SIST EN 60317-48:2012
(Amendment)Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155
Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155
IEC 60317-48:2012 specifies requirements of glass-fibre wound resin or varnish impregnated, bare, grade 1 or grade 2 enamelled round copper winding wire, temperature index 155. The impregnating agent can be, for instance, polyester or polyesterimide resin based. For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified. This edition includes the following significant technical changes with respect to the previous edition: - new subclause containing general notes on winding wire, - formerly part of the scope, - new subclause containing requirements for appearance, - new Clause 23, Pin hole test. Keywords: copper winding wire
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 48: Runddrähte aus Kupfer, blank oder lackisoliert, umhüllt mit Glasgewebe und imprägniert, Klasse 155
Spécifications pour types particuliers de fils de bobinage - Partie 48: Fil de section circulaire en cuivre nu ou émaillé, recouvert d'un guipage de fibres de verre imprégnées de résine ou de vernis, indice de température 155
La CEI 60317-48:2012 spécifie les exigences relatives au fil de bobinage en cuivre nu ou émaillé de grade 1 ou de grade 2, recouvert d'un guipage de fibres de verre imprégnées de résine ou de vernis, indice de température 155. Le produit d'imprégnation peut être, par exemple, une résine de base polyester ou polyesterimide. Pour ce type de fil, l'essai de choc thermique n'est pas approprié et c'est la raison pour laquelle, il n'est pas possible d'établir une température de choc thermique. Par conséquent, il n'est pas possible de spécifier une classe fondée sur les exigences d'indice de température et de température de choc thermique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - un nouveau paragraphe contenant des notes générales sur le fil de bobinage intégrées auparavant au domaine d'application, - un nouveau paragraphe contenant des exigences de l'aspect, - un nouvel Article 23, Détection des microfissures Mots cle: fil de bobinage en cuivre
Specifikacije za posebne vrste navitij - 48. del: Bakrena žica z okroglim prerezom, gola ali emajlirana, ovita z optičnimi vlakni in impregnirana s smolo ali lakom, temperaturni indeks 155
Ta del standarda IEC 60317 določa zahteve za bakreno žico, navito z optičnimi vlakni, s smolo ali posteklino impregnirano, golo, razreda 1 ali 2, emajlirano bakreno žico z okroglim prerezom, toplotni indeks 155. Impregnacijski premaz je lahko na primer osnovan na poliestrski ali poliesteramidski smoli.
General Information
- Status
- Published
- Publication Date
- 25-Oct-2012
- Technical Committee
- I09 - Imaginarni 09
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 24-Oct-2012
- Due Date
- 29-Dec-2012
- Completion Date
- 26-Oct-2012
Relations
- Effective Date
- 01-Dec-2012
Overview
EN 60317-48:2012 (CLC adoption of IEC 60317-48:2012) defines specifications for glass-fibre wound, resin or varnish impregnated, bare or enamelled round copper winding wire with a temperature index of 155. It applies to bare copper or grade 1/grade 2 enamelled round wires where the glass-fibre covering is impregnated (for example with polyester or polyesterimide resins). The edition clarifies general notes on winding wire, adds appearance requirements and introduces a new Pin hole test (Clause 23). Note: the heat shock test is not appropriate for this type of wire, so a heat shock temperature/class cannot be specified.
Key topics and technical requirements
The standard sets out mandatory topics and test areas that apply to this particular copper winding wire type (read alongside EN/IEC 60317-0-6:2001 + A1:2006):
- Materials and construction: glass-fibre covering types (single or double layer), impregnating agents, enamel grades (bare, grade 1, grade 2).
- Temperature index: minimum index 155 for both enamel and impregnating agent.
- Tests and properties (as listed in the standard): dimensions, electrical resistance, elongation, springiness, flexibility and adherence, cut-through, resistance to abrasion and solvents, breakdown voltage, continuity of insulation, temperature index verification, resistance to refrigerants, solderability, heat/solvent bonding, dielectric dissipation, resistance to hydrolysis and transformer oil, loss of mass.
- Appearance: new subclause specifying visual acceptance criteria for wound and impregnated wire.
- Pin hole test: introduced as Clause 23 to detect defects in insulation/impregnation.
- Packaging: requirements and references to packaging standards.
Practical applications and users
EN 60317-48:2012 is primarily used by:
- Manufacturers of copper winding wire and insulating systems to define product specification and quality control for glass-fibre wound, impregnated wires.
- Motor, transformer and coil designers specifying winding materials where enhanced mechanical reinforcement and thermal properties are required.
- Procurement/specification engineers writing supply contracts and inspection criteria for copper winding wire.
- Testing laboratories and conformity assessors performing the referenced tests (including the new pin hole test) and verifying temperature index compliance.
This standard helps ensure consistent performance of copper winding wire in electrical equipment where a temperature index of 155 is required.
Related standards
- EN/IEC 60317 series (Specifications for particular types of winding wires)
- IEC/EN 60317-0-6:2001 + A1:2006 (General requirements for glass-fibre wound, impregnated wires)
- IEC 60851 series (Test methods for winding wires)
- IEC 60264 series (Packaging of winding wires)
Keywords: copper winding wire, glass-fibre wound, resin impregnated, varnish impregnated, temperature index 155, pin hole test, winding wire specifications.
