods here can be applied with modifications for surface-cleaning product types or technologies not currently covered within the scope.
For safety requirements, reference is made to IEC 60335-1 and IEC 60335-2-69.
This first edition cancels and replaces IEC PAS 62611, published in 2009.

IEC 62885-5:2018 lists the characteristic performance parameters for high pressure cleaners and steam cleaners in accordance with IEC 60335-2-79.
The intent is to serve the manufacturers in describing parameters that fit in their manuals and in their literature. This can include all or some of the parameters listed in this definition document.

IEC 62826:2014 lists the characteristic performance parameters for walk-behind and ride-on floor scrubbers and sweepers and other floor cleaning machines according to IEC 60335-2-72. This standard does not apply to IEC 60312 series. The intent is to serve the manufacturers in describing parameters that fit in their manuals, and in their literature. This may include all or some of the parameters listed in this definition document. When any of the parameters listed in this document are used, they are noted as being measurements made in accordance with this document.

IEC/PAS 62611:2009(E) gives essential performance characteristics of vacuum cleaners being of interest to the users and to describe methods for measuring these characteristics.