WG 7 - TC 23/SC 23E/WG 7

IEC 62752:2024 This International Standard applies to in-cable control and protection devices (IC-CPDs) for mode 2 charging of electric road vehicles, hereafter referred to as "IC-CPD", including control and safety functions.
This document applies to portable devices performing simultaneously the functions of detection of the residual current, of comparison of the value of this current with the residual operating value and of opening of the protected circuit when the residual current exceeds this value.
This second edition cancels and replaces the first edition published in 2016, and Amendment 1:2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- Subclause 8.3.1 revised to add requirements for a mandatory control device that detects the temperature of the current carrying parts in the household plug;
- Test requirements added in a new Subclause 9.36 for the temperature control device;
- Harmonization of EMC requirements with new edition of IEC 61543 and IEC 61851-21-2;
- General improvement of test and requirements.

IEC 62752:2016 applies to in-cable control and protection devices (IC-CPDs) for mode 2 charging of electric road vehicles, hereafter referred to as IC-CPD including control and safety functions. This standard applies to portable devices performing simultaneously the functions of detection of the residual current, of comparison of the value of this current with the residual operating value and of opening of the protected circuit when the residual current exceeds this value.
The contents of the corrigendum of February 2019 have been included in this copy.