Frequently Asked Questions
SIST EN 60317-48:2012 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155". This standard covers: IEC 60317-48:2012 specifies requirements of glass-fibre wound resin or varnish impregnated, bare, grade 1 or grade 2 enamelled round copper winding wire, temperature index 155. The impregnating agent can be, for instance, polyester or polyesterimide resin based. For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified. This edition includes the following significant technical changes with respect to the previous edition: - new subclause containing general notes on winding wire, - formerly part of the scope, - new subclause containing requirements for appearance, - new Clause 23, Pin hole test. Keywords: copper winding wire
IEC 60317-48:2012 specifies requirements of glass-fibre wound resin or varnish impregnated, bare, grade 1 or grade 2 enamelled round copper winding wire, temperature index 155. The impregnating agent can be, for instance, polyester or polyesterimide resin based. For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified. This edition includes the following significant technical changes with respect to the previous edition: - new subclause containing general notes on winding wire, - formerly part of the scope, - new subclause containing requirements for appearance, - new Clause 23, Pin hole test. Keywords: copper winding wire
SIST EN 60317-48:2012 is classified under the following ICS (International Classification for Standards) categories: 29.060.10 - Wires. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 60317-48:2012 has the following relationships with other standards: It is inter standard links to SIST EN 60317-48:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 60317-48:2012 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2012
1DGRPHãþD
SIST EN 60317-48:2001
6SHFLILNDFLMH]DSRVHEQHYUVWHQDYLWLMGHO %DNUHQDåLFD]RNURJOLPSUHUH]RP
JRODDOLHPDMOLUDQDRYLWD]RSWLþQLPLYODNQLLQLPSUHJQLUDQDVVPRORDOLODNRP
WHPSHUDWXUQLLQGHNV
Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or
varnish impregnated, bare or enamelled round copper wire, temperature index 155
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 48:
Runddrähte aus Kupfer, blank oder lackisoliert, umhüllt mit Glasgewebe und imprägniert,
Klasse 155
Spécifications pour types particuliers de fils de bobinage - Partie 48: Fil de section
circulaire en cuivre nu ou émaillé, recouvert d'un guipage de fibres de verre imprégnées
de résine ou de vernis, indice de température 155
Ta slovenski standard je istoveten z: EN 60317-48:2012
ICS:
29.060.10 Žice Wires
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60317-48
NORME EUROPÉENNE
October 2012
EUROPÄISCHE NORM
ICS 29.060.10 Supersedes EN 60317-48:2000
English version
Specifications for particular types of winding wires -
Part 48: Glass-fibre wound resin or varnish impregnated, bare or
enamelled round copper wire, temperature index 155
(IEC 60317-48:2012)
Spécifications pour types particuliers Technische Lieferbedingungen für
de fils de bobinage - bestimmte Typen von Wickeldrähten -
Partie 48: Fil de section circulaire en Teil 48: Runddrähte aus Kupfer, blank
cuivre nu ou émaillé, recouvert d'un oder lackisoliert, umhüllt mit Glasgewebe
guipage de fibres de verre imprégnées und imprägniert, Klasse 155
de résine ou de vernis, indice (IEC 60317-48:2012)
de température 155
(CEI 60317-48:2012)
This European Standard was approved by CENELEC on 2012-08-13. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-48:2012 E
Foreword
The text of document 55/1326/FDIS, future edition 2 of IEC 60317-48, prepared by IEC/TC 55
"Winding wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2013-05-13
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-08-13
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60317-48:2000.
EN 60317-48:2000:
- new subclause containing general notes on winding wire, formerly part of the scope;
- new subclause containing requirements for appearance;
new Clause 23, Pin hole test.
This standard is to be read in conjunction with EN 60317-0-6:2001 + A1:2006.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60317-48:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60264 Series NOTE Harmonised as EN 60264 Series (not modified).
IEC 60317 Series NOTE Harmonised as EN 60317 Series (not modified).
IEC 60317-8:2010 NOTE Harmonised as EN 60317-8:2010 (not modified).
IEC 60317-13:2010 NOTE Harmonised as EN 60317-13:2010 (not modified).
IEC 60851 Series NOTE Harmonised as EN 60851 Series (not modified).
- 3 - EN 60317-48:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60317-0-6 2001 Specifications for particular types EN 60317-0-6 2001
+ A1 2006 of winding wires - + A1 2006
Part 0-6: General requirements - Glass-fibre
wound resin or varnish impregnated, bare
or enamelled round copper wire
IEC 60317-48 ®
Edition 2.0 2012-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Specifications for particular types of winding wires –
Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled
round copper wire, temperature index 155
Spécifications pour types particuliers de fils de bobinage –
Partie 48: Fil de section circulaire en cuivre nu ou émaillé, recouvert d'un
guipage de fibres de verre imprégnées de résine ou de vernis, indice de
température 155
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX J
ICS 29.060.10 ISBN 978-2-83220-217-3
– 2 – 60317-48 IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, general notes and appearance . 6
3.1 Terms and definitions . 6
3.2 General notes . 6
3.2.1 Methods of test . 6
3.2.2 Winding wire . 6
3.3 Appearance . 7
4 Dimensions . 7
5 Electrical resistance . 7
6 Elongation . 7
7 Springiness . 7
8 Flexibility and adherence . 7
9 Heat shock . 7
10 Cut-through . 7
11 Resistance to abrasion . 7
12 Resistance to solvents . 7
13 Breakdown voltage . 8
14 Continuity of insulation . 8
15 Temperature index . 8
16 Resistance to refrigerants . 8
17 Solderability . 8
18 Heat or solvent bonding . 8
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...