iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 18393-1:2024

(Main)

Thermal insulation products - Determination of settlement - Part 1: Loose-fill insulation for ventilated attics simulating humidity and temperature cycling (ISO 18393-1:2023)

Thermal insulation products - Determination of settlement - Part 1: Loose-fill insulation for ventilated attics simulating humidity and temperature cycling (ISO 18393-1:2023)

This document specifies a test method for the determination of settlement of loose-fill insulation applied
horizontally in ventilated attics. This test method measures the effects of humidity and temperature
cycling.

Wärmedämmprodukte - Bestimmung der Alterung durch Setzung - Teil 1: Eingeblasene lose Wärmedämmstoffe für belüftete Dachgeschosse, zyklische Luftfeuchte- und Temperaturbeanspruchungen (ISO 18393-1:2023)

Dieses Dokument legt ein Prüfverfahren zur Bestimmung der Setzung von losen Wärmedämmstoffen bei horizontaler Anwendung in belüfteten Dachgeschossen fest. Mit Hilfe dieses Prüfverfahrens werden die Auswirkungen von zyklischen Luftfeuchte- und Temperaturbeanspruchungen gemessen.

Produits isolants thermiques - Détermination du tassement - Partie 1: Isolant en vrac pour combles ventilés, cyclage en température et humidité (ISO 18393-1:2023)

Le présent document spécifie une méthode d’essai pour déterminer le tassement d'un isolant en vrac, appliqué horizontalement dans les combles ventilés. Cette méthode d’essai mesure les effets des variations cycliques de température et d’humidité.

Toplotnoizolacijski proizvodi - Določanje posedanja - 1. del: Nevezana izolacija za prezračevana podstrešja, ki simulira nihanje vlažnosti in temperature (ISO 18393-1:2023)

Ta dokument določa preskusno metodo za določanje posedanja nevezane izolacije, izvedene vodoravno v prezračevanih podstrešjih. S preskusno metodo se merijo učinki ciklov vlage in temperature.

General Information

Status
Published
Publication Date
01-Feb-2024
ICS
91.120.10 - Thermal insulation of buildings
Technical Committee
TOP - Thermal insulation
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
22-Dec-2023
Due Date
26-Feb-2024
Completion Date
02-Feb-2024
Ref Project
EN ISO 18393-1:2023 - Thermal insulation products - Determination of settlement - Part 1: Loose-fill insulation for ventilated attics simulating humidity and temperature cycling (ISO 18393-1:2023)

Buy Standard

EN ISO 18393-1:2024EN ISO 18393-1:2024
PreviousNext
Standard
EN ISO 18393-1:2024
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 18393-1:2024
01-marec-2024
Toplotnoizolacijski proizvodi - Določanje posedanja - 1. del: Nevezana izolacija za
prezračevana podstrešja, ki simulira nihanje vlažnosti in temperature (ISO 18393-
1:2023)
Thermal insulation products - Determination of settlement - Part 1: Loose-fill insulation
for ventilated attics simulating humidity and temperature cycling (ISO 18393-1:2023)
Wärmedämmprodukte - Bestimmung der Alterung durch Setzung - Teil 1: Eingeblasene
lose Wärmedämmstoffe für belüftete Dachgeschosse, zyklische Luftfeuchte- und
Temperaturbeanspruchungen (ISO 18393-1:2023)
Produits isolants thermiques - Détermination du tassement - Partie 1: Isolant en vrac
pour combles ventilés, cyclage en température et humidité (ISO 18393-1:2023)
Ta slovenski standard je istoveten z: EN ISO 18393-1:2023
ICS:
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
SIST EN ISO 18393-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 18393-1:2024

---------------------- Page: 2 ----------------------
SIST EN ISO 18393-1:2024


EN ISO 18393-1
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2023
EUROPÄISCHE NORM
ICS 91.120.10
English Version

Thermal insulation products - Determination of settlement
- Part 1: Loose-fill insulation for ventilated attics
simulating humidity and temperature cycling (ISO 18393-
1:2023)
Produits isolants thermiques - Détermination du Wärmedämmprodukte - Bestimmung der Alterung
tassement - Partie 1: Isolant en vrac pour combles durch Setzung - Teil 1: Eingeblasene lose
ventilés, cyclage en température et humidité (ISO Wärmedämmstoffe für belüftete Dachgeschosse,
18393-1:2023) zyklische Luftfeuchte- und
Temperaturbeanspruchungen (ISO 18393-1:2023)
This European Standard was approved by CEN on 18 November 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18393-1:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 18393-1:2024
EN ISO 18393-1:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 18393-1:2024
EN ISO 18393-1:2023 (E)
European foreword
This document (EN ISO 18393-1:2023) has been prepared by Technical Committee ISO/TC 163
"Thermal performance and energy use in the built environment" in collaboration with Technical
Committee CEN/TC 88 “Thermal insulating materials and products” the secretariat of which is held by
DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2024, and conflicting national standards shall be
withdrawn at the latest by June 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 52016-3:2024(Main)
Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 3: Calculation procedures regarding adaptive building envelope elements (ISO 52016-3:2023)
EN ISO 52016-3:2023

