WG 4 - ISO/IEC JTC 1/SC 25/WG 4

ISO/IEC 14165-432:2022 is one of the Fibre Channel family of standards. This standard describes the protocols used to implement security in a Fibre Channel fabric. This standard includes the definition of protocols to authenticate Fibre Channel entities, protocols to set up session keys, protocols to negotiate the parameters required to ensure frame-by-frame integrity and confidentiality, and protocols to establish and distribute policies across a Fibre Channel fabric.

ISO/IEC 11760-103:2021 specifies the command set host systems use to access storage devices. It provides a common command set for systems manufacturers, system integrators, software suppliers, and suppliers of intelligent storage devices. This standard maintains compatibility with the ACS-2 standard, ISO/IEC 17760-102, while providing additional functions.

ISO/IEC 14776-415:2019 defines a reference model that specifies common behaviors for SCSI devices, and an abstract structure that is generic to all SCSI I/O system implementations.The set of Small Computer System Interface (SCSI) specifies the interfaces, functions, and operations necessary to ensure interoperability between conforming SCSI implementations. This document is a functional description. Conforming implementations employ any design technique that does not violate interoperability.
The following concepts from previous versions of the SAM standard are made obsolete by this version:
a) support for the SPI-5 SCSI transport protocol;
b) Contingent Allegiance;
c) the TARGET RESET task management function;
d) basic task management model;
e) untagged tasks; and
f) linked command function.

ISO/IEC 14776-481:2019 defines a device model that is applicable to all SCSI devices. Other command standards expand on the general SCSI device model in ways appropriate to specific types of SCSI devices.
ISO/IEC 14776 (all parts) specifies the interfaces, functions, and operations necessary to ensure interoperability between conforming SCSI implementations. This document is a functional description. Conforming implementations employ any design technique that does not violate interoperability.
This document defines security features for use by all SCSI devices. This document defines the security model that is basic to every device model and the parameter data that applies to any device model. For additional information on the security goals and threat model discussed in this document see Annex A.

ISO/IEC 14776-224:2019(E) defines the Small computer system interface (SCSI) Fibre Channel Protocol (FCP). This standard defines how the Fibre Channel services and the defined Information Units (IUs) are used to perform the services defined by the SCSI Architecture Model - 5 (SAM-5). This fourth version includes additions and clarifications to the third version (ISO/IEC 14776-223:2008), removes information that is now contained in other standards, and describes additional error recovery capabilities for the Fibre Channel Protocol.

ISO/IEC 14776-154:2017(E) This document specifies the functional requirements for the Serial Attached SCSI (SAS) physical interconnect, which is compatible with the Serial ATA physical interconnect. The SAS Protocol Layer - 3 (SPL-3) standard documents the SAS protocol layer corresponding to the Serial Attached SCSI - 3 (SAS-3), defining the rules for exchanging information between SCSI devices using a serial interconnect.

ISO/IEC 14165-151:2017(E) This part of ISO/IEC 14165 describes extensions to the Fibre Channel signaling and physical layer requirements defined in ISO/IEC 14165-142 to transport Fibre Channel over the commonly available 4-pair balanced copper cablings specified in ISO/IEC 11801:2002 and TIA/EIA-568-B.2-2001. This standard is one of the Fibre Channel family of standards.