SIST EN ISO 20863:2018

SLOVENSKI STANDARD
SIST EN ISO 20863:2018
01-julij-2018
1DGRPHãþD
SIST EN ISO 20863:2005
2EXWHY3UHVNXVQHPHWRGH]DRMDþLWYHYSHWQHPLQSUVWQHPGHOXþHYOMD
9H]OMLYRVW,62
Footwear - Test methods for stiffeners and toepuffs - Bondability (ISO 20863:2018)
Schuhe - Prüfverfahren für Hinterkappen und Zehenkappen - Klebefestigkeit (ISO
20863:2018)
Chaussures - Méthodes d'essai pour contreforts et renforts - Aptitude au collage (ISO
20863:2018)
Ta slovenski standard je istoveten z: EN ISO 20863:2018
ICS:
61.060 Obuvala Footwear
SIST EN ISO 20863:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 20863:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 20863:2018


EN ISO 20863
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2018
EUROPÄISCHE NORM
ICS 61.060 Supersedes EN ISO 20863:2004
English Version

Footwear - Test methods for stiffeners and toepuffs -
Bondability (ISO 20863:2018)
Chaussures - Méthodes d'essai pour contreforts et Schuhe - Prüfverfahren für Hinterkappen und
bouts-durs - Aptitude au collage (ISO 20863:2018) Zehenkappen - Klebefestigkeit (ISO 20863:2018)
This European Standard was approved by CEN on 17 February 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20863:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 20863:2018
EN ISO 20863:2018 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 20863:2018
EN ISO 20863:2018 (E)
European foreword
This document (EN ISO 20863:2018) has been prepared by Technical Committee ISO/TC 216
“Footwear” in collaboration with Technical Committee CEN/TC 309 “Footwear” the secretariat of which
is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2018, and conflicting national standards
shall be withdrawn at the latest by November 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 20863:2004.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 20863:2018 has been approved by CEN as EN ISO 20863:2018 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 20863:2018

---------------------- Page: 6 ----------------------

SIST EN ISO 20863:2018
INTERNATIONAL ISO
STANDARD 20863
Second edition
2018-03
Footwear — Test methods for
stiffeners and toepuffs — Bondability
Chaussures — Méthodes d'essai pour contreforts et bouts-durs —
Aptitude au collage
Reference number
ISO 20863:2018(E)
©
ISO 2018

---------------------- Page: 7 ----------------------

SIST EN ISO 20863:2018
ISO 20863:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 20863:2018
ISO 20863:2018(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus and materials. 1
5 Sampling and conditioning . 2
5.1 Method 1: Heat activated materials . 2
5.2 Method 2: Solvent activated materials . 2
6 Procedure. 3
7 Expression of results . 3
7.1 Dry bondability . 3
7.2 Wet bondability . 4
8 Test report . 4
Bibliography . 5
© ISO 2018 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 20863:2018
ISO 20863:2018(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International
...