This document specifies procedures for the calculation of the energy needs for heating and cooling,
internal temperatures and sensible and latent heat loads of a building according to the hourly
calculation methodology in ISO 52016-1. Additions or modifications of the calculations are provided
in this document if the building envelope contains one or more adaptive building envelope elements
(building envelope elements with adaptive components that are either environmentally or actively
controlled as a function of specific conditions). The adaptive building envelope element replaces the
transparent building element in the calculation according to ISO 52016-1.
The three types of adaptive building envelope elements covered in this document are:
— building envelope elements with dynamic solar shading;
— building envelope elements with chromogenic glazing;
— building envelope elements with an actively ventilated cavity.
Environmentally activated control is described for building envelope elements with chromogenic
glazing, but can also occur for other types of adaptive building envelope elements. In that case the same
approach applies as for environmentally activated chromogenic glazing.
This document is applicable to the assessment of the energy performance of buildings (EPB) (energy
performance labels and certificates), including comparison between buildings and checking conformity
with minimum energy performance criteria.
It is also applicable to assess the contribution of the adaptive building envelope element to the smart
readiness of a building.
In addition, this document provides indicators for the impact of the adaptive building envelope element
on the performance of the building compared to a reference building envelope element. It is applicable
to buildings at the design stage, to new buildings after construction and to existing buildings in the use
phase.
This document is not applicable to geometrically complex adaptive building envelope elements that can
only be modelled as multiple coupled thermal zones.
NOTE The background to the selection of adaptive building envelope elements is given in ISO/TR 52016-4.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6781-1:2023(Main)
Performance of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods - Part 1: General procedures (ISO 6781-1:2023)
EN ISO 6781-1:2023

This document specifies requirements and methodologies for infrared thermographic services for
detection of heat, air and moisture irregularities in buildings that help users to specify and understand
a) the extent of thermographic services required,
b) the type and condition of equipment available for use,
c) the qualifications of equipment operators, image analysts, and report authors and those making
recommendations, and
d) the reporting of results.
It provides guidance to understanding and utilizing the final results stemming from provision of the
thermographic services.
This document is applicable to the general procedures for infrared thermographic methods as can be
applied to residential, commercial, and institutional and special use buildings.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9288:2022(Main)
Thermal insulation - Heat transfer by radiation - Vocabulary (ISO 9288:2022)
EN ISO 9288:2022

This document defines physical quantities and other terms in the field of thermal insulation relating to
heat transfer by radiation.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12241:2022(Main)
Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:2022)
EN ISO 12241:2022

This document gives rules for the calculation of heat-transfer-related properties of building equipment
and industrial installations, predominantly under steady-state conditions. This document also gives a
simplified approach for the calculation of thermal bridges

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST 1191:2022(Main)
Thermal insulating materials for building applications - Requirements for the properties of thermal insulating materials according to their field of application

Ta dokument določa zahteve, povezane z uporabo tovarniško izdelanih toplotnoizolacijskih materialov
za stavbe po SIST EN 13162, SIST EN 13163, SIST EN 13164, SIST EN 13165, SIST EN 13166, SIST
EN 13167, SIST EN 13168, SIST EN 13169, SIST EN 13170 SIST EN 13171, SIST EN 16069, in za na
mestu vgradnje izdelane toplotnoizolacijske materiale za stavbe po SIST EN 14063-1, SIST EN 14064-
1, SIST EN 14315-1, SIST EN 14316-1, SIST EN 14317-1, SIST EN 14318-1, prav tako določa zahteve
evropskih ocenjevalnih dokumentov EAD 040729 -00-1201, EAD 040461-00-1201, EAD 040138-00-
1201, EAD 040138-01-1201, in EAD 040005-00-1201, EAD 040146-00-1201, EAD 040650-00-1201,
EAD 040773-00-1201 ter EAD 040777-00-1201 in dodeljuje področja uporabe toplotnoizolacijskih
materialov, označenih s kraticami.
Toplotnoizolacijski materiali se lahko uporabljajo za različne namene. Ta standard opredeljuje
minimalne zahteve za posamezna področja uporabe v gradbeništvu.
OPOMBA: Na ta način lahko načrtovalci in uporabniki toplotnoizolacijskih materialov izberejo ustrezne vrste uporabe.
Ta dokument ne ureja uporabe toplotnoizolacijskih materialov za tehnično stavbno opremo in tehnične
stavbne sisteme.
Ta dokument ne ureja uporabe toplotnoizolacijskih materialov, za katere ne velja ustrezen harmoniziran
evropski standard ali evropski ocenjevalni dokument (EAD).
Ta dokument ne ureja uporabe toplotnoizolacijskih materialov v zunanjih toplotnoizolacijskih
kompozitnih sistemih (ETICS).
V posameznih primerih lahko drugi predpisi nalagajo višje zahteve. Načrtovalci in investitorji lahko tudi
postavijo višje zahteve.

  • Standard
    49 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9229:2020(Main)
Thermal insulation - Vocabulary (ISO 9229:2020)
EN ISO 9229:2020

This document provides a vocabulary of terms used in the field of thermal insulation that covers
materials, products, components and applications. Some of the terms can have a different meaning
when used in other industries or applications.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 18523-1:2020
Energy performance of buildings -- Schedule and condition of building, zone and space usage for energy calculation -- Part 1: Non-residential buildings
ISO 18523-1:2016

ISO 18523-1:2016 specifies the formats to present schedule and condition of building, zone and space usage, which is to be referred to as input data of energy calculations for non-residential buildings.
The schedule and condition include schedules of occupancy, operation of technical building systems, ventilation rate, hot water usage and internal heat gains due to occupancy, lighting and equipment.
ISO 18523-1:2016 also gives categories of building, zone and space according to differentiating schedule and condition.
Depending on necessary minuteness of the energy calculation, different levels of schedule and condition from the view point of time and space averaging are specified.
The values and categories for the schedule and condition are given in annexes for more information for the application when the users of this document do not have detailed information on the values and categories for the schedule and condition.
The schedule and condition in this document is basically different from assumptions in order to determine the size of technical building systems in the process of design, where possible largest values are to be assumed. Instead, most usual and average values, which are assumed for the building energy calculation, are dealt with in this document.

  • Standard
    259 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    253 pages
    English language
    sale 15% off
SIST
SIST ISO 18523-2:2020
Energy performance of buildings -- Schedule and condition of building, zone and space usage for energy calculation -- Part 2: Residential buildings
ISO 18523-2:2018

ISO 18523-2:2018 specifies the formats to present the schedule and conditions of zone and space usage (referred to as input data of energy calculations) for residential buildings.
The schedule and conditions include schedules of occupancy, operation of technical building systems, ventilation rates, hot water usage, usage of appliances and internal heat gains due to occupancy, lighting and appliances. The schedule and conditions for lighting are applicable to fixed installed lighting fixtures.
ISO 18523-2:2018 also gives categories of residential building, zone and space according to differentiating schedule and condition. For residential buildings or its housing units which contain any category of space or zone of non-residential buildings, ISO 18523‑1 applies.
Depending on necessary minuteness of the energy calculation, different levels of schedule and condition from the view point of time and space averaging are specified.
The values and categories for the schedule and condition are included informatively.
NOTE The schedule and condition in this document is basically different from assumptions in order to determine the size of technical building systems in the process of design, where possible largest or smallest values are assumed. Instead, most usual and average values, which are assumed for the building energy calculation, are dealt with in this document.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    33 pages
    English language
    sale 15% off
SIST
SIST EN ISO 7345:2018(Main)
Thermal performance of buildings and building components - Physical quantities and definitions (ISO 7345:2018)
EN ISO 7345:2018

This International Standard defines physical quantities used in the field thermal performance of
buildings and building elements, and gives the corresponding Symbols and units.
NOTE Because the scope of this International Standard is restricted to thermal performance and energy use
in the built environment, some of the definitions given in clause 2 differ from those given ISO 80000-5 Quantities
and units - Part 5: Thermodynamics (ISO 80000-5:2007).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12569:2018(Main)
Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method (ISO 12569:2017)
EN ISO 12569:2017

This document establishes methods to obtain the ventilation rate or specific airflow rate in a building
space (which is considered to be a single zone) using a tracer gas.
The measurement methods apply for spaces where the combined conditions concerning the uniformity
of tracer gas concentration, measurement of the exhaust gas concentration, effective mixed zone and/or
fluctuation of ventilation are satisfied.
This document provides three measurement methods using a tracer gas: concentration decay method,
continuous dose method, and constant concentration method.
NOTE Specific measurement conditions are given in Table 1.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day